UTC MPSA92ML-T92-R High voltage transistor Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MPSA92M
PNP EPITAXIAL SILICON TRANSISTOR
HIGH VOLTAGE TRANSISTOR
„
FEATURES
* Collector-Emitter voltage: VCEO=-300V
* Collector Dissipation: PC(MAX)=625mW
* Low collector-Emitter saturation voltage
1
TO-92
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MPSA92ML-T92-B
MPSA92MG-T92-B
MPSA92ML-T92-K
MPSA92MG-T92-K
MPSA92ML-T92-R
MPSA92MG-T92-R
Note: Pin Assignment: E:EMITTER B:BASE C:COLLECTOR
MPSA92ML-T92-B
Package
TO-92
TO-92
TO-92
Pin Assignment
1
2
3
E
B
C
E
B
C
E
B
C
(1)Packing Type
(1) B: Tape Box, K: Bulk, R: Tape Reel
(2)Package Type
(2) T92: TO-92
(3)Lead Free
(3) Halogen Free, L: Lead Free
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Packing
Tape Box
Bulk
Tape Reel
1 of 2
QW-R201-020.Ba
MPSA92M
„
PNP EPITAXIAL SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TJ=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Base Voltage
VCBO
-300
V
Collector-Emitter Voltage
VCEO
-300
V
Emitter-Base Voltage
VEBO
-6
V
Collector Dissipation (TA=25°C)
PC
625
mW
Collector Current
IC
-800
mA
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified)
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector Cut-Off Current
Collector Cut-Off Current
Emitter Cut-Off Current
DC Current Gain (Note 1)
Collector-Emitter Saturation Voltage
SYMBOL
BVCBO
BVCEO
BVCES
BVEBO
ICBO
ICES
IEBO
hFE
VCE(SAT)
Base-Emitter Saturation Voltage
VBE(SAT)
Output Capacitance
COB
Note: 1. Pulse test: PW<300μs, Duty Cycle<2%
TEST CONDITIONS
IC=-100μA, IE=0
IC=-1mA, IB=0
IC=-100μA, VBE=0
IE=-100μA, IC=0
VCB=-300V, IE=0
VCB=-300V, VBE=0
VEB=-4V, IC=0
VCE=-10V, IC=-1mA
VCE=-10V, IC=-10mA
VCE=-10V, IC=-100mA
VCE=-10V, IC=-200mA
IC=-30mA, IB=-1mA
IC=-100mA, IB=-10mA
IC=-10mA, IB=-1mA
VCB=-20V, IE=0, f=1MHz
MIN
-300
-300
-300
-5
TYP
MAX
-100
-1
100
60
80
80
40
UNIT
V
V
V
V
nA
μA
nA
300
-0.20
-0.7
-0.75
8
V
V
pF
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R201-020.Ba
Similar pages