Wall DCHBW75-48S24 Up to 76.8 watts dc/dc power converter single output Datasheet

DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
Standard
Terminal Block
with EMC Filter
Terminal Block
Size: 2.4in x 2.28in x 0.5in (61mm x 57.9mm x 12.7in)
OPTIONS
•
•
•
•
•
•
FEATURES
Pin Length
Heatsinks
Thru-Hole Inserts
Negative Logic Remote On/Off
Terminal Block
Terminal Block with EMC Filter
•
•
•
•
•
•
•
•
Soft-Start
•
RoHS II and REACH Compliant
•
4:1 Ultra Wide Input Voltage Ranges
•
Up to 76.8 Watts of Output Power
•
Single Outputs Ranging from 3.3VDC to 48VDC •
Output Current up to 20A
•
Under Voltage Lockout
•
UL60950-1, EN60950-1, IEC60950-1,
•
EN45545-2 and EN50155 Safety Approvals
Six-Sided Shielding
High Efficiency up to 91%
No Minimum Load Requirements
Adjustable Output Voltage
Industry Standard Half-Brick Footprint
Remote On/Off Control
Threaded Inserts and Thru-Hole Inserts Available
Short Circuit, Over Voltage, Over Load, and Over
Temperature Protection
APPLICATIONS
DESCRIPTION
•
•
•
•
•
•
The DCHBW75 series of DC/DC power converters provides up to 76.8 Watts of output power in an industry
standard half-brick package and footprint. This series consists of single output models ranging from 3.3VDC
to 48VDC with 4:1 ultra wide input voltage ranges of 9~36VDC, 18~75VDC and 43~160VDC. Some
features include high efficiency up to 91%, adjustable output voltage, positive remote on/off control, and
under voltage lockout. These converters also have short circuit, over voltage, over load, and over
temperature protection. The DCHBW75 series is RoHS compliant and has UL60950-1, EN60950-1,
IEC60950-1, EN45545-2 and EN50155 safety approvals. Several different options are available for this
series including negative remote on/off, terminal block, pin length, heatsinks, and thru-hole inserts. Please
call factory for more details.
Railway Systems
Wireless Networks
Telecom/Datacom
Industry Control Systems
Semiconductor Equipment
Distributed Power
Architectures
• Military Applications
2/6/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
MODEL SELECTION TABLE
Input Voltage
Range
Model Number
DCHBW75-24S3.3
DCHBW75-24S05
DCHBW75-24S12
DCHBW75-24S15
DCHBW75-24S24
DCHBW75-24S28
DCHBW75-24S48
DCHBW75-48S3.3
DCHBW75-48S05
DCHBW75-48S12
DCHBW75-48S15
DCHBW75-48S24
DCHBW75-48S28
DCHBW75-48S48
DCHBW75-110S3.3
DCHBW75-110S05
DCHBW75-110S12
DCHBW75-110S15
DCHBW75-110S24
DCHBW75-110S28
DCHBW75-110S48
24VDC
(9~36VDC)
48VDC
(18~75VDC)
110VDC
(43~160VDC)
Output
Voltage
3.3VDC
5VDC
12VDC
15VDC
24VDC
28VDC
48VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
28VDC
48VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
28VDC
48VDC
Output Current
No Load
Ripple & Noise
Input Current(1)
Min Load Max Load
0mA
20A
75mVp-p
85mA
0mA
15A
75mVp-p
120mA
0mA
6.3A
100mVp-p
185mA
0mA
5A
100mVp-p
185mA
0mA
3.2A
200mVp-p
85mA
0mA
2.7A
200mVp-p
85mA
0mA
1.6A
300mVp-p
85mA
0mA
20A
75mVp-p
60mA
0mA
15A
75mVp-p
60mA
0mA
6.3A
100mVp-p
90mA
0mA
5A
100mVp-p
50mA
0mA
3.2A
200mVp-p
50mA
0mA
2.7A
200mVp-p
50mA
0mA
1.6A
300mVp-p
50mA
0mA
20A
75mVp-p
10mA
0mA
15A
75mVp-p
10mA
0mA
6.3A
100mVp-p
10mA
0mA
5A
100mVp-p
10mA
0mA
3.2A
200mVp-p
10mA
0mA
2.7A
200mVp-p
10mA
0mA
1.6A
300mVp-p
10mA
Output
Power
66W
75W
75.6W
75W
76.8W
75.6W
76.8W
66W
75W
75.6W
75W
76.8W
75.6W
76.8W
66W
75W
75.6W
75W
76.8W
75.6W
76.8W
Maximum Capacitive
Efficiency(3)
Load(2)
60600µF
30000µF
5250µF
3330µF
1330µF
960µF
330µF
60600µF
30000µF
5250µF
3330µF
1330µF
960µF
330µF
60600µF
30000µF
5250µF
3330µF
1330µF
960µF
330µF
87%
88%
88%
88%
87%
87%
87%
88%
90%
90%
89%
88%
88%
87%
89%
91%
91%
91%
90%
90%
90%
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
9
18
43
24
48
110
36
75
160
9
18
43
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Start-Up Voltage
Shutdown Voltage
Input Surge Voltage (1 sec max.)
Input Current
Input Filter(4)
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Voltage Adjustability(5)
Remote Sense(6)
Output Power
Output Current
Minimum Load
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
110VDC Input Models
Start-Up Time
Others
Temperature Coefficient
2/6/2018
24VDC Nominal Input Models
48VDC Nominal Input Models
110VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
110VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
110VDC Nominal Input Models
24VDC Nominal Input Models
48VDC Nominal Input Models
110VDC Nominal Input Models
No Load
Low Line to High Line at Full Load
No Load to Full Load
7.5
16
36
50
100
185
See Table
Pi Type
-1.0
-0.1
-0.1
-20
See Table
+1.0
+0.1
+0.1
+10
10
See Table
See Table
0
Minimum Input and Constant Resistive Load
4.7µF/50V X7R MLCC
3.3V and 5V Models
4.7µF/50V X7R MLCC
12V and 15V Models
4.7µF/50V X7R MLCC
24V and 28V Models
2.2µF/100V X7R MLCC
48V Models
25% Load Step Change
Nominal Input and Constant Resistive Load
Power Up or Remote On/Off
-0.02
VDC
VDC
VDC
VDC
%
%
%
%
%Vo
%
See Table
75
100
100
125
200
250
300
350
200
250
60
25
+0.02
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
mVp-p
µs
Ms
%/ºC
Page 2 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF CONTROL(7)
Positive Logic (Standard)
Negative Logic (Optional)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
Short Circuit Protection
Over Load Protection
Over Voltage Protection
Over Temperature Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
Storage Temperature
Thermal Impedance(8)
Relative Humidity
Thermal Shock
Shock
Vibration
MTBF
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
-0.5
110Vin (Nominal)
% of lout rated; Hiccup mode
Others
% of Vout (nominal); Hiccup Mode
Base-Plate
Standard
Terminal Block Type
Standard
With 0.24” Heatsink
With 0.45” Heatsink
Nominal Input Voltage and Full Load
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
1 minute (basic insulation)
500VDC
Standard
Terminal Block (“T” Suffix)
Dimensions (L x W x H)
Terminal Block with EMC Filter (“TF” suffix)
Terminal Block with EMC Filter, connected to PE (“TF1” suffix)
Case Material
Base Material
Potting Material
Shielding
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMI(9)
ESD
Radiated Immunity
Fast Transient(10)
Surge(10)
Conducted Immunity
Power Frequency Magnetic Field
2/6/2018
270
3000
1500
2250
24VDC and 48VDc Nominal Input Voltage Models
110VDC Nominal Input Voltage Models
24VDC and 48VDC Nominal Input Voltage Models
24VDC and 48VDC Nominal Input Models
ºC
ºC
ºC/W
95
%RH
MIL-STD-810F
EN61373, MIL-STD-810F
EN61373, MIL-STD-810F
336,200 hours
See Table
300
330
kHz
VAC
VDC
1600
1
2500
Standard
Terminal Block (“T” Suffix)
Terminal Block with EMC Filter (“TF” suffix)
Terminal Block with EMC Filter, connected to PE (“TF1” suffix)
Weight
+105
+125
+105
6.7
5.4
4.7
MIL-HDBK-217F, Full Load
Isolation Voltage
Others
-40
-55
-40
Input to Output
Input (Output) to Case
Input to Output
Input (Output) to Case
mA
mA
Continuous, Automatic Recovery
150
%
110
140
115
130
%
+115
ºC
5
110VDC Input Models 1 minute (reinforced insulation)
Short or 0~1.2VDC
Open or 3~12VDC
Open or 3~12VDC
Short or 0~1.2VDC
1
3
GΩ
pF
3.42oz (97g)
7.05oz (200g)
9.88oz (280g)
10.12oz (287g)
2.4in x 2.28in x 0.5in
(61mm x 57.9mm x 12.7mm)
3.35in x 2.4in x 1.17in
(85mm x 61mm x 28mm)
3.35in x 2.4in x 1.54in
(85mm x 61mm x 32.3mm)
3.35in x 2.40in x 1.59in
(85.0mm x 61.0mm x 40.5mm)
Metal
Aluminum Base-Plate with Plastic Case
FR4 PCB
Silicone (UL94 V-0)
Six-Sided
UL60950-1, EN60905-1, IEC60950-1, EN50155, EN45545-2
EN55011, EN55022
Air ±8KV
EN61000-4-2
Contact ±6KV
EN61000-4-3
20 V/m
EN61000-4-4
±2KV
EN55024
±2KV
EN61000-4-5
EN50155
±2KV
EN61000-4-6
10Vr.m.s
EN61000-4-8
100A/m continuous; 1000A/m 1 second
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Class A, Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Page 3 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Typical Value at Nominal Input Voltage and No Load.
Test by minimum input and constant resistive load.
Typical Value at Nominal Input Voltage and Full Load.
Input source impedance: The power module will operate as specifications without external components, assuming that the source voltage has a
very low impedance and reasonable input voltage regulation. Highly inductive source impedances can affect the stability of the power module. An
external input capacitor is recommended for 24VDC nominal input models. We suggest 4.7µF/50V X7R MLCC or Nippon chemi-con KY series,
68µF/100V, ESR 110mΩ or better capacitor. For terminal block versions, the capacitor is included as standard and an external capacitor is not
necessary.
Output voltage is adjustable for 10% trim up or -20% down of nominal output voltage by connecting a single resistor between TRIM and +SENSE
pins for trim up or between TRIM and –SENSE pins for trim down. To calculate the value of the resistor RU and RD for a particular output voltage
see page 5/6.
Maximum output deviation is +10% inclusive of remote sense and trim. If remote sense is not being used, the +SENSE should be connected to its
corresponding +OUTPUT and likewise the –SENSE should be connected to its corresponding –OUTPUT.
The CTRL pin voltage is referenced to –INPUT. To order negative logic remote on/off control add the suffix “R” to the model number.
1. The thermal test conditions for vertical direction are by natural convection (20LFM)
2. Heat sink is optional. See the “Product Options” table for suffix options.
The standard module meets EMI Class A or Class B with external components.
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. For 24 & 48VDC nominal input models, we
recommend connecting one aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V, ESR 48mΩ) in parallel. For 110VDc
nominal input models, we recommend connecting three aluminum electrolytic capacitors (Ruby-con BXF series, 100µF/250V) in parallel.
CASE GROUNDING: EMI can be reduced when you connect the four screw bolts to the shield plane.
This series comes with several different options: Negative remote on/off control, heatsinks, pin length, thru-hole inserts, and terminal blocks. See
the “Product Options” table on page 6 for more ordering information.
CAUTION: This power converter is not internally fused. An input line fuse must always be used.
DERATING CURVES
DCHBW75-48S05 Derating Curve
DCHBW75-48S05 Derating Curve
With 0.24” Height Heatsink (See Note 8)
DCHBW75-48S05 Derating Curve
With 0.45” Height Heatsink (See Note 8)
2/6/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
EFFICIENCY GRAPHS
DCHBW75-48S05 Efficiency vs. Input Voltage
DCHBW75-48S05 Efficiency vs. Output Load
MECHANICAL DRAWINGS
METAL CASE (24VDC & 48VDC Nominal Input Models)
PIN
1
2
3
4
5
6
7
8
9
PIN CONNECTION
DEFINE DIAMETER
-Vin
0.04 Inch
Case
0.04 Inch
Ctrl
0.04 Inch
+Vin
0.04 Inch
-Vout
0.08 Inch
-Sense
0.04 Inch
Trim
0.04 Inch
+Sense
0.04 Inch
+Vout
0.08 Inch
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by
using the method shown below
Notes:
1.
2.
3.
4.
5.
6.
2/6/2018
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Pin Pitch Tolerance ±0.01 (0.25)
Pin Dimension Tolerance ±0.004 (0.1)
Mounting Screws should always be used
The screw locked torque: MAX 5.0kgf-cm(049N-m)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
PLASTIC CASE (110VDC Nominal Input Models)
PIN
1
2
3
4
5
6
7
8
9
PIN CONNECTION
DEFINE DIAMETER
-Vin
0.04 Inch
Case
0.04 Inch
Ctrl
0.04 Inch
+Vin
0.04 Inch
-Vout
0.08 Inch
-Sense
0.04 Inch
Trim
0.04 Inch
+Sense
0.04 Inch
+Vout
0.08 Inch
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by
using the method shown below
Notes:
1.
2.
3.
4.
5.
6.
Product Options
Negative Remote ON/OFF Logic
Positive Remote ON/OFF Logic
Thru-Hole Inserts (No Thread)(1)
Notes:
1.
2.
3.
2/6/2018
0.200” pin length
0.145” pin length
0.200” pin length
0.145” pin length
00.126 thru-hold (no
thread) inserts
Suffix
R
RL
None
S
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Pin Pitch Tolerance ±0.01 (0.25)
Pin Dimension Tolerance ±0.004 (0.1)
Mounting screws should always be used.
The screw locked torque: MAX 3.5kgf-cm(0.34N-m)
Heatsink(1)
TH
Terminal
Block(2) (3)
Product Options
H = 0.45” Vertical
H = 0.24” Horizontal
H = 0.24” Vertical
H = 0.45” Horizontal
Suffix
H
H1
H2
H3
Wall Mounted
T
Wall Mounted with EMC Filter
Wall mounted with EMC Filter
can be connected to PE
TF
TF1
Models with thru-hole inserts cannot be equipped with heatsink.
Terminal block models have 0.200” pin lengths. 0.145” pin lengths are not available for terminal block models
EMI filter meets EN55011, EN55022 Class A/
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 6 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
HEATSINK OPTIONS
Vertical Fin Orientation, Suffixes: “HS”, “HS2”
Horizontal Fin Orientation, Suffixes: “H1”, “H3”
Unit: Inches (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
Unit: Inches (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
Heatsink Options
H= 0.24 Inches (“H2” Suffix)
H= 0.45 Inches (“H” Suffix)
Heatsink Options
H= 0.24” (“H1” Suffix)
H= 0.45” (“H3” Suffix)
TERMINAL BLOCK OPTIONS
Wall Mounted without EMC Filter (Suffix “T”)
TERMINAL CONNECTION: -T, -TF
NO.
DEFINE
1
-Vin
2
Case
3
Ctrl
4
+Vin
5
-Vout
6
-Sense
7
Trim
8
+Sense
9
+Vout
Wall Mounted with EMC Filter (Suffix “TF”)
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using
the method shown below.
Wall Mounted with EMC Filter can be connected
to PE (Suffix “TF1”)
TERMINAL CONNECTION: -TF1
NO.
DEFINE
1
-Vin
2
NC
3
Ctrl
4
+Vin
5
-Vout
6
-Sense
7
Trim
8
+Sense
9
+Vout
Notes:
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Screw 1 locked torque: MAX 11.2kgf-cm/ 1.10N-m
4. Screw 2 locked torque: MAX 5.2kgf-cm/ 0.51N-m
5. Screw 3.4 locked torque: MAX 12.0kgf-cm/ 1.18N-m
2/6/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 7 of 9
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
Rev G
OUTPUT VOLTAGE ADJUSTMENT
Output is adjustable for 10% trim up or -20% trim down of nominal output voltage by connecting an external resistor between the TRIM
pin and either the +SENSE or –SENSE pins. With an external resistor between the TRIM and –SENSE pin, the output voltage set
decreases. With an external between the TRIM and –SENSE pin, the output voltage set point increases. Maximum output deviation is
+10% inclusive of remote sense. The value of the external resistor can be obtained by the equations below. The external TRIM resistor
needs to be at least 1/8W resistor.
TRIM UP
TRIM DOWN
MODEL NUMBER SETUP
DCHBW
75
Series Name
Output Power
75: 75 Watts
-
48
S
05
Input Voltage
Output Quantity
Output Voltage
24: 9~36VDC
S: Single
3.3: 3.3VDC
48: 18~75VDC
05: 5VDC
110: 43~160VDC
12: 12VDC
15: 15VDC
24: 24VDC
28: 28VDC
48: 48VDC
R
TH
H
TF
Remote On/Off & Pin Length
Thru-Hole Inserts(1)
Heatsink (1)
Terminal Block (2)
None: Positive Logic, 0.200” pin length
S: Positive Logic, 0.145” pin length
None: Threaded Inserts
TH: Ø0.126 thru-hole inserts
R: Negative Logic, 0.200” pin length
RL: Negative Logic, 0.145” pin length
(1)
None: No Heatsink
0.45” Vertical 7GH:
0021A-F
0.24” Horizontal
H1:
7G-0022A-F
0.24” Vertical
H2:
7G0023A-F
0.45” Horizontal
H3:
7G-0024A-F
None: No Terminal Block
T: Wall Mounted
TF: Wall Mounted with EMC Filter (3)
T1:
Wall Munted with EMC filter can be
connected to PE (3)
NOTES
1. Models with thru-hole inserts cannot be equipped with a heatsink.
2. Only 0.200” pin length is available with terminal block options.
3. EMI Filter meets EN55011, EN55022 Class A
2/6/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 8 of 9
Rev G
DCHBW75 SERIES
Up to 76.8 Watts
DC/DC Power Converter
Single Outputs
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
2/6/2018
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 9 of 9
Similar pages