ON NVMFS5C404N Single n-channel power mosfet Datasheet

NVMFS5C404N
Power MOSFET
40 V, 0.7 mW, 378 A, Single N−Channel
Features
•
•
•
•
•
•
Small Footprint (5x6 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
NVMFS5C404NWF − Wettable Flank Option for Enhanced Optical
Inspection
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
www.onsemi.com
V(BR)DSS
RDS(ON) MAX
ID MAX
40 V
0.7 mW @ 10 V
378 A
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter
Drain−to−Source Voltage
Gate−to−Source Voltage
Continuous Drain
Current RqJC
(Notes 1, 3)
TC = 25°C
Power Dissipation
RqJC (Note 1)
Continuous Drain
Current RqJA
(Notes 1, 2, 3)
Steady
State
Pulsed Drain Current
Value
Unit
VDSS
40
V
VGS
±20
V
ID
378
A
TC = 100°C
TC = 25°C
Steady
State
PD
ID
Operating Junction and Storage Temperature
Source Current (Body Diode)
S (1,2,3)
N−CHANNEL MOSFET
A
53
MARKING
DIAGRAM
37
PD
TA = 100°C
TA = 25°C, tp = 10 ms
G (4)
W
200
100
TA = 100°C
TA = 25°C
D (5,6)
267
TC = 100°C
TA = 25°C
Power Dissipation
RqJA (Notes 1 & 2)
Symbol
W
3.9
1.9
D
1
IDM
900
A
TJ, Tstg
−55 to
+ 175
°C
IS
191
A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 38 A)
EAS
907
mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
S
S
S
G
D
XXXXXX
AYWZZ
D
D
XXXXXX = 5C404N
XXXXXX = (NVMFS5C404N) or
XXXXXX = 404NWF
XXXXXX = (NVMFS5C404NWF)
A
= Assembly Location
Y
= Year
W
= Work Week
ZZ
= Lot Traceability
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter
Symbol
Value
Unit
ORDERING INFORMATION
Junction−to−Case − Steady State
RqJC
0.75
°C/W
Junction−to−Ambient − Steady State (Note 2)
RqJA
39
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
© Semiconductor Components Industries, LLC, 2015
May, 2015 − Rev. 1
1
Publication Order Number:
NVMFS5C404N/D
NVMFS5C404N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
40
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
V
19.7
VGS = 0 V,
VDS = 40 V
mV/°C
TJ = 25 °C
10
TJ = 125°C
250
IGSS
VDS = 0 V, VGS = 20 V
VGS(TH)
VGS = VDS, ID = 250 mA
mA
100
nA
4.0
V
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage
Threshold Temperature Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
Forward Transconductance
RDS(on)
2.0
−6.2
VGS = 10 V
gFS
ID = 50 A
VDS =15 V, ID = 50 A
0.57
mV/°C
0.7
210
mW
S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
8400
VGS = 0 V, f = 1 MHz, VDS = 25 V
QG(TOT)
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
QGD
Plateau Voltage
VGP
pF
120
Total Gate Charge
Gate−to−Drain Charge
4600
VGS = 10 V, VDS = 20 V; ID = 50 A
128
22
nC
35
VGS = 10 V, VDS = 20 V; ID = 50 A
26
4.3
V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
td(ON)
16
tr
113
td(OFF)
VGS = 10 V, VDS = 20 V,
ID = 50 A, RG = 2.5 W
tf
ns
77
109
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.76
TJ = 125°C
0.63
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 50 A
1.2
V
96
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 50 A
QRR
49
ns
47
189
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
2
NVMFS5C404N
TYPICAL CHARACTERISTICS
600
10 V
700 8 V
7V
600
VDS = 10 V
6.5 V
5.8 V
500
5.6 V
400
5.4 V
300
5.2 V
5.0 V
200
4.8 V
4.6 V
4.4 V
100
0
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
ID, DRAIN CURRENT (A)
6V
0.5
1.0
2.0
1.5
2.5
TJ = 25°C
200
TJ = 125°C
100
TJ = −55°C
4.0
6.0
5.0
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
4
5
6
7
8
9
10
0.64
0.62
0.60
0.58
0.56
0.54
0.52
0.50
0
100
200
300
400
500
600
700
800
VGS, GATE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
1.E−03
2.1
1.9
VGS = 10 V
ID = 50 A
IDSS, LEAKAGE (A)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE
300
VGS, GATE−TO−SOURCE VOLTAGE (V)
TJ = 25°C
IDS = 25 A
3
400
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
4.5
0.0
500
0
3.0
3.0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
ID, DRAIN CURRENT (A)
800
1.7
1.5
1.3
1.1
1.E−04
TJ = 150°C
1.E−05
TJ = 125°C
1.E−06
0.9
TJ = 85°C
0.7
−50 −25
1.E−07
0
25
50
75
100
125
150
175
0
5
10
15
20
25
30
35
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
3
40
NVMFS5C404N
TYPICAL CHARACTERISTICS
CISS
1E+4
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
1E+5
COSS
1E+3
1E+2
CRSS
1E+1
VGS = 0 V
TJ = 25°C
f = 1 MHz
1E+0
5
0
15
10
25
20
30
35
QGS
QGD
4
VDS = 20 V
ID = 50 A
TJ = 25°C
2
0
10 20 30 40 50 60 70 80 90 100 110 120 130
0
QG, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
50
td(off)
tf
tr
td(on)
100
IS, SOURCE CURRENT (A)
t, TIME (ns)
6
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
VGS = 10 V
VDS = 20 V
ID = 50 A
10
1
10
5
TJ = 150°C
TJ = 125°C
1
1
10
100
0.3
0.4
0.5
0.6
TJ = 25°C
0.7
0.8
TJ = −55°C
0.9
1.0
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
TC = 25°C
VGS ≤ 10 V
0.01 ms
0.1 ms
100
100
1 ms
dc
TJ(initial) = 25°C
IPEAK (A)
IDS, DRAIN−TO−SOURCE CURRENT (A)
QT
8
40
1000
1000
10
10 ms
TJ(initial) = 100°C
10
10
RDS(on) Limit
Thermal Limit
Package Limit
1
1
0.1
1
10
100
1E−04
1E−03
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
TIME IN AVALANCHE (s)
Figure 11. Safe Operating Area
Figure 12. IPEAK vs. Time in Avalanche
www.onsemi.com
4
1E−02
NVMFS5C404N
100
RqJA(t) (°C/W)
50% Duty Cycle
10
20%
10%
5%
1
2%
1%
NVMFS5C404N 650 mm2, 2 oz., Cu Single Layer Pad
0.1
Single Pulse
0.01
1E−06
1E−05
1E−04
1E−03
1E−02
1E−01
1E+00
1E+01
1E+02
1E+03
PULSE TIME (sec)
Figure 13. Thermal Characteristics
DEVICE ORDERING INFORMATION
Device
Marking
Package
Shipping†
NVMFS5C404NT1G
5C404N
DFN5
(Pb−Free)
1500 / Tape & Reel
NVMFS5C404NWFT1G
404NWF
DFN5
(Pb−Free, Wettable Flanks)
1500 / Tape & Reel
NVMFS5C404NT3G
5C404N
DFN5
(Pb−Free)
5000 / Tape & Reel
NVMFS5C404NWFT3G
404NWF
DFN5
(Pb−Free, Wettable Flanks)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
NVMFS5C404N
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE L
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
0.20 C
D
A
2
B
D1
2X
0.20 C
4X
E1
q
E
2
c
1
2
3
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
e
G
K
L
L1
M
q
A1
4
TOP VIEW
3X
C
e
SEATING
PLANE
0.10 C
DETAIL A
A
0.10 C
RECOMMENDED
SOLDERING FOOTPRINT*
SIDE VIEW
8X
DETAIL A
C A B
0.05
c
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
2X
0.495
4.560
2X
b
0.10
MILLIMETERS
MIN
NOM
MAX
0.90
1.00
1.10
0.00
−−−
0.05
0.33
0.41
0.51
0.23
0.28
0.33
5.00
5.15
5.30
4.70
4.90
5.10
3.80
4.00
4.20
6.15
6.00
6.30
5.70
5.90
6.10
3.45
3.65
3.85
1.27 BSC
0.51
0.61
0.71
1.20
1.35
1.50
0.51
0.61
0.71
0.125 REF
3.00
3.40
3.80
0_
−−−
12 _
1.530
e/2
L
1
4
3.200
4.530
K
E2
PIN 5
(EXPOSED PAD)
L1
M
1.330
2X
0.905
1
0.965
G
D2
BOTTOM VIEW
4X
1.000
4X 0.750
1.270
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NVMFS5C404N/D
Similar pages