ON NLX1G99DMUTCG Configurable multifunction gate Datasheet

NLX1G99
Configurable Multifunction
Gate
The NLX1G99 MiniGatet is an advanced high−speed CMOS
multifunction gate with a 3−state output. With the output enable input
(OE) at High, the output is disabled and is kept at high impedance.
With the output enable input (OE) at Low, the device can be
configured for logic functions such as MUX, AND, OR, NAND,
NOR, XOR, XNOR, INVERT and BUFFER, depending on the
combination of the 4−bit input. The device has Schmitt−trigger inputs,
thereby enhancing noise immunity.
The NLX1G99 input and output structures provide protection when
voltages up to 7.0 V are applied, regardless of the supply voltage.
www.onsemi.com
MARKING
DIAGRAMS
UDFN8
1.45 x 1.0
CASE 517BZ
1
UDFN8
1.6 x 1.0
CASE 517BY
1
XM
Features
•
•
•
•
•
•
•
High Speed: tPD = 6.7 ns (Max) @ VCC = 3.3 V
Low Power Dissipation: ICC = 1 mA (Max) at TA = 25°C
Power Down Protection Provided on inputs
Balanced Propagation Delays
Overvoltage Tolerant (OVT) Input and Output Pins
Ultra−Small Packages
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
UDFN8
1.95 x 1.0
CASE 517CA
XM
AF M
1
AA or E = Specific Device Code
M
= Date Code
G
= Pb−Free Package
PIN ASSIGNMENT
1
OE
2
A
3
B
ORDERING INFORMATION
4
GND
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
5
C
6
D
7
Y
8
VCC
PIN ASSIGNMENTS
OE 1
A
2
8 VCC
7
Y
B 3
6 D
GND 4
5 C
(Top View)
© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 6
1
Publication Order Number:
NLX1G99/D
NLX1G99
FUNCTION DIAGRAM
OE
A
Y
B
C
D
Figure 1. Function Diagram
FUNCTION TABLE*
INPUT
OUTPUT
OE
D
C
B
A
Y
L
L
L
L
L
L
L
L
L
L
H
H
L
L
L
H
L
L
L
L
L
H
H
H
L
L
H
L
L
L
L
L
H
L
H
L
L
L
H
H
L
H
L
L
H
H
H
H
L
H
L
L
L
H
L
H
L
L
H
L
L
H
L
H
L
H
L
H
L
H
H
L
L
H
H
L
L
H
L
H
H
L
H
H
L
H
H
H
L
L
L
H
H
H
H
L
H
H or L
H or L
H or L
H or L
Z
*To select a logic function, please refer to “Logic Configurations” section.
FUNCTION SELECTION
LOGIC CONFIGURATION PAGE
3−State Buffers
3
3−State Inverters
3
3−State MUXes
3
3−State AND / OR / NOR
4
3−State NAND / OR
5
3−State XOR/XNOR
6
www.onsemi.com
2
NLX1G99
LOGIC CONFIGURATIONS
3−State Buffer Functions Available
OE
Input
Y
Figure 2.
Function
OE
A
B
C
D
3−State Buffer
L
Input
H or L
L
H
H
H or L
L
H or L
Input
H
L
H or L
L
L
L
H
Input
Input
L
H
H or L
L
L
L
H
Input
Input
Input
3−State Inverter Functions Available
OE
Input
Y
Figure 3.
Function
OE
A
B
C
D
3−State Buffer
L
Input
X
L
H
H
H or L
H
H or L
Input
H
L
H or L
H
H
L
H
Input
Input
L
H
H or L
H
H
H
L
Input
Input
Input
3−State MUX Functions Available
OE
OE
A/B
A/B
Input 1
Y
Input 2
Input 1
Y
Input 2
Figure 4.
Function
OE
A
B
C
D
3−State 2−to−1
3−State 2−to−1
3−State 2−to−1, Inverted Out
3−State 2−to−1, Inverted Out
L
Input 1
Input 2
Input 1
Input 2
Input 2
Input 1
Input 2
Input 1
Input 1 or Input 2
Input 2 or Input 1
Input 1 or Input 2
Input 2 or Input 1
L
L
H
H
www.onsemi.com
3
NLX1G99
3−State AND/NOR/OR Function Available
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 5.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State AND
3−State AND
3−State NOR
3−State NOR
L
L
L
Input 1
Input 2
Input 2
Input 1
L
L
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 6.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State AND
3−State AND
3−State NOR
3−State NOR
L
Input 2
H
L
Input 1
Input 1
Input 2
L
H
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 7.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State AND
3−State AND
3−State NOR
3−State NOR
L
Input 1
H
L
Input 2
Input 2
Input 1
L
H
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 8.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State AND
3−State AND
3−State OR
3−State OR
L
Input 1
Input 2
H
H
Input 2
Input 1
L
L
www.onsemi.com
4
NLX1G99
3−State NAND/OR Function Available
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 9.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State NAND
3−State NAND
3−State OR
3−State OR
L
L
L
Input 1
Input 2
Input 2
Input 1
H
H
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 10.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State NAND
3−State NAND
3−State OR
3−State OR
L
Input 2
H
L
Input 1
Input 1
Input 2
H
L
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 11.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State NAND
3−State NAND
3−State OR
3−State OR
L
Input 1
H
L
Input 2
Input 2
Input 1
H
L
OE
OE
Input 1
Input 1
Y
Input 2
Y
Input 2
Figure 12.
No. of Inputs
AND/NAND Function
OR/NOR Function
OE
A
B
C
D
2
2
3−State AND
3−State AND
3−State OR
3−State OR
L
Input 1
Input 2
H
H
Input 2
Input 1
L
L
www.onsemi.com
5
NLX1G99
3−State XOR/XNOR Function Available
OE
Input 1
Y
Input 2
Figure 13.
Function
OE
A
B
C
D
3−State XOR
L
Input 1
Input 2
H or L
H or L
L
L
H or L
H or L
Input 1
Input 2
H
H
L
L
H
H
Input 1
Input 2
Input 2
Input 1
Input 2
Input 1
Input 2
Input 1
OE
Input 1
Y
Input 2
Figure 14.
Function
OE
A
B
C
D
3−State XOR
L
H
L
Input 1
Input 2
OE
Input 1
Y
Input 2
Figure 15.
Function
OE
A
B
C
D
3−State XOR
L
H
L
Input 1
Input 2
OE
Input 1
Y
Input 2
Figure 16.
Function
OE
A
B
C
D
3−State XNOR
3−State XNOR
L
H
H
L
L
Input 1
Input 2
Input 2
Input 1
www.onsemi.com
6
NLX1G99
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
DC Supply Voltage
−0.5 to +7.0
V
VIN
DC Input Voltage
−0.5 to +7.0
V
−0.5 to VCC + 0.5
−0.5 to +7.0
−0.5 to +7.0
V
VIN < GND
−50
mA
VOUT < GND
−50
mA
VOUT
Parameter
DC Output Voltage
Active Mode (High or Low State)
Tristate Mode (Output at Hi−Z)
Power Down Mode (VCC = 0 V)
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IO
DC Output Source/Sink Current
±50
mA
ICC
DC Supply Current Per Supply Pin
±100
mA
IGND
DC Ground Current per Ground Pin
±100
mA
TSTG
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature Under Bias
150
°C
MSL
FR
VESD
ILATCHUP
Moisture Sensitivity
Level 1
Flammability Rating Oxygen Index: 28 to 34
ESD Withstand Voltage
UL 94 V−0 @ 0.125 in
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
Latchup Performance Above VCC and Below GND at 125°C (Note 5)
> 2000
> 200
N/A
V
±500
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
Positive DC Supply Voltage
VIN
Digital Input Voltage
VOUT
Output Voltage
TA
Operating Free−Air Temperature
Dt /DV
Input Transition Rise or Fall Rate
Active Mode (High or Low State)
Tristate Mode (Output at Hi−Z)
Power Down Mode (VCC = 0 V)
VCC = 2.5 V $ 0.2 V
VCC = 3.3 V $ 0.3 V
VCC = 5.0 V $ 0.5 V
Min
Max
Unit
1.65
5.5
V
0
5.5
V
0
0
0
VCC
5.5
5.5
V
−55
+125
°C
0
0
0
No Limit
No Limit
No Limit
nS/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
7
NLX1G99
DC ELECTRICAL CHARACTERISTICS
TA = 255C
Symbol
Parameter
Conditions
VCC (V)
Min
Max
TA v +855C
TA = −555C to
+1255C
Min
Min
VT+
Positive
Threshold
Voltage
1.65
1.8
2.3
3.0
4.5
5.5
0.79
0.87
1.11
1.5
2.16
2.61
1.16
1.28
1.56
1.87
2.74
3.33
VT−
Negative
Threshold
Voltage
1.65
1.8
2.3
3.0
4.5
5.5
0.35
0.38
0.58
0.84
1.41
1.78
0.62
0.68
0.87
1.19
1.9
2.29
0.35
0.38
0.58
0.84
1.41
1.78
VH
Hysteresis
Voltage
1.65
1.8
2.3
3.0
4.5
5.5
0.30
0.33
0.40
0.53
0.71
0.8
0.62
0.68
0.8
0.87
1.04
1.2
0.30
0.33
0.40
0.53
0.71
0.8
VOH
Minimum
High−Level
Output Voltage
VIN = VT−MIN or
VT+MAX
IOH = −50 mA
IOH = −100 mA
VIN = VT−MIN or
VT+MAX
IOH = −4 mA
IOH = −8 mA
IOH = −12 mA
IOH = −16 mA
IOH = −24 mA
IOH = −32 mA
VOL
Maximum
Low−Level
Output Voltage
Max
1.16
1.28
1.56
1.87
2.74
3.33
Max
Unit
1.16
1.28
1.56
1.87
2.74
3.33
V
0.35
0.38
0.58
0.84
1.41
1.78
0.62
0.68
0.8
0.87
1.04
1.2
0.30
0.33
0.40
0.53
0.71
0.8
V
0.62
0.68
0.8
0.87
1.04
1.2
V
V
1.65−5.5
1.65−5.5
VCC−0.1
VCC−0.1
VCC−0.1
VCC−0.1
VCC−0.1
VCC−0.1
V
1.65
2.3
2.7
3.0
3.0
4.5
1.2
1.9
2.2
2.4
2.3
3.8
1.2
1.9
2.2
2.4
2.3
3.8
1.2
1.9
2.2
2.4
2.3
3.8
V
VIN = VT−MIN or
VT+MAX
IOL = 50 mA
IOL = 100 mA
1.65−5.5
1.65−5.5
0.1
0.1
0.1
0.1
0.1
0.1
VIN = VT−MIN or
VT+MAX
IOL = 4 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
IOL = 32 mA
1.65
2.3
2.7
3.0
3.0
4.5
0.45
0.3
0.4
0.4
0.55
0.55
0.45
0.3
0.4
0.4
0.55
0.55
0.45
0.3
0.4
0.4
0.55
0.55
IIN
Input Leakage
Current
0 v VIN v
5.5 V
0 − 5.5
$0.1
$1.0
$1.0
mA
Ioff
Power off
Leakage
Current
VIN or VO =
5.5 V
0
$1.0
$10
$10
mA
IOZ
Tri−state
Output
Leakage
Current
VO = VCC or
GND
1.65−5.5
$1.0
$10
$10
mA
ICC
Quiescent
Supply Current
VIN = VCC or
GND, IO = 0
1.65−5.5
1.0
10
10
mA
DICC
Increase in ICC
Per Input
One input at
(VCC−0.6) V,
other inputs at
VCC or GND
2.3 − 5.5
10
100
100
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
8
NLX1G99
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns)
TA = 255C
TA v +855C
TA = −555C
to +1255C
Symbol
Parameter
VCC (V)
Test Condition
Min
Typ
Max
Min
Max
Min
Max
Unit
tPLH,
tPHL
Propagation
Delay, Any
Input to Output
Y (See Test
Circuit)
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
positions and loading
conditions in
Figure 17 to 21.
4.3
2.4
1.7
1.3
12.8
7.1
5.2
4.0
25.1
10.2
6.7
4.5
4.3
2.4
1.7
1.3
25.1
10.2
6.9
4.9
4.3
2.4
1.7
1.3
25.1
10.2
7.0
5.0
ns
tEN
Output Enable
Time, OE to Y
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
positions and loading
conditions in
Figure 17 to 21.
3.4
2.1
1.3
1.0
24.7
11
7.5
5.7
3.4
2.1
1.3
1.0
24.7
12
8.0
6.2
3.4
2.1
1.3
1.0
24.7
12.2
8.3
6.5
ns
tDIS
Output Disable
Time, OE to Y
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
positions and loading
conditions in
Figure 17 to 21.
4.0
2.7
3.5
2.0
15.5
7.5
7.0
5.5
4.0
2.7
3.5
2.0
15.5
7.5
7.0
5.5
4.0
2.7
3.5
2.0
15.5
7.5
7.0
5.5
ns
tPLH,
tPHL
Propagation
Delay, Any
Input to Output
Y (See Test
Circuit)
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
Positions and loading
conditions in
Figure 22 to 26.
4.3
2.5
2.3
1.6
25.7
10.7
7.6
5.2
4.3
2.5
2.3
1.6
25.7
10.7
7.6
5.2
4.3
2.5
2.3
1.6
25.7
10.7
7.6
5.2
ns
tEN
Output Enable
Time, OE to Y
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
Positions and loading
conditions in
Figure 22 to 26.
4.2
2.4
2.0
1.7
25.2
11.3
8.0
6.0
4.2
2.4
2.0
1.7
25.2
12.2
8.5
6.5
4.2
2.4
2.0
1.7
25.2
13
8.7
6.7
ns
tDIS
Output Disable
Time, OE to Y
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Refer to switch
Positions and loading
conditions in
Figure 22 to 26.
3.7
2.0
2.1
1.0
15
6.5
5.6
4.5
3.7
2.0
2.1
1.0
15
6.7
5.8
4.7
3.7
2.0
2.1
1.0
15
6.9
5.9
4.9
ns
CIN
Input
Capacitance
3.3
3.5
pF
CO
Output
Capacitance
3.3
6.0
pF
CPD
Power
Dissipation
Capacitance
(Note 6)
3.3
22
pF
f = 10 MHz
13.6
7.8
5.6
4.4
6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the dynamic operating current consumption without
load. Average operating current can be obtained by the equation ICC(OPR) = CPD • VCC • fin + ICC. CPD is used to determine the no−load
dynamic power consumption: PD = CPD • VCC2 • fin + ICC • VCC.
www.onsemi.com
9
NLX1G99
TEST CIRCUIT AND VOLTAGE WAVEFORMS
From Output
Under Test
RL
VLOAD
S1
CL *
S1
Test
Open
GND
RL
tPLH/tPHL
Open
tPLZ/tPZL
VLOAD
tPHZ/tPZH
GND
*CL includes probes and jig capacitance.
Figure 17. Load Circuit
Inputs
VCC
VI
tr/tf
VM
VLOAD
CL
RL
VD
1.8 V $ 0.15 V
VCC
v 2 ns
VCC/2
2 x VCC
15 pF
1 MW
0.15 V
2.5 V $ 0.2 V
VCC
v 2 ns
VCC/2
2 x VCC
15 pF
1 MW
0.15 V
3.3 V $ 0.3 V
3V
v 2.5 ns
1.5 V
6V
15 pF
1 MW
0.3 V
5.5 V $ 0.5 V
VCC
v 2.5 ns
VCC/2
2 x VCC
15 pF
1 MW
0.3 V
Timing Input
tW
Input
VI
VM
0V
VI
VM
VM
tsu
0V
Data Input
th
VM
VI
VM
0V
Figure 18. Voltage Waveforms Pulse Duration
VI
Input
VM
VM
VM
tPHL
Output
Control
0V
tPHL
tPLH
Output
Output
Figure 19. Voltage Waveforms Setup and Hold
Times
VM
Output
Waveform 1
S1 at VLOAD
(Note 7)
VOH
VOL
tPLH
VM
VM
VM
VM
0V
VM
tPZH
VOH
Output
Waveform 2
S1 at GND
(Note 7)
VOL
Figure 20. Voltage Waveforms Propagation Delay
Times Inverting and Noninverting Outputs
VI
VM
VLOAD/2
VOL + VD
VOL
tPHZ
VOH
VOH − VD
[0 V
Figure 21. Voltage Waveforms Enable and
Disable Times Low− and High−Level Enabling
7. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control
8. All input pulses are supplied by generators having the following characteristics: PRR v 10 MHz, ZO = 50 W.
9. The outputs are measured one at a time, with one transition per measurement.
10. All parameters are waveforms are not applicable to all devices.
www.onsemi.com
10
NLX1G99
From Output
Under Test
VLOAD
S1
RL
Test
S1
tPLH/tPHL
Open
tPLZ/tPZL
VLOAD
tPHZ/tPZH
GND
Open
GND
CL *
RL
*CL includes probes and jig capacitance.
Figure 22. Load Circuit
Inputs
VCC
VI
tr/tf
VM
VLOAD
CL
RL
VD
1.8 V $ 0.15 V
VCC
v 2 ns
VCC/2
2 x VCC
30 pF
1 kW
0.15 V
2.5 V $ 0.2 V
VCC
v 2 ns
VCC/2
2 x VCC
30 pF
500 W
0.15 V
3.3 V $ 0.3 V
3V
v 2.5 ns
1.5 V
6V
50 pF
500 W
0.3 V
5.5 V $ 0.5 V
VCC
v 2.5 ns
VCC/2
2 x VCC
50 pF
500 W
0.3 V
Timing Input
tW
Input
VI
VM
0V
VI
VM
VM
tsu
0V
Data Input
th
VM
VI
VM
0V
Figure 23. Voltage Waveforms Pulse Duration
VI
Input
VM
VM
Output
VM
tPHL
Output
Control
0V
tPHL
tPLH
Output
Figure 24. Voltage Waveforms Setup and Hold
Times
VM
Output
Waveform 1
S1 at VLOAD
(Note 11)
VOH
VOL
tPLH
VM
VM
VM
VM
0V
VM
tPZH
VOH
Output
Waveform 2
S1 at GND
(Note 11)
VOL
Figure 25. Voltage Waveforms Propagation Delay
Times Inverting and Noninverting Outputs
VI
VM
VLOAD/2
VOL + VD
VOL
tPHZ
VOH
VOH − VD
[0 V
Figure 26. Voltage Waveforms Enable and
Disable Times Low− and High−Level Enabling
11. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control
12. All input pulses are supplied by generators having the following characteristics: PRR v 10 MHz, ZO = 50 W.
13. The outputs are measured one at a time, with one transition per measurement.
14. All parameters are waveforms are not applicable to all devices.
www.onsemi.com
11
NLX1G99
ORDERING INFORMATION
Package
Shipping†
NLX1G99DMUTCG
UDFN8, 1.95 x 1.0, 0.5P
(Pb−Free)
3000 / Tape & Reel
NLX1G99DMUTWG
UDFN8, 1.95 x 1.0, 0.5P
(Pb−Free)
3000 / Tape & Reel
NLX1G99EMUTCG
(In Development)
UDFN8, 1.6 x 1.0, 0.4P
(Pb−Free)
3000 / Tape & Reel
NLX1G99FMUTCG
(In Development)
UDFN8, 1.45 x 1.0, 0.35P
(Pb−Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
12
NLX1G99
PACKAGE DIMENSIONS
UDFN8 1.6x1.0, 0.4P
CASE 517BY
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
e/2
0.49
e
1
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.60 BSC
1.00 BSC
0.40 BSC
0.25
0.35
0.30
0.40
L
8X
0.26
4
L1
1.24
8
5
BOTTOM VIEW
8X
b
0.10
M
C A B
0.05
M
C
0.53
1
PKG
OUTLINE
0.40
PITCH
DIMENSIONS: MILLIMETERS
NOTE 3
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
13
NLX1G99
PACKAGE DIMENSIONS
UDFN8 1.45x1.0, 0.35P
CASE 517BZ
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
ÉÉ
ÉÉ
ÉÉ
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
0.48
e/2
e
1
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.45 BSC
1.00 BSC
0.35 BSC
0.25
0.35
0.30
0.40
8X
0.22
L
4
L1
1.18
8
5
BOTTOM VIEW
8X
0.53
b
0.10
M
C A B
0.05
M
C
NOTE 3
PKG
OUTLINE
0.35
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
14
1
NLX1G99
PACKAGE DIMENSIONS
UDFN8 1.95x1.0, 0.5P
CASE 517CA
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
e/2
0.49
e
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.95 BSC
1.00 BSC
0.50 BSC
0.25
0.35
0.30
0.40
L
8X
0.30
4
1
L1
1.24
8
5
8X
BOTTOM VIEW
b
0.10
M
C A B
0.05
M
C
0.54
NOTE 3
1
PKG
OUTLINE
0.50
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
MiniGate is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
15
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NLX1G99/D
Similar pages