FED30TW SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 30Watts FEATURES APPLICATIONS • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, IEC60950-1, & EN50155 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP OVP OTP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Input Range Output Voltage VDC VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 Model Number FED30-24T3312W FED30-24T3315W FED30-24T0512W FED30-24T0515W FED30-48T3312W FED30-48T3315W FED30-48T0512W FED30-48T0515W Output Current @Full Load Min. Load (1) mA 500 / ±42 500 / ±33 400 / ±42 400 / ±33 500 / ±42 500 / ±33 400 / ±42 400 / ±33 Input Current @ No Load Efficiency Maximum Capacitor Load(2) mA % µF 105 105 105 105 55 55 55 55 87 87 88 88 87 87 88 88 15000 / ±340 15000 / ±220 8000 / ±340 8000 / ±220 15000 / ±340 15000 / ±220 8000 / ±340 8000 / ±220 Full Load mA 5000 / ±416 5000 / ±333 4000 / ±416 4000 / ±333 5000 / ±416 5000 / ±333 4000 / ±416 4000 / ±333 PART NUMBER STRUCTURE FED30 - 48 Series Name Input Voltage (VDC) 24: 9~36 48: 18~75 T 0515 Output Quantity Output Voltage Primary / Auxiliary (VDC) 3312: 3.3 / ±12 3315: 3.3 / ±15 0512: 5 / ±12 0515: 5 / ±15 T: Triple INPUT SPECIFICATIONS Parameter Input Range 4:1 N HS Remote Control Option Assembly Option : Positive logic N: Negative logic Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) Input reflected ripple current Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 100 ms, max. Input filter Remote ON/OFF Referred to –Vin pin 1 W - : No assembly HS: Heat-sink HC: Heat-sink with Clamp Min. Typ. Max. Unit 9 18 24 48 20 36 75 VDC 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48 Vin(nom) Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current www.PDUKE.com mAp-p 9 18 VDC 8 16 -0.5 VDC 30 30 50 100 Pi type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC +0.5 3 ms VDC mA mA 2014/04/30 FED30TW OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation Min. Load to Full Load Ripple and noise 20MHz bandwidth (Measured with a 0.1µF/50V MLCC) Temperature coefficient Transient response recovery time Over voltage protection Over load protection Short circuit protection 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals Case material Base material Potting material Weight MTBF 500VDC +1.0 +5.0 +1.0 +5.0 +1.0 +5.0 Unit % % % mVp-p +0.02 250 3.9 6.2 15 18 ℃ %/ µs VDC 150 % Continuous, automatics recovery Conditions Min. Input to Output Input (Output) to Case Typ. Max. 1600 1600 1 Unit VDC GΩ 1500 pF 360 400 440 kHz IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper FR4 PCB Epoxy(UL94 V-0) 30.5g (1.07oz) 1.177 x 106 hrs MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Max. 50 75 3.3Vout 5Vout 12Vout 15Vout % of Iout rated; Hiccup mode Isolation voltage Conditions Operating ambient temperature Min. Without derating With derating Typ. Max. -40 +50 +50 +85 105 115 -55 Vertical direction by natural convection (20LFM) Without heat-sink With heat-sink Thermal shock Vibration Relative humidity +125 12 10 Unit ℃ ℃ ℃ ℃ ℃/W MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Typ. -1.0 -5.0 -1.0 -5.0 -1.0 -5.0 -0.02 25% load step change Zener diode clamp GENERAL SPECIFICATIONS Parameter Maximum case temperature Over temperature protection Storage temperature range Thermal impedance Min. 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ±2kV ±1kV 10 Vr.m.s Level Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. 3. 4. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load The standard modules meet EN55022 Class A and Class B with external components.For more detail information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: 24VDC input Nippon chemi-con KY series, 330µF/50V The filter capacitor Power Mate suggest::48VDC input Nippon chemi-con KY series, 220µF/100V CAUTION: This power module is not internally fused. An input line fuse must always be used. 2 www.PDUKE.com 2014/04/30 FED30TW CHARACTERISTIC CURVE FED30-48T0515W Derating Curve FED30-48T0515W Derating Curve With Heat-sink FED30-48T0515W Efficiency vs. Input Voltage FED30-48T0515W Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 7 TRIPLE +Vin -Vin Ctrl +Aux -Aux Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2014/04/30