CITIZEN CL-L400-MC1L1-B Internal structure:lead frame Datasheet

DATA SHEET
CL-L400-MC1L1-B
and
are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN.
is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.
Ref.CE-P2173 10/12
DATASHEET
1/12
1. Scope of Application
This data sheet is applied to the LED package, model CL-L400-MC1L1-B.
2. Part code
CL-L400-MC1L1-B
[1]
[2]
[3]
[1] Part Code
[2] CRI
80 min
[3] Correlated color temperature 3000K
< Features >
- External Dimensions:5.0 x 5.0 x 0.8
- Internal Structure:Lead frame
-Luminous Flux: 112 lm @ 350 mA
-CCT: 3000K (ANSI C78.377 Compliant, in 3-Step MacAdam Ellipse)
-CRI: Ra 80min.
-Thermal Resistance: 9 C/W
- RoHS Compliant
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
2/12
3. Outline drawing
Unit : mm
Tolerances unless otherwise specified : +/-0.1
Protection
device
Cathode mark
Anode
Cathode
Anode
Cathode
Ts : Anode soldering terminal.
4. Performance
(1) Absolute Maximum Rating
Symbol
Parameter
Input Power
Pi
IF
Forward Current
IF min
Minimum current
IR
Reverse Current
Top
Operating Temperature
Tst
Storage Temperature
Soldering terminal Temperature Ts
Tj
Junction Temperature
Rating Value
2.3
600
30
Unit
*1
1
-30 ~ +85
-40 ~ +100
W
mA
mA
mA
C
C
85
120
C
C
*2
*1
*3
*1 Input power and forward current are the values when the LED is used within the range of
the derating curve in this data sheet.
*2 Refer to 3. Outline drawing for Ts measurement point
*3 D.C. Current : Tj = Ts + Rj-s X Pi
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
3/12
(2) Electro-optical Characteristics
Parameter
Forward Voltage
Symbol
VF
Condition
IF=350mA
Luminous Flux
CRI
Thermal Resistance
Φv
Ra
IF=350mA
IF=350mA
Rj-s
Junction-Solder
Typ.
3.01
112
9.0
Min.
2.75
84
80
-
Max.
3.35
-
Tc=25C
Unit
V
lm
C/W
Chromaticity coordinates ( Condition : IF=350mA, Ts = 25C)
Center
Reference (ANSI C78.377)
x
Center 0.4338
a
0.4562
3000K
b
0.4299
c
0.4147
d
0.4373
x
y
0.4338
0.4030
Oval parameter
a
b
θ°
0.00834
0.00408
53.17
y
0.4030
0.4260
0.4165
0.3814
0.3893
*Color region stay within MacAdam "3-step" ellipse from the chromaticity center.
*The chromaticity center refers to ANSI C78.377:2008.
*θ is the angle between the major axis of the ellipse and the x-axis,
and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)
x-y chart-CIE1931
0.43
3400K
0.42
3200K
3000K
Color region
0.41
y
Color region
(ANSI)
0.40
B.B. Locus
0.39
0.38
2800K
0.41
0.42
0.43
x
0.44
0.45
0.46
Note: The tolerance of measurement at our tester is VF+/-3% , Φv+/-10% , Chromaticity(x,y)+/-0.005 and Ra+/-1.
(3) Ranking information
Parameter
Synbol
Forward Voltage
VF
Luminous Flux
φv
Rank
Q
R
S
C
D
Min
2.75
2.95
3.15
84
112
Max
2.95
3.15
3.35
112
140
Unit
V
lm
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
4/12
5. Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Ts=25C
3.5
Relative Luminous Flux [a.u.]
3.0
VF [V]
2.5
2.0
1.5
1.0
0.5
0.0
0
200
400
Ts=25C
200%
180%
160%
140%
120%
100%
80%
60%
40%
20%
0%
600
0
200
IF [mA]
Forward Current vs. Chromaticity Coordinate
600
Solder Temperature vs. Chromaticity Coordinate
Ts=25C
0.020
Δx
0.015
Δy
0.010
IF=350mA
0.020
Δx
0.015
Δy
0.010
0.005
△x, △y
△x, △y
400
IF [mA]
0.000
-0.005
0.005
0.000
-0.005
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
0
200
400
600
0
IF [mA]
20
40
60
80
100
Ts [C]
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
Solder Temperature vs. Forward Voltage
5/12
Solder Temperature vs. Relative Luminous Flux
IF=350mA
IF=350mA
120%
100%
Relative Luminous Flux [a.u.]
VF [V]
3.0
2.0
1.0
80%
60%
40%
20%
0.0
0%
0
25
50
75
100
0
25
Ts [C]
50
75
100
Ts [C]
Solder Temperature vs. Allowable Forward Current Spectrum
Ts=25C, IF =350 mA
600
500
IF [mA]
120%
Relative Emission Intensity [a.u.]
700
400
300
200
100
100%
80%
60%
40%
20%
0%
0
0
25
50
75
100
125
350
150
450
550
650
750
850
λ [nm]
Ts [C]
Directive Characteristic
-40°
-30°
-20° -10°
100%
10° 20°
30°
40°
-50°
50°
80%
Y
-60°
60%
60°
-70°
40%
70°
-80°
20%
X
-90°
0%
80°
X direction
Y direction
90°
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
6/12
6. Reliability
(1)Datails of the tests
Test Item
Test Condition
Continuous Operation Test
IF=350mA Ta=25C × 1000 hours
Low Temperature Storage Test
High Temperature Storage Test
Moisture-proof Test
Thermal Shock Test
-40 C × 1000 hours
100 C × 1000 hours
85 C, 85 %RH for 500 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
Solder Heat Resistance Test
Recommended temperature profile (reflow soldering) x 2,
(2nd test must be started after the samples are stabilized thermarlly.)
(2)Judgement Criteria of Failure for Reliability Test
(Ta=25C)
Measuring Item
Forward Voltage
Total Luminous Flux
Symbol
VF
Φv
Measuring Condition
IF=350mA
IF=350mA
Judgement Criteria for Failure
>U X 1.2
<S X 0.7
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
7/12
7. Taping Specifications
(1) Shape and dimensions of Reel
Unit:mm
(2) Dimensions of Career Tape
Unit:mm
Cathode
Anode
(3) Configration of Tape
(END)
More than 40mm
(START)
LED mouted part
Leading part more than 400mm
Unloaded part
(4) Quantity : 4000 pcs/reel
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
8/12
8. Packing Specifications
(1) Moisture proof packing
-To prevent moisture absorption during transportation and storage, reels are packed in
aluminum envelopes which contain a desiccant with a humidity indicator.
Aluminum envelop
Reel
Desiccant
Polyester Zip fastener
Label
(2) Storage
-To prevent moisture absorption, it is strongly recommended that reels (in bulk or taped
should be stored in the dry box (or the desiccator) with a desiccant as the appropriate
storage place. If not, the following is recommended.
Temperature :
Humidity :
5-30 C
60%RH max
The devices should be mounted within 168H (7days) after unpacking.
If you store the unpacked reels, please store them in the dry box or seal them into
the envelop again.
(3) Environmental conditions
-This device contain silver plated electrode. So, when being exposed to enviroment which
contains corrosive gases, the silver plating becomes tarnished.
Tarnished plating may lead to poor solderbility and degradation of optical characteristics.
-Please DO NOT expose this device to corrosive atomosphere anytime (during storage,
after mounting). Please take care the above when designing your product.
-For outdoor use, necessary measures should be taken to prevent water, moisture
and salt air damage.
-This product is NOT designed with following conditions in mind.
In water, oil, medicament, organic solvent and dust-laden environment.
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
9/12
9. Precautions
(1) Handling with care for this product
-The light emitting area is encapsulated with soft resin materials.
Please avoid the resin area from being pressed, stressed, rubbed,
come into contact with sharp metal nail because the function,
performance and reliability of this product are negatively impacted.
(resin area)
-Please be aware that this product should not come into contact with any other parts while
incorporating in your lighting apparatus or your other products.
-When pick and place this product, it is recommended that
using the pick up nozzle with inner radius more than 4.4mm.
-Please avoid using narrow pick up nozzle, and pushing
the resin area directly.
-Bending the circuit board with soldered LEDs may cause breakage
of package. Please take care to bow, twist and warpage the PCB.
φ =4.4mm
NG
Cathode mark
(2) Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity because this is
a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced such as
the wearing of a wristband or anti-satatic gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, career
machine and conveyane unit) should be connected to ground and please avoid the product
to be electric-charged.
-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).
-After assembling the LEDs into your final products, it is recommended to check AB34
whether the assembled LEDs are damaged by static electricity (electirical leak phenomenon)
or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
10/12
9. Precautions (Continued)
(3) Thermal design
-The thermal design to draw heat away from the LED junction is most critical parameter
for an LED illumination system. High operating temperatures at the LED junction adversely
affect the performance of LED’s light output and lifetime.
Therefore the LED junction temperature should not exceed the absolute maximum rating
in LED illumination system.
-The LED junction temperature while operation of LED illumination system depends upon
thermal resistance of internal LED package (Rj-s), outer thermal resistances of LED package,
power loss and ambient temperature. Please take both of the thermal design specifications
and ambient temperature conditions into consideration for the setting of driving conditions.
-For more information, please refer to application note "Thermal Management".
(4) Driving current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products
in series and control the driving current to keep under the absolute maximum rating forward
current value.
-Electrical transient might apply excess voltage, excess current and reverse voltage
to the product(s).
They also affect negative impact on the product(s) therefore please make sure that
no excess voltage, excess current and reverse voltage is applied to the product(s)
when the LED driver is turn-on and/or turn-off.
-For more information, please refer to application note "Driving".
(5) Lighting at a minimum current value
-In a case where the minimum current (IF min) is applied to the product, some of LED dice
in the product might look different in their brightness due to the individual difference of
the LED dice, and they are not failed.
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
11/12
9. Precautions (Continued)
(6) Soldering
-This product is adaptable to reflow process, and please use lead-free soldering.
Following soldering paste is recommended.
Melting temperature : 216 - 220 C.
Composition : Sn-3.5Ag-0.75Cu
T e m p e r a tu re
-The temperature profile at the top surface of the parts is recommended as shown below.
4 °C/sec. Max
4 °C/sec. Max
220°C
160 ~ 180°C
140sec
260°C Max
3sec. Max
60 ~ 70sec
Time
-Next process of soldering should be carried out after the product has return to ambient
temperature.
-Recommemded soldering pattern is shown to the right,
but mountability and solderability need to be optimized
with actual conditions such as amount of solder,
reflow temperature the process.
9) Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
-When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux,
spectrum and light distribution are factors that affect the risk group determination of the LED,
and especially a high-power LED, that emits light containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions might greatly increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
DATASHEET
12/12
10. Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
(2) All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
(4) Absent a written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
Symbol
CITILED
Name
CL-L400-MC1L1-B
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2173 10/12
Similar pages