ON NHPJ08S600G Switchmode power rectifier Datasheet

NHPV08S600G,
NHPJ08S600G
SWITCHMODE
Power Rectifiers
Features
•
•
•
•
•
•
http://onsemi.com
Ultrafast 30 Nanosecond Recovery Time
150°C Operating Junction Temperature
High Voltage Capability of 600 V
Low Forward Drop
Low Leakage Specified @ 125°C Case Temperature
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
PLANAR ULTRAFAST
RECTIFIERS 8 A, 600 V
1
4
3
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
3
1
4
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for
10 Seconds
1
1
3
TO−220AC
CASE 221B
3
TO−220 FULLPAK
CASE 221AG
MARKING DIAGRAMS
AY WW
HPV8S600G
KA
A
Y
WW
G
KA
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2013
April, 2013 − Rev. 1
1
AYWW
HPJ8S600G
KA
=
=
=
=
=
Assembly Location
Year
Work Week
Pb−Free Package
Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Publication Order Number:
NHPV08S600/D
NHPV08S600G, NHPJ08S600G
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
Value
Unit
VRRM
VRWM
VR
600
V
Average Rectified Forward Current (Rated VR)
TO−220AC
TO−220FP
IF(AV)
8 A @ TC = 130°C
8 A @ TC = 95°C
A
Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz)
TO−220AC
TO−220FP
IFRM
8 A @ TC = 125°C
8 A @ TC = 85°C
A
IFSM
80
A
TJ, Tstg
−55 to +150
°C
Nonrepetitive Peak Surge Current (Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
Operating Junction Temperature and Storage Temperature Range
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
NHPV08S600G: Thermal Resistance
Junction−to−Case (Note 1)
RqJC
1.5
NHPJ08S600G: Thermal Resistance
Junction−to−Case (Note 1)
RqJC
4.25
Unit
°C/W
°C/W
1. Junction−to−Case shown as a typical value using a fixed 25°C cold plate boundary.
ELECTRICAL CHARACTERISTICS
Characteristic
Test Conditions
Symbol
Typ
Max
Unit
Instantaneous Forward Voltage
(Note 2)
(iF = 8 A, TC = 125°C)
(iF = 8 A, TC = 25°C)
vF
1.5
2.7
1.8
3.2
V
Instantaneous Reverse Current
(Note 2)
(Rated DC Voltage, TC = 125°C)
(Rated DC Voltage, TC = 25°C)
iR
46
0.1
400
30
mA
Reverse Recovery Time
(IF = 0.5 A, Irr = 0.25 A, IR = 1 A)
(IF = 1 A, dIF/dt = −50 A/ms, VR = 30 V)
trr
−
−
30
50
ns
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(IF = 8 A, dIF/dt = −200 A/ms, TC = 25°C)
trr
IRM
Qrr
S
30
2.3
37
2
50
3
50
−
ns
A
nC
−
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(IF = 8 A, dIF/dt = −200 A/ms, TC = 125°C)
trr
IRM
Qrr
S
45
5.5
150
0.35
−
−
−
−
ns
A
nC
−
(IF = 8 A, dIF/dt = 120 A/ms, TC = 25°C)
tfr
VFP
−
−
200
6
ns
V
Forward Recovery Time
Forward Voltage Time
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
ORDERING INFORMATION
Package
Shipping†
NHPV08S600G
TO−220AC
(Pb−Free / Halide−Free)
50 Units / Rail
NHPJ08S600G
TO−220FP
(Pb−Free / Halide−Free)
50 Units / Rail
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
NHPV08S600G, NHPJ08S600G
TYPICAL CHARACTERISTICS
IR, INSTANTANEOUS REVERSE
CURRENT (mA)
1000
TA = 125°C
TA = 150°C
10
TA = 25°C
1
0.1
TA = 150°C
10
TA = 125°C
1
0.1
TA = 25°C
0.01
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.001
4.0
100
200
300
400
500
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Figure 1. Typical Instantaneous Forward
Characteristics
Figure 2. Typical Reverse Characteristics
C, JUNCTION CAPACITANCE (pF)
TJ = 25°C
1
10
100
1000
15
Square
Wave
10
5
0
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
Figure 3. Typical Junction Capacitance
Figure 4. Current Derating TO−220AC
30
IPK/IAV = 20
IPK/IAV = 10
25
IPK/IAV = 5
20
Square
Wave
15
DC
10
5
0
TJ = 150°C
0
2
4
6
8
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure 5. Forward Power Dissipation
http://onsemi.com
3
600
RqJC = 1.5°C/W
DC
VR, REVERSE VOLTAGE (V)
PF(AV), AVERAGE FORWARD
POWER DISSIPATION (W)
0.1
0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
100
10
100
IF(AV), AVERAGE FORWARD CURRENT (A)
iF, INSTANTANEOUS FORWARD
CURRENT (A)
100
10
NHPV08S600G, NHPJ08S600G
PACKAGE DIMENSIONS
TO−220 TWO−LEAD
CASE 221B−04
ISSUE E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
F
T
S
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
R
D
J
G
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.161
0.190
0.210
0.110
0.130
0.014
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
0.89
3.61
4.09
4.83
5.33
2.79
3.30
0.36
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
TO−220 FULLPAK, 2−LEAD
CASE 221AG
ISSUE O
A
E
B
P
E/2
0.14
M
B A
M
SEATING
PLANE
A
H1
A1
4
Q
D
C
NOTE 3
1 2 3
L
L1
3X
3X
b2
c
b
0.25
M
B A
M
C
A2
e
e1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR UNCONTROLLED IN THIS AREA.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH
AND GATE PROTRUSIONS. MOLD FLASH AND GATE
PROTRUSIONS NOT TO EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE TO BE MEASURED AT OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSION b2 DOES NOT INCLUDE DAMBAR
PROTRUSION. LEAD WIDTH INCLUDING PROTRUSION
SHALL NOT EXCEED 2.00.
MILLIMETERS
DIM MIN
MAX
A
4.30
4.70
A1
2.50
2.90
A2
2.50
2.70
b
0.54
0.84
b2
1.10
1.40
c
0.49
0.79
D
14.22
15.88
E
9.65
10.67
e
2.54 BSC
e1
5.08 BSC
H1
5.97
6.48
L
12.70
14.73
L1
--2.80
P
3.00
3.40
Q
2.80
3.20
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NHPV08S600/D
Similar pages