Gamewell-FCI GWRAN2-BB Remote alphanumeric annunciator Datasheet

RAN-7100
Remote Alphanumeric Annunciator
Description
The Gamewell-FCI, Remote Alphanumeric Annunciator
(RAN-7100) display is a remote annunciator. This adaptable remote display can be used for installations in the following modular systems.
• E3 Series® Expandable Emergency Evacuation System
• S3 Series Small Addressable Fire Alarm Control Panel
• 7100 Series System
It features an 80-character display which duplicates all the
information on the main display with the exception of the
menus. The 7100, E3 Series, and S3 Series control panels
can accommodate up to five remote RAN-7100 annunciators. In addition, the RAN-7100 can be surface or flushmounted in the RAN-7100 backbox and installed 3,000
feet (914.4 m) away from the main control panel. The RAN7100 is also a retrofit solution for the Gamewell Legacy
RAN-7100 annunciators. This feature offers you the option
to use the RAN-7100 to upgrade to a 7100, an E3 Series
or an S3 Series System.
The RAN-7100 contains the following function keys
• Alarm Acknowledge
• System Reset/Lamp Test
• Trouble Acknowledge
• System Drill Test
• Signal Silence
A keylock must be placed in the “ON” position to enable
the function keys with the exception of the “Trouble
Acknowledge” key which is used to silence the trouble
sounder on the RAN-7100.
The LEDs on the RAN-7100 are listed as follows:
• Alarm
• System Silenced
• Supervisory
• NAC #1 Silenced
• System Trouble
• NAC #2 Silenced
• Power Fault
Installation
The RAN-7100 can be surface or flush-mounted on a standard four-gang electrical box and installed up to 3,000 feet
(914.4 m) away from the main control panel.
Specifications
Operating Voltage:
Supervisory Current:
Alarm Current:
Absolute Maximum
Operating Temperature:
Relative Humidity:
Dimensions:
24 VDC (nominal)
.012 amp
.023 amp
RAN-7100
Features
• Listed under UL® Standard 864, 9th Edition.
• Includes an 80-character alphanumeric LCD display.
• Provides a full complement of function keys and LEDs.
• Installs in a remote location up to 3,000 feet (914.4 m)
away from the main control panel.
• Up to five annunciators can be used with the 7100, E3
Series and S3 Series panels.
• Connects as a surface or flush-mount in the RAN2-BB
backbox.
• Designed for retrofitting Gamewell RAN annunciators to
be installed in the 7100 Series, E3 Series or S3 Series
Systems.
• Offers a compact, attractive design.
Ordering Information
Part Number
RAN-7100
PK625 Key
GWRAN2-BB
32° to 120° F (0° to 49° C)
0 to 93% max., non-condensing at 90° F (32° C)
10” W x 5 1/4” H x 2 7/16” D
(25.4 W x 13.3 H x 6.9 D cm)
Description
Remote Serial LCD Display
LCD Display Key
Surface or flush backbox for RAN-7100
(sold separately)
SIGNALING
®
E3 Series is a registered trademark of Honeywell International Inc.
®
UL is a registered trademark of Underwriter’s Laboratories Inc.
S1689 7165-1703:0125
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9021-60693 Rev. E page 1 of 1
©2016 by Honeywell International Inc. All rights reserved.
Similar pages