ETC2 LED40W-114-HL-X-HV Fixed output and dimmable switch mode led driver Datasheet

LED-40W-HL-HV Series–
Hazardous Location, High Voltage Input Drivers
Fixed Output and Dimmable Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
347-480 Vac Nom. (312-528 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ >60% load 347V, >80% load 480V
Inrush Current:
<30.0 Amps max @ 480Vac, full load, cold start 25ºC
Input Current:
0.14 Amps typical @ 347Vac, 60 Hz, full load
Maximum Power:
40W
Current Accuracy:
± 3% Over input line variation
Load Regulation:
± 4%
THD:
<
_ 20% @ any load, 347V/480V
Leakage Current:
600 µA Typical
Hold Up Time:
Half Cycle
Output Protection:
Over-Voltage, Over-Current, Short Circuit (Auto Recovery)
• Total Power: 40 Watts
• Input Voltage: 347-480 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL Type HL, with V5A Case and
internal thermal protection
• Rated for Hazardous Locations
Environmental Specifications
Maximum Case Temp.
90°C
Minimum Starting Temp:
-30ºC
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Constant Current - Product Specifications
Output Current Output Voltage Max Output
Typical
(mA ±5%)
Range (Vdc)
Power (W) Efficiency
Model Number
LED40W-130-C0300-HL-XY-HV
300
44-130
39.0
86%
LED40W-114-C0350-HL-XY-HV
350
38-114
39.9
86%
Convection
LED40W-100-C0400-HL-XY-HV
400
33-100
40
85%
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
LED40W-089-C0450-HL-XY-HV
450
30-89
40
85%
Sound Rating:
Class A
LED40W-072-C0550-HL-XY-HV
550
24-72
39.6
84%
LED40W-057-C0700-HL-XY-HV
700
20-57
40
83%
MTBF @ 40ºC:
482,000 Hours at full load, per MIL-217F Notice 2
LED40W-048-C0830-HL-XY-HV
830
16-48
39.8
83%
EMC:
FCC 47CFR Part 15 Class B compliant
LED40W-045-C0900-HL-XY-HV
900
16-45
40
83%
Weight:
12.9 oz (364 g)
LED40W-040-C1000-HL-XY-HV
1000
13-40
40
82%
LED40W-036-C1100-HL-XY-HV
1100
12-36
39.6
82%
LED40W-030-C1400-HL-XY-HV
1400
10-30
42
82%
LED40W-024-C1670-HL-XY-HV
1670
8-24
40
82%
LED40W-022-C1820-HL-XY-HV
1820
7-22
40
82%
LED40W-018-C2200-HL-XY-HV
2200
6-18
39.6
81%
LED40W-015-C2680-HL-XY-HV
2680
5-15
40
81%
LED40W-013-C3080-HL-XY-HV
3080
4-13
40
81%
LED40W-012-C3330-HL-XY-HV
3330
4-12
40
81%
LED40W-010-C4000-HL-XY-HV
4000
3-10
40
81%
LED40W-009-C4450-HL-XY-HV
4450
3-9
40
80%
-X indicates lead options. B for bottom leads, S for side leads.
-Y indicates dimming options are available. See options below. Blank = fixed current output
Ordering Options:
-D:Dimmable model dims 100-10%. Two extra wires on the output side: +Purple/-Gray. It offers
0-10V & Resistance dimming, compatible with most quality 0-10V dimmers. See page 3.
-P: PWM dimmable version dims 100-10%. Two extra wires on the output side: +Purple/-Gray.
It is PWM Dimmable via a positive duty cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Constant Voltage - Product Specifications
Model Number
Output Voltage
(Vdc ±5%)
Output Current
Range (mA)
Max Output
Power (W)
Typical
Efficiency
LED40W-009-HL-X-HV
9
1113-4450
40
82%
LED40W-010-HL-X-HV
10
1000-4000
40
83%
LED40W-012-HL-X-HV
12
825-3330
40
83%
LED40W-013-HL-X-HV
13
770-3080
40
84%
LED40W-015-HL-X-HV
15
670-2680
40
84%
LED40W-018-HL-X-HV
18
550-2200
39.6
84%
LED40W-022-HL-X-HV
22
455-1820
40
85%
LED40W-024-HL-X-HV
24
418-1670
40
85%
LED40W-030-HL-X-HV
30
350-1400
42
85%
LED40W-036-HL-X-HV
36
275-1100
39.6
85%
LED40W-040-HL-X-HV
40
250-1000
40
85%
LED40W-045-HL-X-HV
45
225-900
40
85%
LED40W-048-HL-X-HV
48
208-830
39.8
85%
LED40W-057-HL-X-HV
57
175-700
40
85%
LED40W-072-HL-X-HV
72
138-550
39.6
85%
LED40W-089-HL-X-HV
89
113-450
40
86%
LED40W-100-HL-X-HV
100
100-400
40
86%
LED40W-114-HL-X-HV
114
75-350
39.9
86%
LED40W-130-HL-X-HV
130
75-300
39.0
87%
Class 2:
US/Canada
Rev 8-26-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - Inches (mm)
Standard “-BY” Bottom Leads Configuration:
“-SY” Optional Side Leads Configuration:
3.78 [96]
3.78 [96]
1.89 [48]
1.18 [30]
1.18 [30]
1.89 [48]
2.8 [71]
Tc = 90°C max
2.8 [71]
Tc = 90°C max
0.39 [10]
0.39 [10.0]
1.2 [30.5]
0.39 [10.0]
1.2 [30.5]
0.39 [10]
1.00
0.95
0.90
30%
95%
25%
90%
20%
PF
THD
0.85
0.80
0.70
5%
0.65
60%
Load
80%
100%
130
347 Vac
480 Vac
85%
80%
CE
FCC, 47CFR Part 15
EN 55015
EN61000-3-2
EN61000-3-3
EN61000-4-5
70%
0%
35% 35%
60%
60%
80%
80%
Normalized
Output Voltage
Load
UL8750, CAN/CSA-C22.2 No. 250.13-12,
UL1310 & CAN/CSA-22.1 No. 223-M91 (for Class 2),
UL1012/CS-C22.2 No.107.1 (for Non-Class 2)
EN 61347-1, EN 61347-2-13
Class B
> 80% Rated Power
Class C
2kV/4kV
5.91 Min [150 Min]
Lifetime / Case Temperature
90
75
60
45
30
347 Vac
480 Vac
75%
Safety and EMC Compliance
UL/CUL
0.39±0.04 [10±1]
115
10%
347 Vac
480 Vac
Dimming
Purple (+)
Gray (-)
0.16 [4]
Typical
Efficiency
THD
/ Load / Load
15%
0.75
0.60
35%
5.91 Min [150 Min]
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
Power Factor / Load
DC OUT
Red (+)
Blue (-)
Lifetime (kHrs)
Dimming
Purple (+)
Gray (-)
AC IN
White (N)
Black (L)
1.4 [35.6]
DC OUT
Red (+)
Blue (-)
0.14 [3.6]
0.2 [5]
0.39±0.04 [10±1]
Efficiency
0.39±0.04 [10±1]
AC IN
White (N)
Black (L)
5.91 Min [150 Min]
0.16 [4]
1.4 [35.6]
0.14 [3.6]
0.2 [5]
15
100%100%
0
45
50
55
60
65
70
75
80
Case Hotspot Temperature (°C)
85
90
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Minimum
Typical
Maximum
0 mA
-2.0 V
——-
2 mA
+15 V
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
“-D” Typical Dimming Circuit
Dim (+) Purple
LED40W-xxx-Cxxxx-HL-D-HV
IP710
Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Control Voltage
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
Purple-to-Gray Voltage (Vdc)
8V
9V
10V
Notes:
1.
2.
3.
4.
D dimmable version comes with an extra two wires on the output side: +Purple/-Gray.
Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent.
D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V.
Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
“-P” Option: PWM Dimming
Parameters
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
Source Current out of PWM Input (Purple Wire)
PWM Input Signal Frequency
PWM Input Signal Positive Duty Cycle
Minimum
Typical
Maximum
-2.0V
-2.0V
+9.0V
0mA
0mA
500Hz
0%
10V
0V
10V
———10-90%
+15V
+5.5V
+15V
1.2mA
2mA
1500Hz
100%
“-P” PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED40W-XX-CXXXX-HL-P-HV
PWM In
PWM (-) Gray
Output Current / 1.0kHz Positive Duty Cycle
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
Positive Duty Cycle
70%
80%
90%
100%
Notes:
1. PD dimmable version comes with an extra 2 wires on the output side for PWM type dimming: +Purple/-Gray.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Similar pages