AD ADG736BRM-REEL Cmos low voltage 2.5 î© dual spdt switch Datasheet

CMOS Low Voltage
2.5 Ω Dual SPDT Switch
ADG736
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
1.8 V to 5.5 V single supply
Automotive temperature range: −40°C to +125°C
2.5 Ω (typical) on resistance
Low on resistance flatness
−3 dB bandwidth > 200 MHz
Rail-to-rail operation
10-lead MSOP package
Fast switching times
tON: 16 ns
tOFF: 8 ns
Typical power consumption (<0.01 μW)
TTL-/CMOS-compatible
Qualified for automotive applications
ADG736
S1A 2
10
D1
6
D2
S1B 9
IN1 1
S2A 4
S2B 7
SWITCHES SHOWN
FOR A LOGIC 1 INPUT
00046-001
IN2 5
Figure 1.
APPLICATIONS
USB 1.1 signal switching circuits
Cell phones
PDAs
Battery-powered systems
Communications systems
Sample-and-hold systems
Audio signal routing
Audio and video switching
Mechanical reed relay replacement
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG736 is a monolithic device comprising two independently selectable CMOS single pole, double throw (SPDT) switches.
These switches are designed using a submicron process that
provides low power dissipation yet gives high switching speed,
low on resistance, low leakage currents, and wide input signal
bandwidth.
1.
The on resistance profile is very flat over the full analog signal
range. This ensures excellent linearity and low distortion when
switching audio signals. Fast switching speed also makes the
part suitable for video signal switching.
The ADG736 operates from a single 1.8 V to 5.5 V supply,
making it ideally suited to portable and battery-powered
instruments.
2.
3.
4.
5.
6.
7.
8.
1.8 V to 5.5 V Single-Supply Operation. The ADG736
offers high performance, including low on resistance and
fast switching times. It is fully specified and guaranteed
with 3 V and 5 V supply rails.
Very Low RON (4.5 Ω Maximum at 5 V, 8 Ω Maximum at 3 V).
At a supply voltage of 1.8 V, RON is typically 35 Ω over the
temperature range.
Low On Resistance Flatness.
−3 dB Bandwidth > 200 MHz.
Low Power Dissipation. CMOS construction ensures low
power dissipation.
Fast tON/tOFF.
Break-Before-Make Switching Action.
10-Lead MSOP Package.
Each switch conducts equally well in both directions when on, and
each has an input signal range that extends to the power supplies.
The ADG736 exhibits break-before-make switching action.
The ADG736 is available in a 10-lead MSOP package.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2012 Analog Devices, Inc. All rights reserved.
ADG736
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Pin Configuration and Function Descriptions..............................6
Applications ....................................................................................... 1
Typical Performance Characteristics ..............................................7
Functional Block Diagram .............................................................. 1
Test Circuits........................................................................................9
General Description ......................................................................... 1
Terminology .................................................................................... 10
Product Highlights ........................................................................... 1
Applications Information .............................................................. 11
Revision History ............................................................................... 2
Outline Dimensions ....................................................................... 12
Specifications..................................................................................... 3
Ordering Guide .......................................................................... 12
Absolute Maximum Ratings ............................................................ 5
Automotive Products ................................................................. 12
ESD Caution .................................................................................. 5
REVISION HISTORY
2/12—Rev. C to Rev. D
Added Automotive Information (Throughout) ........................... 1
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 12
12/07—Rev. B to Rev. C
Updated Temperature Range (Throughout) ................................. 1
Changes to Features Section............................................................ 1
Changes to Figure 4 and Figure 5 ................................................... 7
Changes to Ordering Guide .......................................................... 12
1/07—Rev. A to Rev. B
Updated Format .................................................................. Universal
Changes to Leakage Currents ......................................................... 3
Changes to Leakage Currents ......................................................... 4
Changes to Ordering Guide .......................................................... 12
Updated Outline Dimensions ....................................................... 12
11/03—Rev. 0 to Rev. A
Renumbered Figures and TPCs ........................................ Universal
Change to Title .................................................................................. 1
Changes to Applications .................................................................. 1
Changes to Absolute Maximum Ratings ....................................... 4
Changes to Ordering Guide ............................................................ 4
Changes to Test Circuit 3 ................................................................. 7
Changes to Outline Dimensions..................................................... 8
Rev. D | Page 2 of 12
Data Sheet
ADG736
SPECIFICATIONS
VDD = 5 V ± 10%, GND = 0 V. All specifications −40°C to +125°C, unless otherwise noted.
Table 1.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
25°C
0 V to VDD
2.5
4
On Resistance Match Between Channels (∆RON)
On Resistance Flatness (RFLAT (ON))
LEAKAGE CURRENTS
Source Off Leakage IS (Off )
Channel On Leakage ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
tOFF
Break-Before-Make Time Delay, tD
B Version
−40°C to
−40°C to
+85°C
+125°C
4.5
7
0.1
Unit
V
Ω typ
0.4
0.4
1.2
1.5
±0.01
1
nA typ
±0.01
5
nA typ
2.4
0.8
2.4
0.8
± 0.1
± 0.1
V min
V max
µA typ
µA max
0.005
12
VS = 0 V to VDD, IDS = −10 mA
VS = 0 V to VDD, IDS = −10 mA
VDD = 5.5 V
VS = 4.5 V/1 V, VD = 1 V/4.5 V;
see Figure 11
VS = VD = 1 V or 4.5 V; see Figure 12
VIN = VINL or VINH
ns typ
RL = 300 Ω, CL = 35 pF
VS = 3 V; see Figure 13
RL = 300 Ω, CL = 35 pF
VS = 3 V; see Figure 13
16
16
8
8
ns max
ns typ
ns max
1
1
ns typ
ns min
RL = 300 Ω, CL = 35 pF
VS1 = VS2 = 3 V; see Figure 14
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 15
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 16
RL = 50 Ω, CL = 5 pF; see Figure 17
5
7
Off Isolation
–62
–82
dB typ
dB typ
Channel-to-Channel Crosstalk
–62
–82
dB typ
dB typ
Bandwidth (–3 dB)
200
MHz typ
CS (Off )
CD, CS (On)
POWER REQUIREMENTS
IDD
9
32
pF typ
pF typ
0.001
µA typ
µA max
1.0
1
VS = 0 V to VDD, IDS = −10 mA;
see Figure 10
Ω max
Ω typ
Ω max
Ω typ
Ω max
0.5
Test Conditions/Comments
1.0
Guaranteed by design; not subject to production test.
Rev. D | Page 3 of 12
VDD = 5.5 V
Digital inputs = 0 V or 5 V
ADG736
Data Sheet
VDD = 3 V ± 10%, GND = 0 V. All specifications −40°C to +125°C, unless otherwise noted.
Table 2.
B Version
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Match Between Channels (∆RON)
25°C
−40°C to
+85°C
5
5.5
−40°C to
+125°C
0 V to VDD
8
12
0.4
2.5
0.4
2.5
0.1
On Resistance Flatness (RFLAT (ON))
Unit
V
Ω typ
Test Conditions/Comments
Ω max
VS = 0 V to VDD, IDS = −10 mA;
see Figure 10
See Figure 10
Ω typ
VS = 0 V to VDD, IDS = −10 mA
Ω max
Ω typ
VS = 0 V to VDD, IDS = −10 mA
LEAKAGE CURRENTS
VDD = 3.3 V
Source Off Leakage IS (Off )
±0.01
1
nA typ
Channel On Leakage ID, IS (On)
±0.01
5
nA typ
VS = 3 V/1 V, VD = 1 V/3 V;
see Figure 11
VS = VD = 1 V or 3 V; see Figure 12
2.4
0.8
V min
V max
µA typ
VIN = VINL or VINH
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
2.0
0.4
0.005
±0.1
± 0.1
20
20
10
10
1
1
ns typ
RL = 300 Ω, CL = 35 pF
ns max
VS = 2 V; see Figure 13
ns typ
RL = 300 Ω, CL = 35 pF
ns max
VS = 2 V; see Figure 13
ns typ
RL = 300 Ω, CL = 35 pF
ns min
VS1 = VS2 = 2 V; see Figure 14
−62
dB typ
RL = 50 Ω, CL = 5 pF, f = 10 MHz
−82
dB typ
−62
dB typ
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 15
RL = 50 Ω, CL = 5 pF, f = 10 MHz
−82
dB typ
Bandwidth (−3 dB)
200
MHz typ
CS (Off )
CD, CS (On)
POWER REQUIREMENTS
9
32
pF typ
pF typ
tOFF
Break-Before-Make Time Delay, tD
Off Isolation
Channel-to-Channel Crosstalk
IDD
14
µA max
6
7
VDD = 3.3 V
0.001
1.0
1
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 16
RL = 50 Ω, CL = 5 pF; see Figure 17
1.0
Guaranteed by design; not subject to production test.
Rev. D | Page 4 of 12
µA typ
µA max
Digital inputs = 0 V or 3 V
Data Sheet
ADG736
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to GND
Analog, Digital Inputs 1
Continuous Current, S or D
Peak Current, S or D
Operating Temperature Range
Automotive
Storage Temperature Range
Junction Temperature
MSOP Package, Power Dissipation
θJA Thermal Impedance
Lead Temperature (Soldering,
10 sec)
IR Reflow (Peak Temperature,
<20 sec)
Lead-Free Reflow Soldering
Peak Temperature
Time at Peak Temperature
ESD
1
Rating
−0.3 V to +6 V
−0.3 V to VDD + 0.3 V or 30 mA,
whichever occurs first
30 mA
100 mA (Pulsed at 1 ms, 10%
duty cycle maximum)
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
−40°C to +125°C
−65°C to +150°C
150°C
315 mW
205°C/W
300°C
235°C
260(+0/−5)°C
10 sec to 40 sec
2 kV
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Rev. D | Page 5 of 12
ADG736
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
IN1 1
S1A 2
ADG736
10
D1
9
S1B
8 VDD
TOP VIEW
S2A 4 (Not to Scale) 7 S2B
IN2 5
6
D2
00046-002
GND 3
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
Mnemonic
IN1
S1A
GND
S2A
IN2
D2
S2B
VDD
S1B
D1
Description
Logic Control Input.
Source Terminal. May be an input or output.
Ground (0 V) Reference.
Source Terminal. May be an input or output.
Logic Control Input.
Drain Terminal. May be an input or output.
Source Terminal. May be an input or output.
Most Positive Power Supply Potential.
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Table 5. Truth Table
Logic
0
1
Switch A
Off
On
Switch B
On
Off
Rev. D | Page 6 of 12
Data Sheet
ADG736
TYPICAL PERFORMANCE CHARACTERISTICS
6.0
6.0
TA = 25°C
5.5
5.0
5.0
4.5
4.5
4.0
4.0
VDD = 3.0V
3.5
RON (Ω)
VDD = 4.5V
3.0
2.5
2.0
3.5
+125°C
+85°C
3.0
+25°C
2.5
2.0
1.5
1.5
VDD = 5.0V
1.0
00046-003
1.0
0.5
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
–40°C
0.5
0
5.0
0
0.5
VD OR VS (DRAIN OR SOURCE VOLTAGE) (V)
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Figure 5. On Resistance as a Function of VD or VS for Different Temperatures
VDD = 5 V
10m
VDD = 3V
5.5
+125°C
5.0
1.0
VD OR VS (DRAIN OR SOURCE VOLTAGE) (V)
Figure 3. On Resistance as a Function of VD or VS Single Supplies
6.0
00046-005
RON (Ω)
VDD = 5V
5.5
VDD = 2.7V
1m
VDD = 5V
TA = 25°C
+85°C
4.5
100m
+25°C
ISUPPLY (A)
RON (Ω)
4.0
3.5
3.0
2.5
10m
1m
2.0
–40°C
100n
1.5
1.0
0
0
0.5
1.0
1.5
2.0
2.5
1n
100
3.0
VD OR VS (DRAIN OR SOURCE VOLTAGE) (V)
Figure 4. On Resistance as a Function of VD or VS for Different Temperatures
VDD = 3 V
Rev. D | Page 7 of 12
00046-006
10n
00046-004
0.5
1k
10k
100k
FREQUENCY (Hz)
1M
Figure 6. Supply Current vs. Input Switching Frequency
10M
ADG736
Data Sheet
0
–30
VDD = 5V, 3V
TA = 25°C
–50
VDD = 5V
TA = 25°C
–60
–2
CROSSTALK (dB)
ON RESPONSE (dB)
–40
–4
–70
–80
–90
–100
100k
1M
10M
FREQUENCY (Hz)
–120
–130
10k
100M
Figure 7. Bandwidth
VDD = 5V, 3V
TA = 25°C
–60
–70
–80
–90
–100
–110
00046-008
OFF ISOLATION (dB)
–50
–120
–130
10k
100k
1M
10M
FREQUENCY (Hz)
100k
1M
10M
FREQUENCY (Hz)
Figure 9. Crosstalk vs. Frequency
–30
–40
00046-009
–8
10k
00046-007
–110
100M
Figure 8. Off Isolation vs. Frequency
Rev. D | Page 8 of 12
100M
Data Sheet
ADG736
TEST CIRCUITS
IDS
V1
IS (OFF)
S
A
RON = V1/IDS
ID (ON)
VS
VD
Figure 10. On Resistance
S
NC
D
A
VD
Figure 12. On Leakage
Figure 11. Off Leakage
VDD
0.1F
VDD
VOUT
D
S
VS
CL
35pF
RL
IN
50%
VIN
300
50%
90%
90%
GND
tON
tOFF
00046-014
VOUT
Figure 13. Switching Times
VDD
0.1F
VIN
VOUT
300
50%
VOUT
CL
35pF
RL
50%
90%
0V
tD
GND
tD
00046-015
D
SB
VIN
50%
VS
SA
VS
50%
0V
VDD
Figure 14. Break-Before-Make Time Delay, tD
VDD
0.1F
VDD
VDD
0.1F
VDD
D
S
D
50
VIN1
SA
SB
S
VOUT
D
VS
VIN2
IN
GND
GND
00046-016
RL
50
CHANNEL-TO-CHANNEL CROSSTALK = 20  LOG |VS/VOUT|
Figure 16. Channel-to-Channel Crosstalk
Figure 15. Off Isolation
VDD
0.1F
VDD
S
RL
50
IN
VS
VOUT
D
VIN
GND
Figure 17. Bandwidth
Rev. D | Page 9 of 12
00046-018
VS
NC
VIN
VOUT
00046-017
RL
50
00046-013
VS
D
00046-012
D
00046-011
S
ADG736
Data Sheet
TERMINOLOGY
tOFF
Delay between applying the digital control input and the output
switching off. See Figure 13.
RON
Ohmic resistance between Terminal D and Terminal S.
∆RON
On resistance match between any two channels; that is, RON
maximum − RON minimum.
RFLAT (ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured over the specified
analog signal range.
IS (Off)
Source leakage current with the switch off.
tD
Off time or on time measured between the 90% points of both
switches, when switching from one address state to another. See
Figure 14.
Crosstalk
A measure of unwanted signal that is coupled from one channel
to another as a result of parasitic capacitance.
Off Isolation
A measure of unwanted signal coupling through an off switch.
ID, IS (On)
Channel leakage current with the switch on.
Bandwidth
The frequency at which the output is attenuated by −3 dB.
VD (VS)
Analog voltage on Terminal D and Terminal S.
On Response
The frequency response of the on switch.
CS (Off)
Off switch source capacitance.
CD, CS (On)
On switch capacitance.
tON
Delay between applying the digital control input and the output
switching on. See Figure 13.
On Loss
The voltage drop across the on switch, seen on the on response
vs. frequency plot (see Figure 7) as how many decibels (dB) the
signal is away from 0 dB at very low frequencies.
Rev. D | Page 10 of 12
Data Sheet
ADG736
APPLICATIONS INFORMATION
VDD
V+
CH1
S1A
CH2
S1B
A=2
75
VOUT
250
75
IN1
ADG736
250
Figure 18. Using the ADG736 to Select Between Two Video Signals
Rev. D | Page 11 of 12
RL
75
00046-010
D
75
ADG736
Data Sheet
OUTLINE DIMENSIONS
3.10
3.00
2.90
10
3.10
3.00
2.90
5.15
4.90
4.65
6
1
5
PIN 1
IDENTIFIER
0.50 BSC
0.95
0.85
0.75
15° MAX
1.10 MAX
0.30
0.15
6°
0°
0.23
0.13
0.70
0.55
0.40
COMPLIANT TO JEDEC STANDARDS MO-187-BA
091709-A
0.15
0.05
COPLANARITY
0.10
Figure 19. 10-Lead Mini Small Outline Package [MSOP]
(RM-10)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
ADG736BRM
ADG736BRM-REEL
ADG736BRM-REEL7
ADG736BRMZ
ADG736BRMZ-REEL
ADG736BRMZ-REEL7
ADW54010Z-0REEL
1
2
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
10-Lead Mini Small Outline Package (MSOP)
Package Option
RM-10
RM-10
RM-10
RM-10
RM-10
RM-10
RM-10
Branding
SAB
SAB
SAB
SAB#
SAB#
SAB#
SAB#
Z = RoHS Compliant Part, # denotes RoHS compliant part may be top or bottom marked.
W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADW54010Z model is available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
©2003–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00046-0-2/12(D)
Rev. D | Page 12 of 12
Similar pages