Honeywell HOA6299-003 Infrared assembly Datasheet

Infrared Assemblies
Through Beam Modules
HOA6299 Series
FEATURES
• Emitter and detector in
separate modules for
variable spacing
• Internal current limiting
resistor
• Direct TTL interface
• Buffer logic
• Fast response time
• Dust protective housing
APPLICATIONS
• Edge detection
• Position control
• Parts counting
• Mail sorting
The HOA6299 Series through beam infrared sensor modules operate
as a pair. The infrared emitting diode, HOA6299-002, and the detector,
HOA6299-003, are encased in black thermoplastic housings. Both the
emitter and detector modules employ 24 AWG wire leads which are
terminated with a Panduit CE156F24-2 connector for the HOA6299-002,
and a Panduit CE156F24-3 connector for the HOA6299-003.
The detector’s NPN output switches whenever an opaque object
blocks the beam path. The buffer logic provides a logic high when the
optical path is clear, and a logic low when the optical path is blocked.
The internal current limiting resistor in the emitter module eliminates the
need for an external interface circuit. The HOA6299 series employs an
IR transmissive housing which features smooth optical faces without
external aperture openings; this feature is desirable when aperture
blockage from airborne contaminants is a possibility.
The HOA6299 Series through beam modules are tested to ensure
operation at minimum separation of (63,5 mm) 2.5 in. This gap can
easily be changed for applications with other spacing requirements.
Housing material is IR transmissive polysulfone. Housings are soluble
in chlorinated hydrocarbons and ketones. Recommended cleaning
agents are methanol and isopropanol.
MICRO SWITCH Sensing and Control
Infrared Assemblies
Through Beam Modules
HOA6299 Series
ABSOLUTE MAXIMUM RATINGS (25 °C free-air temperature
unless otherwise noted)
Operating Voltage
Emitter
Detector
Operating Temperature
Storage Temperature
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum
Ratings” for extended periods of time
may affect reliability.
Failure to comply with these
instructions may result in product
damage.
2 to 7 V
5 to 12 V
0 °C to 50 °C (32 °F to 122 °F)
-20 °C to 85 °C (-4 °F to 185 °F)
ELECTRICAL CHARACTERISTICS (25 °C unless otherwise noted)
Parameter
Symbol
Min
Operating Supply Voltage
VCC
4.5
Low Level Output Voltage
VOL
Typ
Max
Unit
Test Condition
12
V
TA=25 °C
0.4
V
VCC=5 V, IOH=10 mA
Light path blocked (Note 1)
High Level Output Voltage
VOH
4.5
V
VCC=5 V, IOH=0 mA
Light path not blocked
(Note 1)
Output Sink Current
IOL
10
mA
VCC=5 V, VOL=0.4 V
µs
Response Time
tON
5
VCC=5 V
Note:
1. Emitter and detector modules are tested to ensure operation at minimum separation of 63,5 mm (2.5 in) when
properly aligned.
SCHEMATIC
2 Honeywell • MICRO SWITCH Sensing and Control
For application help: call 1-800-537-6945
Infrared Assemblies
Through Beam Modules
HOA6299 Series
Figure 1
Emitter Module Drive Current vs Applied Voltage
Emitter Module Drive Current - mA
80
70
60
50
40
30
20
10
0
2.0
3.0
4.0
5.0
Applied Voltage - Volts
6.0
7.0
Figure 2
Desired Separation Distance vs Emitter Applied Voltage
Desired Separation Distance - Inches
12.0
10.0
8.0
6.0
4.0
2.0
0.0
2.0
3.0
4.0
5.0
6.0
7.0
Emitter Applied Voltage - Volts
For application help: call 1-800-537-6945
Honeywell • MICRO SWITCH Sensing and Control 3
Infrared Assemblies
Through Beam Modules
HOA6299 Series
ORDER GUIDE
Catalog Listing
HOA6299-002
HOA6299-003
Description
Through beam, IR emitting diode
Through beam, IR detector module
OUTLINE DIMENSIONS (mm/in)
HOA6299-002
THE EMITTING AREA
FALLS WITHIN A 5,59
(0.22) DIAMETER ON
THIS CENTER LINE
Tolerance: 3 plc decimals ± 0.25 3 (0.010)
2 plc decimals ± 0.51 3 (0.020)
12,70
(0.500)
3,18 (0.125) DIA.
THRU HOLE
3,81
(0.150)
3,81
(0.150)
PIN 1
CATHODE
304,8
(12.0 +0.5)
HOA6299-003
3,68
(0.145)
THE SENSING AREA
FALLS WITHIN A 5,59
(0.22) DIAMETER ON
THIS CENTER LINE
12,70
(0.500)
3,18 (0.125) DIA.
THRU HOLE
3,81
(0.150)
12,70
(0.500)
PANDUIT, CE156F24-3
12,70
(0.500)
3,81
(0.150)
3,81
(0.150)
PIN 1
381
(15.0 +0.5)
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective material and faulty workmanship.
Contact your local sales office for warranty information.
If warranted goods are returned to Honeywell during that
period of coverage, Honeywell will repair or replace
without charge those items it finds defective. The
foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose.
While we provide application assistance, personally,
through our literature, and through the Honeywell
website, it is up to the customer to determine the
suitability of the product in the application.
Specifications may change at any time without notice.
The information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
SALES AND SERVICE
MICRO SWITCH Sensing and Control serves its
customers through a worldwide network of sales offices
and distributors. For application assistance, current
specifications, or name of the nearest Authorized
Distributor, contact a nearby sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
[email protected]
MICRO SWITCH
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
006460-1-EN IL50 GLO 699 Printed in USA
ANODE
12,70
(0.500)
OUT
VCC
3,81
(0.150)
PANDUIT, CE156F24-2
12,70
(0.500)
GND
3,68
(0.145)
www.honeywell.com/sensing
Similar pages