engineered to light up your design www.vcclite.com 1.800.522.5546 T-1 Resistored LED Lamps Description and Features These T-1 LED lamps contain an integral resistor in series with the emitter chip to allow their direct application into 5 and 12 volt circuits. No external current limiting resistor is required. These lamps allow for savings in both component and assembly cost. These LEDs are compatible with all conventional soldering techniques. All dimensions in inches. Ø.126 Ø.110 .181 .040 .020 S Q. TYP. 1.060 MIN. .060 ANODE .100 Electro-Optical Characteristics and Ratings P art Number E mitted C olor C MD264-3ID/HV5 C MD264-3G D/HV5 C MD264-3Y D/HV5 C MD264-3ID/HV12 C MD264-3G D/HV12 C MD264-3Y D/HV12 H.E . R ed G reen Y ellow H.E . R ed G reen Y ellow Lens C olor R ed G reen Y ellow R ed G reen Y ellow P ackage T ype Diffused Diffused Diffused Diffused Diffused Diffused F orward V oltage Luminous Intensity Min. (mcd) 9.0 8.0 6.0 9.0 8.0 6.0 T yp. (mcd) 13.0 12.0 9.0 13.0 12.0 9.0 Vf T yp. (V ) Max. (V ) Vf 5.0 5.0 5.0 12.0 12.0 12.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 20.0 5.0 5.0 5.0 12.0 12.0 12.0 Absolute Maximum Ratings V iewing Angle (degrees) 40 40 40 40 40 40 5.0V 12.0V Units Operating/Storage Temperature...........................-40 to +85..................-40 to + 85..........................°C Reverse Voltage (IR=100μA)....................................5.0..............................5.0...................................V Lead Solder Time @ 260°C........................................5.................................5........................second s D.C. Forward Voltage...............................................7.5.............................15.0..................................V CML and Chicago Miniature Lamp are registered trademarks of Visual Communications Company, LLC. P eak Wavelength (nm) 635 565 585 635 565 585