DB Lectro JQ104EAZ100B Suitable for automobile and lamp accessories application Datasheet

Présente / Presents:
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
NHG RELAYS
JQ104E
40 35
36
Features
Small size and light weight.
Heavy contact load (100A).
Contact arrangement Form A and C available.
Suitable for automobile and lamp accessories application.
PC board mounting and direct insert mounting available.
Ordering Information
2
3
4
DC12V
N
D
6
7
8
5
5
6
7
8
1Part number NVF7
2Contact arrangement A:1A
3Enclosure S: Sealed type Z: Dust cover
4Contact current 100A
5
0.197
1.12
0.044
Terminals b: PCB type a: plug in type
Coil rated voltage(V) DC:6,12,24
Contact material N:AgNi NIL: AgSnO2
Coil transient suppression: D: with diode.;
2D:with two diodes.;.
R: with resistance.;
DR: with diode and resistance;
NIL: standard
50
1.969
39.5
1.555
60.5max.
1
100 b
?7
Z
0.276
A
77.4max.
JQ104E
Contact Data
Contact Arrangement
Contact Material
1A SPSTNO
AgSnO 2 , AgNi
Contact Rating (resistive)
100A/14VDC
400W
75VDC
Max. Switching Power
Max. Switching Voltage
Contact Resistance or
Voltage drop
Operation life
44.4max.
Max. Switching Current:100A
30m
Electrical
Mechanical
Item 3.12 of IEC255-7
10 5
10 7
Item 3.30 of IEC255-7
Item 3.31 of IEC255-7
Coil Parameter
Dash
numbers
Coil voltage
VDC
Rated
012-10000
12
Coil
resistance
10%
Pick up
voltage
VDC(max)
(55%of rated
voltage)
80
6.6
Release voltage
VDC(min)
(10% of rated
voltage)
Coil power
consumption
W
Operate
Time
ms
Release
Time
ms
Max.
14.5
1.2
10
7
CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
2
JQ104E
Operation condition
Insulation Resistance1)
100M
min (at 500VDC)
Item 7 of IEC255-5
1)
Features
Dielectric Strength
Between contacts
Between contact and coil
50Hz 1000V
50Hz 2000V
Item 6 of IEC255-5
Item 6 of IEC255-5
Shock resistance
Vibration resistance
Terminals strength
Solderability
Ambient Temperature
Relative Humidity
Mass
147m/s2
11ms
10~40Hz double amplitude 1.5mm
8N 4N PC type
235
2
3 0.5s
-40~105
85% (at 40 )
46g
IEC68-2-27 Test Ea
IEC68-2-6 Test Fc
IEC68-2-21 Test Ua2
IEC68-2-20 Test Ta method 1
IEC68-2-3Test Ca
Note: 1). When testing, coil terminals should be connected, If coil transient suppression is installed in relay .
Qualification inspection:
Perform the qualification test as specified in the table
of IEC255-19-1 and minimum sample size 24.
Dimensions
Ordering Information
mm /inch
5
0.197
1.12
0.630max.
0.044
?7
1Part number NVF7
2Contact arrangement A:1A
3Enclosure S: Sealed type Z: Dust cover
4Contact current 100A
39.5
60.5max.
3.047max.
77.4max.
3.433max.
87.2max.
12.8
0.504
3
10
40 Max.
1.575max.
2.382max.
1.555
0.393 1.118
100A/14VDC
50
1.969
1.375
35
Contact Rating (resistive)
17
1A SPSTNO
AgSnO 2 , AgNi
0.669
Contact Data
Contact Arrangement
Contact Material
0.276
36 Max.
44.4max.
1.748max.
Cover
Dimensions
Electrical
Mechanical
1.575max.
0.791
0.031
0.268
0.024
Coil voltage
VDC
1.375max.
Dash
numbers
0.346 0.201
0.118
Mounting (Bottom view)
Wiring diagram (Bottom view)
NOTES 1).Dimensions are in millimeters.
2).Inch equivalents are given for general information only.
157
Ningbo Huaguan Relay Corporation LTD.
Similar pages