Online data sheet FLG4-20018011 FLG SWITCHING AUTOMATION LIGHT GRIDS FLG4-20018011 | FLG SWITCHING AUTOMATION LIGHT GRIDS A B C D E F Ordering information Type Part no. FLG4-20018011 6049136 Other models and accessories www.sick.de/FLG Illustration may differ Detailed technical data Features H I J K L M N O P Q R S T Version Close Technology Sender/receiver Minimum detectable object (MDO) Dynamic: 4 mm Static: 6 mm Beam separation 4 mm Output function Light/dark switching adjustable by means of rotary switch Performance Detection area (W x H) 180 mm x 200 mm Response time < 0.1 ms Interfaces Switching output PNP/NPN (Q and /Q) Connection type M12, 4-pin male connector Mechanics/electronics Wave length 880 nm Supply voltage Vs DC 18 V ... 30 V 1) Ripple < 10 % Output current Imax. ≤ 100 mA Off delay 0 s ... 5 s 2) Initialization time 0.3 s Dimensions (W x H x D) 242 mm x 230 mm x 25 mm Housing material Aluminum, painted Indication LED Enclosure rating IP 65 1) 2) 2 Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A. Adjustable. AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10 Subject to change without notice FLG4-20018011 | FLG SWITCHING AUTOMATION LIGHT GRIDS Circuit protection UV connections, reverse polarity protected, Output Q short-circuit protected, Interference pulse suppression Weight ≥ 1 kg Switching frequency ≤ 5,000 Hz 1) 2) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A. Adjustable. Ambient data Protection class III EMC EN 60947-5-2 Ambient temperature Operation: 0 °C ... +60 °C 1) Storage: –20 °C ... +80 °C Ambient light immunity Sunlight: 10,000 lx Vibration resistance EN 60068-2-6 Shock load EN 60068-2-27 1) In static mode: constant temperature around teaching point will be assumed. Dimensional drawing (Dimensions in mm (inch)) FLGx-200xxx1x 50 4 x Ø 5 (0.20) S a M12 22 R (1.97) a1 a 37 (1.46) (0.87) 62 (2.44) 200 (7.87) 222.5 (8.76) 230 (9.06) 10.2 (0.40) S T 25 25 (0.98) (0.98) a1 FLGx-200120xx 182 (7.17) 120 (4.72) FLGx-200180xx 242 (9.53) 180 (7.09) FLGx-200250xx 312 (12.28) 250 (9.84) Adjustments NO 1 Stat.N O NC Dyn. N C Indication LED 2 ① Yellow LED: status output ② Red LED: error or button lock active (blinking) 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 3 FLG4-20018011 | FLG SWITCHING AUTOMATION LIGHT GRIDS A B C D E F Connection type and diagram M12, 4-pin male connector brn 1 wht 2 blu 3 blk 4 L+ nc M QPNP/NPN / Q̄PNP/NPN Concept of operation Setting key lock S NO 1 Dyn. N C T Stat.N O NC Unlocking: 1 To unlock the potentiometers, turn the mode button on the “Stat. NO” position. 2 Turn in less than 4 seconds, on the “Dyn. NO” position. S NO 2 Dyn.N C T 4 Stat.N O NC H I J K L M N O P Q R S T Locking: After the last setting, the frame waits 15 minutes then locks the potentiometer. When the potentiometers are locked, the red LED flashes every time you turn any button. The potentiometers are then unlocked and the settings are updated with the current position of the potentiometers. <4s Notice: If the mode button is already in the “Stat. NO” position, change mode previously and then apply the standard unlocking procedure. AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-03-09 17:40:10 Subject to change without notice FLG4-20018011 | FLG SWITCHING AUTOMATION LIGHT GRIDS 8.8 37.3 (0.35) (1.49) 4 1 2 24.3 (0.96) 29.9 (1.18) 41.2 (1.62) Diagramm 3 b Dimensions in mm (inch) b b1 1 FLG2-xxx120xx 151.4 (5.96) 73.9 (2.91) 2 FLG2-xxx180xx 140.2 (5.52) 133.9 (5.27) 3 FLG2-xxx250xx 117.6 (4.63) 203.9 (8.03) b1 All dimensions in mm (inch) ④ Side is missing in open version Recommended accessories Other models and accessories www.sick.de/FLG Brief description Type Part no. DOL-1204-G05M 6009866 Plug connectors and cables Head A: female connector, M12, 4-pin, straight Head B: cable Cable: PVC, unshielded, 5 m 2016-03-09 17:40:10 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 5 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com