ASSR-V621 and ASSR-V622 Dual Channel Photovoltaic MOSFET Driver (6.5V/15A) Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The ASSR-V62X Series is specially designed to drive high power MOSFETs. It consists of an AlGaAs infrared lightemitting diode (LED) input stage optically coupled to an output detector circuit. The detector consists of a highspeed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs externally. The relay driver turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay driver turns off (contact opens) with an input voltage of 0.8V or less. Dual Channel Photovoltaic MOSFET Driver The dual channel configurations, ASSR-V621 and ASSRV622, allow 2 independent MOSFETs to be driven. It has the versatility to double the photovoltaic voltage by connecting the 2 channels in series or to double the short circuit current by connecting the 2 channels in parallel. They are available in 8-pin DIP and Gull Wing Surface Mount packages. Open Circuit Voltage: 7V Typical Short Circuit Current: 20A Typical Low Input Current: CMOS Compatibility Fast Switching Speed: 0.3ms (Ton), 0.03ms (Toff ) Typical High Input-to-Output Insulation Voltage (Safety and Regulatory Pending Approvals) - 3750 Vrms for 1 min per UL1577 - CSA Component Acceptance Applications Solid State Relay Module Voltage Supply for electronic circuits CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5. Option Part number RoHS Compliant ASSR-V621 -302E Package Surface Mount Gull Wing 300 mil DIP-8 X X X X X X X X Tape & Reel -002E 50 units per tube -502E 50 units per tube X -002E ASSR-V622 -302E Quantity 1000 units per reel 50 units per tube 300 mil DIP-8 -502E 50 units per tube X 1000 units per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example: ASSR-V621-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Schematic Opto-isolation Opto-isolation 8 1 2 7 2 7 3 6 3 6 5 4 1 Turn-off Circuit Turn-off Circuit Turn-off Circuit Turn-off Circuit 4 ASSR-V621-002E 2 8 5 ASSR-V622-002E Package Outline Drawings 8-Pin DIP Package 7.62 ± 0.25 (0.300 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) 8 TYPE NUMBER 7 6 5 DATE CODE A XXXX LEAD FREE 6.35 ± 0.25 (0.250 ± 0.010) OPTION CODE* YYWW RU 1 2 3 UL RECOGNITION 4 1.78 (0.070) MAX. 1.19 (0.047) MAX. 5° TYP. 3.56 ± 0.13 (0.140 ± 0.005) 4.70 (0.185) MAX. + 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002) 0.51 (0.020) MIN. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). OPTION NUMBERS 300 AND 500 NOT MARKED. 0.65 (0.025) MAX. 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 8-Pin DIP Package with Gull Wing Surface Mount Option 300 LAND PATTERN RECOMMENDATION 9.65 ± 0.25 (0.380 ± 0.010) 8 7 6 1.016 (0.040) 5 6.350 ± 0.25 (0.250 ± 0.010) 1 2 3 10.9 (0.430) 4 2.0 (0.080) 1.27 (0.050) 1.19 (0.047) MAX. 1.780 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 3.56 ± 0.13 (0.140 ± 0.005) 1.080 ± 0.320 (0.043 ± 0.013) 0.635 ± 0.25 (0.025 ± 0.010) 0.635 ± 0.130 2.54 (0.025 ± 0.005) (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 3 + 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002) 12° NOM. Lead Free IR Profile tp TEMPERATURE (°C) Tp TL TIME WITHIN 5°C of ACTUAL PEAK TEMPERATURE 20-40 SEC. 260 +0/-5°C 217°C RAMP-UP 3°C/SEC. MAX. 150 - 200°C T smax RAMP-DOWN 6°C/SEC. MAX. T smin ts PREHEAT 60 to 180 SEC. tL 60 to 150 SEC. 25 t 25°C to PEAK TIME (SECONDS) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C Use of non-chlorine-activated fluxes is highly recommended. Note: Non-Halide flux should be used. Regulatory Information The ASSR-V621-002E and ASSR-V622-002E are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approved under CSA Component Acceptance Notice #5. Insulation and Safety Related Specifications Parameter Symbol ASSR-V621-002E ASSR-V622-002E Units Conditions Minimum External Air Gap (Clearance) L(101) 7.1 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 7.4 mm Measured from input terminals to output terminals, shortest distance path along body. 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. 175 V DIN IEC 112/VDE 0303 Part 1 Minimum Internal Plastic Gap (Internal Clearance) Tracking Resistance (Comparative Tracking Index) Isolation Group (DIN VDE0109) 4 CTI IIIa Material Group (DIN VDE 0109) Absolute Maximum Ratings Parameter Symbol Min. Max. Storage Temperature TS -55 125 °C Operating Temperature TA -40 85 °C 260 °C Lead Soldering Cycle Temperature Input Current Average Time IF Units 10 s 30 mA Surge 300 Transient 1000 Reversed Input Voltage VR 5 V Input Power Dissipation PIN 100 mW Solder Reflow Temperature Profile See Lead Free IR Profile Note Recommended Operating Conditions Parameter Symbol Min. Max. Units Input Current (ON) IF(ON) 3 30 mA Input Voltage (OFF) VF(OFF) 0 0.8 V Operating Temperature TA -40 +85 °C Note Package Characteristics Unless otherwise specified, operating temperature TA = 25°C. Parameter Symbol Min. Input-Output Momentary Withstand Voltage VISO 3750 Input-Output Resistance RI-O Input-Output Capacitance CI-O Typ. Max. Units Conditions Vrms RH ≤ 50%, t = 1 min 1012 Ω VI-O = 500 Vdc 0.6 pF f = 1 MHz; VI-O = 0 Vdc Fig. Note 1 Electrical Specifications (DC) For operating TA = +25°C Parameter Symbol Min. Typ. Open Circuit Voltage VOC 6.5 Short Circuit Current ISC 15 Input Reverse Breakdown Voltage VR 5 Input Forward Voltage VF 1.1 Units Conditions 7 V IF =10mA, IO=0mA 20 A IF =10mA, VO=0V V IR =10A V IF =10mA Parameter Symbol Min. Units Conditions Turn On Time TON 0.28 ms IF =10mA, CL=1nF Turn Off Time TOFF 0.03 ms IF =10mA, CL=1nF 1.3 Max. 1.7 Fig. Note Switching Specifications (AC) For operating TA = +25°C Typ. Max. Note: 1. Device is considered as a two terminal device; pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. 5 Fig. Note VOC - OPEN CIRCUIT OUTPUT VOLTAGE - V ISC-SHORTCIRCUITOUTPUTCURRENT- μA 70 60 IF=30mA 50 40 IF=20mA 30 20 IF=10mA 10 0 -50 IF=5mA -25 IF=3mA 0 25 50 TA - TEMPERATURE - °C 75 100 6 IF=5mA IF=3mA 2 0 -50 40 TOFF - TURN OFF TIME - μs 500 IF=10mA 300 200 100 -25 IF=10mA 4 50 0 -50 IF=20mA 8 600 400 IF=30mA -25 0 25 50 TA - TEMPERATURE - °C 75 100 Figure 2. VOC vs Temperature Figure 1. Short Circuit Output Current vs TON - TURN ON TIME - μs 10 0 25 50 TA - TEMPERATURE - °C 75 100 Figure 3. TON vs Temperature For product information and a complete list of distributors, please go to our web site: IF=10mA 30 20 10 0 -50 -25 Figure 4. TOFF vs Temperature www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV02-0259EN - March 19, 2012 0 25 50 TA - TEMPERATURE - °C 75 100