UTC MB6FU Schottky bridge rectifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MB6FU
SCHOTTKY BRIDGE
1.0A SCHOTTKY BRIDGE
RECTIFIER

DESCRIPTION
The UTC MB6FU is a schottky bridge rectifiers, it uses UTC’s
advanced technology to provide customers with high surge current
capability, etc.
The UTC MB6FU is suitable for General purpose use in ac-to-dc
bridge full wave rectification for LED bulb and telecommunication.

-
+
MBF
FEATURES
* Low leakage
* Surge overload rating-30A peak
* Designed for Surface Mount Application

SYMBOL

ORDERING INFORMATION
Ordering Number
MB6FUL-MBF-R

Package
MBF
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R202-039.A
MB6FU

SCHOTTKY BRIDGE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise noted)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load,derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VDC
600
V
RMS Voltage
VRMS
420
V
Repetitive Peak Reverse Voltage
VRRM
600
V
Average Forward Rectified Current
TA=40°C (Note 2)
IO
1.0
A
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
IFSM
35
A
Superimposed on Rated Load
Operating Junction Temperature Range
TJ
-55~+125
°C
Storage Temperature Range
TSTG
-55~+150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Mounted on glass epoxy pc board with 1.3mm2 solder pad.

THERMAL DATA
PARAMETER
SYMBOL
Junction to Ambient
θJA
Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.

RATINGS
60
UNIT
°С/W
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
Instantaneous Forward Voltage
DC Reverse Current at Rated DC Blocking
Voltage
SYMBOL
VF
IR
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
IF=1.0A
TJ=25°C
TJ=125°C
MIN
TYP MAX UNIT
1.1
V
5.0
μA
500 μA
2 of 4
QW-R202-039.A
MB6FU

SCHOTTKY BRIDGE
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R202-039.A
MB6FU
SCHOTTKY BRIDGE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R202-039.A
Similar pages