Lumileds DS117 Chip-scale packages for maximum design flexibility Datasheet

ILLUMINATION
LUXEON FlipChip White
Chip-scale packages for maximum
design flexibility
LUXEON FlipChip White enables the next generation of lighting applications.
Lumileds industry-leading line of Chip Scale Package (CSP) LEDs gives
customers complete design flexibility. LUXEON FlipChip White includes
the highest flux-density chip scale package, maximizing beam control and
enabling high packing density on a PCB. Its wide viewing angle delivers
increased uniformity and potential for system cost reductions in diffuse
and omnidirectional lighting applications. In addition, LUXEON FlipChip
White is the ideal choice for cost sensitive applications as it can achieve
high efficacy and flux at high current density, providing leading lm/$.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Direct attach — no wire bonds for high reliability
Downlights
Micro sized: 1.4mm x 1.4mm and 1.1mm x 1.1mm packages for
design flexibilty and high packing density
High Bay & Low Bay
Small source size for highest luminance and beam control
Lamps
Wide viewing angle provides increased uniformity
Outdoor
High efficacy at high drive current provides leading system level lm/$
Specialty Lighting
Low thermal resistance down to 2°C/W for LUXEON FlipChip White 10
Spotlights
DS117 LUXEON FlipChip White Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bin Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tape and Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON FlipChip White LEDs are tested and binned with a DC drive current of 175mA for LUXEON FlipChip White 05 and 350mA
for LUXEON FlipChip White 10 at a junction temperature, Tj, of 85ºC. LUXEON FlipChip White is specified based on measurements
on a ceramic tile with high reflective surface.
Part Number Nomenclature
Part numbers for LUXEON FlipChip White follow the convention below:
L A F 2 – B B C C D D 0 0 0 0 0 0 0
Where:
A
–
designates packaging option (0=bin sheet, 1=tape and reel)
B B –
designates nominal CCT (27=2700K, 30=3000K, 40=4000K)
C C –
designates minimum CRI performance (70=70CRI, 80=80CRI)
D D –
designates product (05=LUXEON FlipChip White 05, 10=LUXEON FlipChip White 10)
Therefore, the following part number is used for a LUXEON FlipChip 10 3000K 80CRI, packaged in a tape and reel:
L 1 F 2 – 3 0 8 0 1 0 0 0 0 0 0 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON FlipChip
White is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON FlipChip White at test current, Tj=85ºC.
LUMINOUS FLUX [1] (lm)
PRODUCT
TYPICAL
LUMINOUS
EFFICACY
(lm/W)
TYPICAL
LUMINOUS
FLUX (lm)
NOMINAL
CCT
MINIMUM
CRI [1, 2]
MINIMUM
4000K
70
57
60
124
106
105
175
LxF2-4070050000000
2700K
80
45
49
101
86
86
175
LxF2-2780050000000
3000K
80
47
53
109
94
94
175
LxF2-3080050000000
4000K
70
120
135
139
238
118
350
LxF2-4070100000000
5000K
70
120
137
141
242
120
350
LxF2-5070100000000
5700K
70
120
137
141
242
120
350
LxF2-5770100000000
2700K
80
90
108
111
189
94
350
LxF2-2780100000000
3000K
80
100
114
118
200
99
350
LxF2-3080100000000
4000K
80
104
121
124
212
106
350
LxF2-4080100000000
TYPICAL
TEST CURRENT
LUXEON
FlipChip
White
05
LUXEON
FlipChip
White
10
TYPICAL
LUMINOUS
TEST
EFFICACY CURRENT
(lm/W)
(mA)
2X TEST CURRENT
PART NUMBER
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
Optical Characteristics
Table 2. Optical characteristics for LUXEON FlipChip White at test current, Tj=85°C.
PART NUMBER
TYPICAL TOTAL INCLUDED ANGLE [1]
TYPICAL VIEWING ANGLE [2, 3]
LxF2-xxxxxx0000000
168°
148°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Radiation pattern slice measured in the plane parallel to one of the four sides of
the emitter.
3. Represents optical characteristics when mounted on a silver reflective substrate.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON FlipChip White at test current, Tj=85ºC.
FORWARD VOLTAGE (V) [1]
MINIMUM
TYPICAL
MAXIMUM
TYPICAL TEMPERATURE
COEFFICIENT OF FORWARD
VOLTAGE (mV/°C) [2]
LxF2-xxxx050000000
2.50
2.77
3.10
-1.9
4
LxF2-xxxx100000000
2.50
2.77
3.10
-1.9
2
PART NUMBER
TYPICAL THERMAL
RESISTANCE — JUNCTION TO
SOLDER PAD (°C/W)
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
3
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON FlipChip White.
MAXIMUM PERFORMANCE
PARAMETER
LUXEON FLIPCHIP WHITE 05
LED Junction Temperature [1] (DC & Pulse)
DC Forward Current
[1,2]
Peak Pulsed Forward Current [1,3]
LUXEON FLIPCHIP WHITE 10
150°C
135°C
150°C
135°C
350
525
700
1050
420
600
840
1200
Storage Temperature
-40°C to 135°C
Soldering Temperature
260°C
Allowable Reflow Cycles [4]
3
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is ≥100 Hz and amplitude ≤15% of the maximum DC current are acceptable
– The average current for each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. Pulsed operation with a peak drive current equal to the stated Peak Pulsed Forward Current is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%.
4. Per JDEC J-STD-0202D MSL Classification.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a: Typical normalized power vs. wavelength for LxF2-xx70xx0000000 at specified test current, Tj=85ºC.
Figure 1b: Typical normalized power vs. wavelength for LxF2-xx80xx0000000 at specified test current.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
5
Light Output Characteristics
Figure 2a: Typical normalized light output vs. junction temperature for LUXEON FlipChip White at test current.
Figure 2b: Typical normalized light output vs. forward current for LUXEON FlipChip White 05, Tj=85°C.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
6
Figure 2c: Typical normalized light output vs. forward current for LUXEON FlipChip White 10, Tj=85°C.
Forward Current Characteristics
Figure 3a: Typical forward current vs. forward voltage for LUXEON FlipChip White 05, Tj=85ºC.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
7
Figure 3b: Typical forward current vs. forward voltage for LUXEON FlipChip White 10, Tj=85ºC.
Radiation Pattern Characteristics
Figure 4a: Typical radiation pattern for LUXEON FlipChip White at specified test current, Tj=85ºC.
Notes for Figure 4a:
1. At 0°, the radiation pattern slice is measured in the plane parallel to one of the four sides of the emitter. The 45° radiation pattern is measured 45° off axis relative to the 0° radiation
pattern slice.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
8
Figure 4b: Typical radiation pattern for LUXEON FlipChip White at specified test current, Tj=85ºC.
Notes for Figure 4b:
1. At 0°, the radiation pattern slice is measured in the plane parallel to one of the four sides of the emitter. The 45° radiation pattern is measured 45° off axis relative to the 0° radiation
pattern slice.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
9
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point and
forward voltage.
LUXEON FlipChip White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
Where:
A B C D
A
–
designates luminous flux bin (example: B=55 to 60 lumens, C=60 to 65 lumens for LUXEON FlipChip White 05)
B C –
designates color bin (example: 30, AA, AB, AC, AD, 5A, 5B, 5C or 5D for 70CRI parts)
D
designates forward voltage bin (example: Q=2.50 to 2.75V, R=2.75 to 3.00V)
–
Therefore, a LUXEON FlipChip White 05 with a lumen range of 55 to 60, color bin of 5C and a forward voltage range of 2.50 to
2.75V has the following CAT code:
B 5 C Q
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
10
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON FlipChip White emitters. Although several bins are outlined,
product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON FlipChip White.
PRODUCT
LUXEON FlipChip White 05
LUXEON FlipChip White 10
BIN
LUMINOUS FLUX (lm)
MINIMUM
MAXIMUM
8
40
45
9
45
50
A
50
55
B
55
60
C
60
65
D
65
70
E
70
75
F
75
80
8
80
90
9
90
100
A
100
110
B
110
120
C
120
130
D
130
140
E
140
150
F
150
160
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
11
Color Bin Definition
Figure 5: Color bin definition for LUXEON FlipChip White
at 70 CRI.
Figure 6: Color bin definition for LUXEON FlipChip White
at 80 CRI.
Figure 7: 3- and 5-step MacAdam ellipse illustration for Table 7.
Table 6. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON FlipChip White.
NOMINAL CCT
COLOR SPACE [1, 2, 3]
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.7°
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.2°
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.7°
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.6°
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00745
0.00319
59.1°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.7°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.2°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.7°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.6°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01234
0.00533
59.1°
Notes for Table 6 :
1. The 3-step MacAdam ellipse is segmented into two sub-bins, one above (3U) and one below (3L) the blackbody line, for products with a minimum CRI of 80. Products with a minimum CRI of 70
are only available in a single 3-step MacAdam ellipse (30).
2. The 5-step MacAdam ellipse is divided into quadrants (5A, 5B, 5C, and 5D) for all products.
3. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
12
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON FlipChip White.
FORWARD VOLTAGE (V) [1]
BIN
MINIMUM
MAXIMUM
Q
2.50
2.75
R
2.75
3.00
S
3.00
3.25
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Mechanical Dimensions
Figure 8: Mechanical dimensions for LUXEON FlipChip White 05.
Notes for Figure 8:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
13
Figure 9: Mechanical dimensions for LUXEON FlipChip White 10.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
14
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10: Visualization of the acceptable reflow temperature profile as specified in Table 10.
Table 8. Reflow profile characteristics for LUXEON FlipChip White.
PROFILE FEATURE
LEAD-FREE ASSEMBLY
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 180 seconds
Ramp-Up Rate (Tsmax to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON FlipChip White.
LEVEL
1
FLOOR LIFE
SOAK REQUIREMENTS STANDARD
TIME
CONDITIONS
TIME
CONDITIONS
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
15
Solder Pad Design
Figure 11: Recommended PCB solder pad layout for LUXEON FlipChip White 05.
Figure 12: Recommended PCB solder pad layout for LUXEON FlipChip White 10.
Notes for Figures 11 and 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
16
Packaging Information
Bin Sheet
Figure 13 shows the configuration and orientation of LUXEON FlipChip White packaged on bin sheet. The unit spacing is on
average 0.70mm for LUXEON FlipChip White 05 and 0.40mm for LUXEON FlipChip White 10.
Figure 13: Example of bin sheet label for LUXEON FlipChip White.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
17
Tape and Reel Dimensions
Figure 14: Tape dimensions for LUXEON FlipChip White 05.
Figure 15: Tape dimensions for LUXEON FlipChip White 10.
Notes for Figures 14 and 15:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
18
Figure 16: Reel dimensions for LUXEON FlipChip White.
Notes for Figure 16:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS117 LUXEON FlipChip White Product Datasheet 20151123 ©2015 Lumileds Holding B.V. All rights reserved.
19
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2015 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS117 LUXEON FlipChip White
Product Datasheet 20151123
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.