ETC2 AB6H-M1 A6 series miniature switches and pilot devices 16mm Datasheet

Switches & Pilot Devices
16mm A6
A6 Series — Miniature Switches and Pilot Devices: 16mm
Switches & Pilot Lights
Key features:
•
•
•
•
•
•
•
16mm (5/8”) mounting hole
LED illumination
Compact design saves space
Momentary, Maintained, Selectors, and E-Stops
Gold-clad Silver contacts for reliable low level switching
Snap action contacts
IP40 (dustproof) or IP65 (oiltight) versions
Degree of Protection
IP40: Dustproof
IP65 Watertight/Oiltight
Contact Configuration
SPDT, DPDT
Maximum Voltage
250V AC/DC
Thermal Current
3A
Minimum Applicable Load
5V AC/DC, 1mA
Contact Material
Gold-clad silver
Terminal Style
.110” Solder/ Quick Connect
Operating Temperature
-25º to +55ºC (no freezing)
Operating Humidity
45 to 85% RH
Contact Resistance
50mΩ maximum (initial value)
Insulation Resistance
100MΩ minimum (500V DC megger)
Vibration Resistance
10 to 55Hz, amplitude 1.5mm p-p
Shock Resistance
Damage limits: 500m/sec2 (approx. 50G) Operating extremes: 200m/sec2 (approx. 20G)
Electrical Life
100,000 operations minimum (at full rated load)
Mechanical Life
Maintained: 100,000 operations minimum
Momentary: 1,000,000 operations minimum
Selector/Keylock: 250,000 operations minimum
Dielectric Strength
Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles;
1,000V AC, 1 minute between terminals of the same pole;
1,500V AC, 1 minute between contact and lamp terminals.
Illumination Unit: 2,000V AC, 1 min. between live part/ground
Soldering Temperature
20W/5 seconds or 260ºC/3 seconds
Operating Voltage
DC
Rated Voltage/Current
24V
120V
240V
—
1.0A
0.5A
Inductive
—
0.7A
0.5A
Resistive
1.0A
0.2A
—
Inductive
0.7A
0.1A
—
Terminal Blocks
AC (50/60Hz)
Resistive
Timers
Contact Ratings
CSA Certified
File No. LR21451
Relays & Sockets
LED Lamp
Ratings
R
Display Lights
Specifications
UL Recognized
File No.E55996
5V DC ±5%
6V AC/DC (±10%)
12V AC/DC (±10%)
24V AC/DC (±10%)
8mA
AC: A, R, W, Y: 8mA
G, S: 7mA
DC: A, R, W, Y: 6mA
G, S: 5mA
AC: 9mA
DC: 8mA
AC: 9mA
DC: 8mA
Circuit Breakers
1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms.
2. LED lamp contains a built-in current limiting resistor and a protection diode.
3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
USA: 800-262-IDEC
Canada: 888-317-IDEC
457
Switches & Pilot Devices
16mm A6
jButton Color Code
Part Number
Style
Contact
Momentary
Dustproof (IP40)
Maintained (Latching)
Oiltight (IP65)
Dustproof (IP40)
Oiltight (IP65)
Round 18mm
Standard Button
SPDT
DPDT
AB6M-M1-j
AB6M-M2-j
AB6M-M1P-j
AB6M-M2P-j
AB6M-A1-j
AB6M-A2-j
AB6M-A1P-j
AB6M-A2P-j
Color
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Square 18mm
SPDT
DPDT
AB6Q-M1-j
AB6Q-M2-j
AB6Q-M1P-j
AB6Q-M2P-j
AB6Q-A1-j
AB6Q-A2-j
AB6Q-A1P-j
AB6Q-A2P-j
SPDT
DPDT
AB6H-M1-j
AB6H-M2-j
AB6H-M1P-j
AB6H-M2P-j
AB6H-A1-j
AB6H-A2-j
AB6H-A1P-j
AB6H-A2P-j
Rectangular 18mm x 24mm
Relays & Sockets
Display Lights
Switches & Pilot Lights
AB6 Non-Illuminated Pushbuttons (Assembled)
Non-Illuminated Pushbuttons
Round 23.5mm
Oversize Button
SPDT
DPDT
–
AB6M-M1P-Mj
AB6M-M2P-Mj
AB6M-A1P-Mj
AB6M-A2P-Mj
–
Square 23.5mm
SPDT
DPDT
–
AB6Q-M1P-Qj
AB6Q-M2P-Qj
–
AB6Q-A1P-Qj
AB6Q-A2P-Qj
SPDT
DPDT
–
AB6Q-M1P-Hj
AB6Q-M2P-Hj
–
AB6Q-A1P-Hj
AB6Q-A2P-Hj
1. In place of j, specify Button Color Code
from the table at right.
2. To order as sub-assembled, see page 459.
3. For accessories, see page 466.
4. For dimensions, see page 468.
Timers
Rectangular 17.5 X 23.5mm
AB6-V Pushlock Turn Reset
Terminal Blocks
Shape
Operation
Contact
Part Number
Dustproof (IP40)
Remarks
Oiltight (IP65)
23.5mm Round Mushroom
Pushlock Turn Reset
SPDT
DPDT
AB6M-V1-R
AB6M-V2-R
AB6M-V1P-R
AB6M-V2P-R
Buzzer
Buzzer Ratings
Circuit Breakers
Style
Shape
Voltage
Part Number
12V DC
UZ6-11
24V DC
UZ6-12
Round (18mm)
458
1. Button available in red only.
2. Replacement button: order AB6M-V-R
Frequency
2 khz ± 500 HZ
Amplitude
80db @ 0.1m (at rated voltage)
Operating Voltage
6V AC/DC or 12 - 24V AC/DC ± 10%
Adjustable Cycle
55 to 600 cycles per minute
Current Draw
DC: 7mA, AC: 20mA
Life
1000 hrs. minimum
Insulation Voltage
60V AC/DC
Operating Temperature
-20 to 55 C (no freezing), 45 to 85% rh
www.idec.com
Switches & Pilot Devices
16mm A6
AB6 Non-Illuminated Pushbuttons (Sub-Assembled)
+
Button
=
Switches & Pilot Lights
Operator
Completed Unit
Operators
Style
Contact
Round
Square
Rectangular
Momentary
AB6M-M100
AB6Q-M100
AB6H-M100
Maintained
AB6M-A100
AB6Q-A100
AB6H-A100
Momentary
AB6M-M200
AB6Q-M200
AB6H-M200
Maintained
AB6M-A200
AB6Q-A200
AB6H-A200
Display Lights
Non-Illuminated Pushbuttons
Part Number
Operator
SPDT
DPDT
Oversize rectangular button uses square operator.
jButton Color Code
Part Number
Description
Relays & Sockets
Buttons
Button
Dustproof (IP40)
Oiltight (IP65)
AB6M-BK1-j
AB6M-BK2-j
Round
Square
AB6Q-BK2-j
AB6H-BK1-j
AB6H-BK2-j
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Timers
AB6Q-BK1-j
Color
Rectangular
Round Oversize
AB6M-BK2-Mj
–
AB6Q-BK2-Qj
–
AB6Q-BK2-Hj
Terminal Blocks
–
Square Oversize
Rectangular Oversize
Circuit Breakers
1. In place of j, specify Button Color Code from table.
2. Buttons which are rated IP65 include a waterproof rubber gasket.
3. For accessories, see page 466.
USA: 800-262-IDEC
Canada: 888-317-IDEC
459
Switches & Pilot Devices
16mm A6
Switches & Pilot Lights
AL6 Illuminated Pushbuttons (Assembled)
LED Illuminated Pushbuttons
Part Numbers
Description
Style
Momentary
Contact
Maintained (Latching)
Dustproof (IP40)
Oiltight (IP65)
Dustproof (IP40)
Oiltight (IP65)
SPDT
DPDT
AL6M-M1l-k
AL6M-M2l-k
AL6M-M1lP-k
AL6M-M2lP-k
AL6M-A1l-k
AL6M-A2l-k
AL6M-A1lP-k
AL6M-A2lP-k
SPDT
DPDT
AL6Q-M1l-k
AL6Q-M2l-k
AL6Q-M1lP-k
AL6Q-M2lP-k
AL6Q-A1l-k
AL6Q-A2l-k
AL6Q-A1lP-k
AL6Q-A2lP-k
SPDT
DPDT
AL6H-M1l-k
AL6H-M2l-k
AL6H-M1lP-k
AL6H-M2lP-k
AL6H-A1l-k
AL6H-A2l-k
AL6H-A1lP-k
AL6H-A2lP-k
Round (18mm lens)
Display Lights
Square (18mm lens)
Standard
Lens
Relays & Sockets
Rectangular (18mm x
24mm lens)
Round (24mm lens)
SPDT
DPDT
–
AL6M-M1lP-Mk
AL6M-M2lP-Mk
–
AL6M-A1lP-Mk
AL6M-A2lP-Mk
SPDT
DPDT
–
AL6Q-M1lP-Qk
AL6Q-M2lP-Qk
–
AL6Q-A1lP-Qk
AL6Q-A2lP-Qk
SPDT
DPDT
–
AL6Q-M1lP-Hk
AL6Q-M2lP-Hk
–
AL6Q-A1lP-Hk
AL6Q-A2lP-Hk
Oversize
Lens
Rectangular (18mm x
24mm lens)
Terminal Blocks
Timers
Square (24mm lens)
1. In place of k, specify Lens/LED Color Code from table below.
2. In place of l, specify Voltage Code from table below.
3. Lamps also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage/lamp codes (ie AL6M-M13-k uses 12V AC/DC LED).
4. LED lamp is included in unit and contains a current-limiting resistor and a protection diode. (External resistor not required.)
5. To order as sub-assembled, see page 461.
6. For accessories, see page 466.
7. For dimensions, see page 468.
8. Light independent of switch position.
Circuit Breakers
kLens/LED Color Code
lVoltage Code
Voltage
Code
Color
Code
Amber
A
5V DC
1
Green
G
6V AC/DC
2
Red
R
12V AC/DC
3
Blue
S
24V AC/DC
4
Warm White
W
Cool White
JW
Yellow
460
Y
www.idec.com
Switches & Pilot Devices
16mm A6
AL6 Illuminated Pushbuttons (Sub-Assembled)
+
LED Lamp
+
Lens
=
Switches & Pilot Lights
Operator
Completed Unit
Operators
Style
Contact
Round
Square
Rectangular
Momentary
AL6M-M100
AL6Q-M100
AL6H-M100
Maintained
AL6M-A100
AL6Q-A100
AL6H-A100
Momentary
AL6M-M200
AL6Q-M200
AL6H-M200
Maintained
AL6M-A200
AL6Q-A200
AL6H-A200
Display Lights
AL6 Illuminated Pushbuttons
Part Number
Operator
SPDT
DPDT
Oversize rectangular button uses square operator.
Unit
Relays & Sockets
Lenses
Part Number
Degree of Protection
Dustproof (IP40)
Size
Standard
Oiltight (IP65)
Standard
Oversize
AL6M-LK1-k
AL6M-LK2-k
AL6M-LK2-M k
AL6Q-LK1-k
AL6Q-LK2-k
AL6Q-LK2-Q k
AL6H-LK1-k
AL6H-LK2-k
AL6Q-LK2-H k
Round
Timers
Square
Rectangular
Terminal Blocks
1. In place of k, specify Lens Color Code from table below.
2. Lenses which are rated IP65 include a waterproof rubber gasket.
3. For accessories, see page 466.
kLens/LED Color Code
LED Lamps
Color
Code
Amber
A
5V DC
LATD-5 k
Green
G
6V AC/DC
LATD-6 k
Red
R
12V AC/DC
LATD-1 k
Blue
S
24V AC/DC
LATD-2 k
Warm White
W
Cool White
JW
Rated Voltage
Part Number
Circuit Breakers
Yellow
Appearance
1. In place of k, specify LED Color Code from table at left.
Y
USA: 800-262-IDEC
Canada: 888-317-IDEC
461
Switches & Pilot Devices
16mm A6
Switches & Pilot Lights
AL6 Pilot Lights (Assembled)
LED Pilot Lights
Description
Part Number
Dustproof (IP40)
Oiltight (IP65)
Round (18mm Lens)
AL6M-Pl-k
AL6M-PlP-k
AL6Q-Pl-k
AL6Q-PlP-k
AL6H-Pl-k
AL6H-PlP-k
Display Lights
Square (18mm Lens)
Relays & Sockets
Rectangular (18mm x 24mm Lens)
1. In place of k, specify Lens Color Code from table below.
2. In place of l, specify Voltage Code from table below.
3. LEDs also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage codes (ie AL6M-P3-k uses
12V AC/DC LED).
4. LED is included and contains built-in current limiting resistor and reverse polarity protection diode. (no
external resistor required)
5. To order sub-assembled, see page 463.
6. For accessories, see page 466.
7. For dimensions, see page 468.
8. For one piece pilot lights and/or dome lens pilot lights, see AP series miniature pilot lights.
Timers
kLens/LED Color Code
lVoltage Code
Voltage
Code
Color
Code
Amber
A
5V DC
1
Green
G
6V AC/DC
2
Red
R
12V AC/DC
3
Blue
S
24V AC/DC
4
Warm White
W
Cool White
JW
Y
Circuit Breakers
Terminal Blocks
Yellow
462
www.idec.com
Switches & Pilot Devices
16mm A6
AL6 Pilot Lights (Sub-Assembled)
+
LED Lamp
+
Lens
=
Switches & Pilot Lights
Operator
Completed Unit
Operators
Part Number
Style
Round
Square
Rectangular
AL6M-P00
AL6Q-P00
Display Lights
AL6 Pilot Lights
AL6H-P00
Lenses
Part Number
Degree of Protection
Oiltight IP65
AL6M-LK3-k
AL6Q-LK1-k
AL6Q-LK3-k
AL6H-LK1-k
AL6H-LK3-k
Relays & Sockets
Dustproof IP40
AL6M-LK1-k
Round
Square
Timers
Rectangular
kLens/LED Color Code
LED Lamps
Code
Rated Voltage
Part Number
A
5V DC
LATD-5 k
Green
G
6V AC/DC
LATD-6 k
Red
R
12V AC/DC
LATD-1 k
Blue
S
24V AC/DC
LATD-2 k
Warm White
W
Cool White
JW
Appearance
Circuit Breakers
Color
Amber
Yellow
Terminal Blocks
1. In place of k, specify Lens Color Code from table below.
2. Lenses which are rated IP65 include a waterproof rubber gasket.
3. For accessories, see page 466.
1. In place of k, specify LED Color Code from table at left.
Y
USA: 800-262-IDEC
Canada: 888-317-IDEC
463
Switches & Pilot Devices
16mm A6
Square Keylock
Timers
Rectangular Selector
3-Position 45º
2-Position 90º
Display Lights
Square Selector
3-Position 45º
Round Selector
Function
2-Position 90º
Style
Round Keylock
Relays & Sockets
Contact Operations
AS6 Selector Switches and Keylock Switches (2 & 3 Position)
2-Position 90º
Switches & Pilot Lights
AS6 Selector and Keylock Switches
R
AS6M-2Y2P
AS6M-2KT2Pj
Spring Return
Right
L
R
AS6M-21Y2P
AS6M-21KT2PB
Maintained
L
R
AS6M-3Y2P
AS6M-3KT2Pj
Terminal Blocks
3-Position 45º
C
Spring Return
Right gCenter
L
Spring Return
Left gCenter
L
2-Way
ReturngCenter
C
R
AS6M-31Y2P
AS6M-31KT2Pj
R
AS6M-32Y2P
AS6M-32KT2Pj
L
R
AS6M-33Y2P
AS6M-33KT2PD
L
R
AS6Q-2Y2P
AS6Q-2KT2Pj
464
(for all selectors)
Contents
Operator Position
& Contact Operation
Left
Right
Contact Contact
NO NC NO NC
Left
C
2-pos. (DPDT)
C
Left
Right
Contact Contact
NO NC NO NC
Right
C
Maintained
C
C
L
C
Maintained
L
Spring Return
RightgCenter
L
Spring Return
Left gCenter
L
2-Way
ReturngCenter
Maintained
Spring Return
Right
Spring Return
Right gCenter
R
AS6Q-21Y2P
AS6Q-3Y2P
AS6Q-3KT2Pj
R
AS6Q-31Y2P
AS6Q-31KT2Pj
R
AS6Q-32Y2P
AS6Q-32KT2Pj
L
R
AS6Q-33Y2P
AS6Q-33KT2PD
L
R
AS6H-2Y2P
AS6H-2KT2Pj
L
R
AS6H-21Y2P
AS6H-21KT2PB
C
C
R
C
Spring Return
LeftgCenter
L
2-Way
ReturngCenter
L
C
Left
Right
Contact Contact
NO NC NO NC
Right
C
jKey Retention Codes
C
L
C
C
C
L
Center
AS6Q-21KT2PB
R
C
Left
Right
Contact Contact
NO NC NO NC
3-pos. (DPDT)
Spring Return to
Right
C
Left
Right
Contact Contact
NO NC NO NC
Left
C
R
C
AS6H-3Y2P
AS6H-31Y2P
AS6H-3KT2Pj
R
AS6H-32Y2P
AS6H-32KT2Pj
R
AS6H-33Y2P
AS6H-33KT2PD
C
Code
All models are IP65 and DPDT.
In place of j, specify Key Retention Code. See table on right.
Available as assembled units only.
For accessories, see page 466.
For dimensions, see page 468.
www.idec.com
Description
A
Key not retained in any position
(removable in all positions)
B
Key retained in right position only
C
Key retained in left position only
D
Key retained in left and right
(3 position only)
E
Key retained in center only
(3 position only)
G
Key retained right and center
(3 position only)
H
Key retained left and center
(3 position only)
AS6H-31KT2Pj
Circuit Breakers
1.
2.
3.
4.
5.
Key
L
Maintained
Maintained
Rectangular Keylock
Knob
Key cannot be removed in a spring return
position.
Switches & Pilot Devices
16mm A6
Switches & Pilot Lights
Switch Engraving Order Form – A6 Series
Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved.
To insure engraving accuracy, fax it to your IDEC representative or Distributor.
Your Company:
Telephone:
Name:
Fax:
Address:
Email:
PO:
Part Number to be Engraved:
Display Lights
Please check one of the boxes below to indicate your choice of engraving options:
Rectangular
Switch
Round
Switch
Square
Switch
Letter
Height
Max. Characters
Per Line
# of Lines
Letter
Height
Max. Characters
Per Line
1
5/32
6
1
5/32
5
# of
Lines
Letter
Height
Max. Characters
Per Line
5/32
3
1/8
3
1
5/32
6
2
3
5/32
5
1/8
6
2
5/32
Custom*
1/8
6
3
1/8
Custom*
4
3/32
Custom*
2
1/8
6
1/8
6
4
N/A
3
4
N/A
Relays & Sockets
# of
Lines
*Engraving is possible, but character size will be
smaller than standard sizes.
Timers
1. Engraving is done on the button itself for non-Illuminated pushbuttons and on marking plate for illuminated pushbuttons and pilot lights.
2. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters.
Sample Letter Sizes
Enter text to be engraved:
1/8 Letters:
Line 1:
5/32 Letters:
Terminal Blocks
Line 2:
Line 3:
Line 4:
Circuit Breakers
For IDEC Internal Use Only:
Work Order #:
USA: 800-262-IDEC
Canada: 888-317-IDEC
465
Switches & Pilot Devices
16mm A6
Display Lights
Switches & Pilot Lights
Accessories
Appearance
Description
Locking Ring
Wrench
Made of metal. Used for tightening plastic locking ring during
installation. Tightening torque should not exceed 3kgf-cm
Part Number
Ø 5/8” (16mm) units
MT-001
Ø 31/64” (12mm) AP2M units
MT-002
Ø 13/32” (10mm) AP1M units
MT-003
Lens Removal Tool
Made of metal. Used for removing lens or button from the
housing
All pushbuttons and pilot lights
MT-101
Lamp Holder Tool
Made of rubber. Used for removing and replacing LED lamps
in illuminated units
All illuminated pushbuttons and pilot
lights
OR-77
Prevents inadvertent switch operation. IP40 dust-tight.
90 degrees opening maintained
Round/Square
AL-K6
Rectangular
AL-KH6
Prevents inadvertent switch operation. IP65 oiltight
180 degrees opening, spring return
Round/Square
AL-K6SP
Rectangular
AL-KH6SP
Made of translucent nylon. Fits over and shields the terminals
All 5/8” (16mm) units
AL-V6
All round units
AL-D6
All square units
AL-DQ6
All rectangular units
AL-DH6
Switch Guard
Terminal Cover
Relays & Sockets
Used With
Dust Cover
Fits over the lens or button to provide extra protection from
dust (not applicable for oversize lenses or buttons).
Plug-on terminal adaptor with solder terminals
Adaptor Socket
Mounting Hole Plug
Plug-on terminal adaptor with PCB terminals
AL-C6
All 5/8” (16mm) units
Fills unused panel cutouts. Made of nitrile rubber. Push-in
installation from front of panel. IP65 (oiltight).
Rubber
AL-B6
Fills unused panel cutouts. Made of aluminum. Screw-on
locking ring from inside of panel. IP65 (oiltight).
Aluminum
AL-BM6
Timers
Round Mounting Hole Plug
Terminal Blocks
Plastic (Applicable for flush mount
switches only)
LA9Z-BS7
5V DC
LATD-5 k
6V AC/DC
LATD-6 k
12V AC/DC
LATD-1 k
24V AC/DC
LATD-2 k
Rectangular Mounting Hole Plug
LED with built in current limiting resistor (with all
illuminated assemblies).
LA9Z-BS8
Replacement
Locking Ring
Fastens operators to panel (included with
all operators).
All switches & pilot lights
HA9Z-LN
Anti-Rotation Ring
Prevents rotation of switches in panel
(included with all operators).
All switches & pilot lights
AL6-LP
Round standard
AL6M-W
Square standard
AL6Q-W
Replacement
Engraving Inserts
Circuit Breakers
LA9Z-BS6
Square Mounting Hole Plug
Replacement
LED Lamps
AL-C6V
Replacement Keys
Engraving plates to allow legends underneath translucent
lenses (included with all lenses).
Pair of keys (#132).
All key switches use same standard key.
1. In place of k specify color code. A=Amber, G=Green, Y=Yellow, R=Red, S=Blue, W=Warm White, JW=Cool White.
2. LEDs include built-in current limiting resistor and reverse polarity protection diode.
466
www.idec.com
Rectangular standard
AL6H-W
Round oversize
AL6M-MW
Square/rectangular oversize
AL6Q-QW
All key selectors
AS6-SK
Switches & Pilot Devices
Appearance
16mm A6
Used With
Part Number
ø24mm round, metal (aluminum color), panel cut-out ø20.2mm
Pushbuttons, pilot lights, illuminated
pushbutton, selector switches, key
selector switches and illuminated selector switches.
LA9Z-SM61
ø24mm round, plastic (black), square panel cut-out ø20.2mm
Switches & Pilot Lights
Description
LA9Z-S61B
A6 Switch
Flush Bezel
+
24mm square, plastic (black), panel cut-out 20.2 x 20.2mm
LA9Z-S71B
Switch Guard
w/ Flush Bezel
(spring return)
Display Lights
Flush Bezel
24 x 30mm rectangular, plastic (black), rectangular
panel cut-out ø20.2 x 26.2mm
LA9Z-S81B
=
Rectangular, plastic (black)
LA9Z-KS8
Flush Switch
Relays & Sockets
Schematics — A Series: 5/8” (16mm)
Terminal Arrangement (Top View)
Non-illuminated Pushbuttons and
Selector Switches
Illuminated Pushbuttons
(TOP)
(TOP)
(TOP)
(TOP)
(TOP)
NC1
NC1 NC2
NC1
NC1 NC2
NO1
NO1 NO2
NO1
NO1 NO2
C1
Lamp
Terminal (–)
SPDT Contact
(Single-pole/Double Throw)
Lamp
Terminal (+)
C1
C2
Lamp
Terminal (–)
DPDT Contact
(Double-pole/Double Throw)
C1
C1
SPDT Contact
(Single-pole/Double
Throw)
C2
Lamp
Terminal (+)
Lamp
Terminal (–)
Timers
Lamp
Terminal (+)
Pilot Lights
DPDT Contact
(Double-pole/Double
Throw)
Terminal Blocks
IDEC’s Superbright LED Internal Circuits
LATD-1,-2,-6 (GS)
LATD-5 (ARWY)
LED Chip
Protective Diode
Zener Diode
LATD-1,-2,-6 (ARWY)
LATD-5 (GS)
Circuit Breakers
USA: 800-262-IDEC
Canada: 888-317-IDEC
467
Switches & Pilot Devices
16mm A6
Pushbuttons, Ø 5/8” (16mm)
Rubber Gasket
Terminal Width 2.8×0.5t Anti-rotation Ring
2.5
3
Locking Ring
Panel Thickness 0.5 to 6
Round
Square
(TOP)
ø18
(TOP)
18
5
Rectangular
(TOP)
5
Switches & Pilot Lights
Dimensions (mm)
1
0.6
9
22
24
Oversize Lens
Rubber Gasket
Anti-rotation Ring
Teminal Width 2.8×0.5t
Locking Ring
2.5
3
Panel Thickness 0.5 to 6
Rectangular
(TOP)
6
1
8
0.6
9
22
Round
(TOP)
c 23.5
ø23.5
Square
(TOP)
17.5
6
Relays & Sockets
5.7
18
9
5 5
Display Lights
8
23.5
0.6
9
15.5
0.6
15.5
12.5
Selector Switches, Ø 5/8” (16mm)
Terminal Width 2.8×0.5t
2.5
3
Rubber Gasket
Anti-rotation Ring
Panel Thickness 0.5 to 6
Rectangular
(TOP)
Locking Ring
Square
(TOP)
Round
(TOP)
8
5
18
5
ø1
8
Timers
1
8
22
15.5
c18
24
Key Selector Switches, Ø 5/8” (16mm)
2.5
Right Contact
3
Rubber Gasket
Terminal Width 2.8×0.5t
2.5
5
3
Anti-rotation Ring
Panel Thickness 0.5 to 6
Locking Ring
Rectangular
(TOP)
Square
(TOP)
Round
(TOP)
NC
18
5
Terminal Blocks
TOP
Left Contact
NO
C
Circuit Breakers
1
8
468
22
26
24
www.idec.com
18
ø18
Switches & Pilot Devices
16mm A6
Switch Guard, Ø 5/8” (16mm)
26.5 minimum
(45.5 minimum for 180° opening type)
13
23.5
Panel Thickness
0.5 to 5
32
R2
33
24
10.5
26.5 minimum
(45.5 minimum for 180° opening type)
13
10.5
23.5
18
Rubber Gasket
28
14
28
(180° opening type)
R2
24
Panel Thickness
0.5 to 5
Waterproof Gasket
for Switch Guard
45.5 min.
2
14
19 min.
Rubber
Gasket
0.4
28
Relays & Sockets
45.5 min.
23.5
10.5 13
33
18
Display Lights
25 minimum
34
23.5
10.5 13
2
Rubber Gasket
14
(90°/110° opening type)
19 minimum
Switches & Pilot Lights
Panel Thickness
0.5 to 5
34
25 min.
Flush Bezel
Flush Bezel with Switch
Panel Thickness 0.5 to 5
14.8
8
8
ø2
4
18
24
Selector Switches
Illuminated &
Non-illuminated
2
20
21.4
2
Key
2
17
26
27.4
8.5
Terminal Blocks
2
18.1
2
24
30
23
Lever
24
18
8.5
Rectangular
29
2
20
21.4
8.5
1
8
Timers
Square
ø1
ø2
4
ø1
0.9
0.8
9.8
Plastic
Metal
ø 20
22.6
Round
Flush
Bezel
Gasket
ø21.4
Mounting
Bracket
9.3
2
Flush Bezel Mounting Hole Layout
Square
+
– 0 0.2
.1
Round
26.2 +0.2
– 0.1
24 min.∗
24 min.∗
24 min.∗
+0.2
20.2 -0.1
Circuit Breakers
ø2
0.
2
20.2
Rectangular
+0.2
– 0.1
24 min.∗
24 min.∗
USA: 800-262-IDEC
30 min.∗
Canada: 888-317-IDEC
469
Switches & Pilot Devices
16mm A6
Terminal Sockets
Switches & Pilot Lights
3
3
(TOP)
5 5
5 5
NC1 NC2
NO1 NO2
16.2
7.5
6
16.2
6
Solder Terminal Type
(AL-C6)
3.8
6
6
Lamp
Terminal (+)
PC Board
Mounting Hole Layout
(Bottom View)
PC Board Terminal Type
(AL-C6V)
Dust Covers
C1
C2
Lamp
Terminal (–)
Terminal Arrangement
(Bottom View)
Panel Cut-Outs For Units w/Dust Cover
AL-D6, Round
AL-DQ6, Square
ø24
AL-DH6, Rectangular
Round/Square
30
c 24
ø16.2
Rectangular
+0.2
0
ø16.2
+0.2
0
13
0.3
0.3
Waterproof Gasket
for Dust Cover
Waterproof Gasket
for Dust Cover
Marking Plates
Style
Round—AL6M-W
Square—AL6Q-W
Pushbuttons with Oversize Lens
Rectangular—AL6H-W
Style
Round—AL6M-MW
a1
øOD
øa
Engraving
Area
Square/Rectangular—AL6Q-QW
øOD
❏ OD
❏a
Dimensions
ca
Marking
Area
Marking
Area
a2
0.8
øa
0.8
0.8
Timers
Dimensions
Marking
Area
Engraving
Area
OD1
øOD
OD2
Ø 5/8” (16mm)
Terminal Blocks
24 min.
7.5
7.5
13
13
7.5
Waterproof Gasket
for Dust Cover
Pushbuttons with Standard Size Lens
Circuit Breakers
30 min.
24 min.
0.3
Relays & Sockets
24 min.
24
Display Lights
+0.3
0 Holes
2.4
2.5
8-1.6
2.5
Terminal 1.5×0.3t
33.5
TOP
33.5
Outside (OD)
(13.8mm)
(13.8mm)
(OD1 x OD2) 13.8 x
19.8mm
Marking Area
(a)
(12mm)
(12mm)
(a1xa2) 12 x 18mm
Outside (OD)
Ø 0.491” (12.6mm)
0.491” (12.6mm)
Marking Area
(a)
Ø 0.429” (11mm)
0.429” (11mm)
Engraving must be made on the engraving area within 0.02” (0.5mm) deep.
Replacing & and Marking Plate
Removal
Remove the lens holder assembly (lens, marking plate and holder) from the operator by holding the color lens recesses with the lens removal tool (Part No.MT-101)
and pulling out. Remove marking plate by pushing the color lens from the rear to
disengage the latches. Marking plate must be engraved on the side as shown in
the figure on the right.
Ø 5/8” (16mm)
Installation
For illuminated pushbuttons:
1. Insert marking plate inside lens in correct direction
2. Press color lens on to lens holder to engage latches.
3. Insert lens holder into housing in correct direction.
Do not loosen spring on illuminated pushbutton units (except on pilot light units). The
marking plate must be engraved on the front side as shown above.
Fitting Grooves
Grooves
Engraving
Surface
Color Lens
470
Marking Plate
Lens Holder
www.idec.com
Similar pages