Taiyo Yuden NRS4018T680MDGJ Smd power inductors(nr series/nr series h type/s type/v type) Datasheet

Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
14
SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
■PARTS NUMBER
N
R △
①
4
REFLOW
*Operating Temp. : -25~+120℃ (NRS40/50/60/80 : -25~+125℃) (Including self-generated heat)
0
1
8
T △
③
②
/ POWER INDUCTORS
INDUCTORS
①Series name
Code
NR△
NRH
NRS
NRV
1
0 0
④
M △
⑤ ⑥
△=Blank space
③Packaging
Code
T△
Series name
Coating resin specification
②Dimensions(L×W×H)
Code
2010
2012
2410
2412
3010
3012
3015
4010
4012
4018
5010
5012
5014
5020
5024
5030
5040
6010
6012
6014
6020
6028
6045
8030
8040
Packaging
Taping
④Nominal inductance
Code
(example)
2R2
100
101
※R=Decimal point
Dimensions(L×W×H)[mm]
2.0×2.0×1.0
2.0×2.0×1.2
2.4×2.4×1.0
2.4×2.4×1.2
3.0×3.0×1.0
3.0×3.0×1.2
3.0×3.0×1.5
4.0×4.0×1.0
4.0×4.0×1.2
4.0×4.0×1.8
4.9×4.9×1.0
4.9×4.9×1.2
4.9×4.9×1.4
4.9×4.9×2.0
4.9×4.9×2.4
4.9×4.9×3.0
4.9×4.9×4.0
6.0×6.0×1.0
6.0×6.0×1.2
6.0×6.0×1.4
6.0×6.0×2.0
6.0×6.0×2.8
6.0×6.0×4.5
8.0×8.0×3.0
8.0×8.0×4.0
⑤Inductance tolerance
Code
M
N
Nominal inductance[μH]
2.2
10
100
Inductance tolerance
±20%
±30%
⑥Internal code
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
L
Recommended Land Patterns
Type
B
H
e
C
W
f
e
A
A
NRV2010,
NRS2012, NRV2012
NRH2410
NRH2412
NR 3010, NRH3010
NR 3012, NRH3012, NRV3012
NR 3015, NRS3015
NR 4010, NRS4010
NR 4012, NRS4012
NR 4018, NRS4018
NRS8030
NR 8040, NRS8040
A
B
C
0.65
1.35
2.0
0.7
1.45
2.0
0.8
2.2
2.7
1.2
2.8
3.7
1.8
5.6
7.5
Unit:mm
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
L
W
H
e
f
2.0±0.1
(0.079±0.004)
2.0±0.1
(0.079±0.004)
2.4±0.1
(0.095±0.004)
2.4±0.1
(0.095±0.004)
3.0±0.1
(0.118±0.004)
2.0±0.1
(0.079±0.004)
2.0±0.1
(0.079±0.004)
2.4±0.1
(0.095±0.004)
2.4±0.1
(0.095±0.004)
3.0±0.1
(0.118±0.004)
1.0 max
(0.039 max)
1.2 max
(0.047 max)
1.0 max
(0.039 max)
1.2 max
(0.047 max)
1.0 max
(0.039 max)
0.5±0.2
(0.020±0.008)
0.5±0.2
(0.020±0.008)
0.6±0.2
(0.024±0.008)
0.6±0.2
(0.024±0.008)
0.9±0.2
(0.035±0.008)
1.25±0.2
(0.050±0.008)
1.25±0.2
(0.050±0.008)
1.45±0.2
(0.057±0.008)
1.45±0.2
(0.057±0.008)
1.9±0.2
(0.075±0.008)
Standard quantity
[pcs] Taping
2500
2500
2500
2500
2000
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
38
14
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS8030
NR 8040
NRS8040
3.0±0.1
(0.118±0.004)
3.0±0.1
(0.118±0.004)
1.2 max
(0.047 max)
0.9±0.2
(0.035±0.008)
1.9±0.2
(0.075±0.008)
3.0±0.1
(0.118±0.004)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
8.0±0.2
(0.315±0.008)
3.0±0.1
(0.118±0.004)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
8.0±0.2
(0.315±0.008)
0.9±0.2
(0.035±0.008)
1.1±0.2
(0.043±0.008)
1.1±0.2
(0.043±0.008)
1.1±0.2
(0.043±0.008)
1.60±0.3
(0.063±0.012)
1.9±0.2
(0.075±0.008)
2.5±0.2
(0.098±0.008)
2.5±0.2
(0.098±0.008)
2.5±0.2
(0.098±0.008)
5.6±0.3
(0.22±0.012)
8.0±0.2
(0.315±0.008)
8.0±0.2
(0.315±0.008)
1.5 max
(0.059 max)
1.0 max
(0.039 max)
1.2 max
(0.047 max)
1.8 max
(0.071 max)
3.0 max
(0.118 max)
*1) 4.2 max
(0.165 max)
*2) 4.0 max
(0.157 max)
1.60±0.3
(0.063±0.012)
5.6±0.3
(0.22±0.012)
*2)100~101type
L
2000
5000
4500
3500
1000
1000
Unit:mm(inch)
Recommended Land Patterns
Type
B
ΔI
H
NRS5010
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
NR 5040, NRS5040
NRS6010
NR 6012, NRS6012
NRS6014
NR 6020, NRS6020
NR 6028, NRS6028
NR 6045, NRS6045
e
C
W
f
e
A
A
A
B
C
1.5
3.6
4.0
1.6
4.7
5.7
Unit:mm
Type
L
W
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
NRS5024
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
NRS5030
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
NR 5040
NRS5040
4.9±0.2
(0.193±0.008)
4.9±0.2
(0.193±0.008)
NRS5010
NRS5012
NRS5014
NRS5020
6.0±0.2
6.0±0.2
(0.236±0.008) (0.236±0.008)
NR 6012
6.0±0.2
6.0±0.2
NRS6012
(0.236±0.008) (0.236±0.008)
6.0±0.2
6.0±0.2
NRS6014
(0.236±0.008) (0.236±0.008)
NR 6020
6.0±0.2
6.0±0.2
NRS6020
(0.236±0.008) (0.236±0.008)
NR 6028
6.0±0.2
6.0±0.2
NRS6028
(0.236±0.008) (0.236±0.008)
NR 6045
6.0±0.2
6.0±0.2
NRS6045
(0.236±0.008) (0.236±0.008)
*3)1R0~1R5 type,
*4)2R2~330 type
*5)R47~100 type,
*6)150~470 type
*7)1R5~100 type,
*8)150~470 type
NRS6010
H
1.0 max
(0.039 max)
1.2 max
(0.047 max)
1.4 max
(0.055 max)
2.0 max
(0.079 max)
*3) 2.5 max
(0.098 max)
*4) 2.4 max
(0.094 max)
*5) 3.1 max
(0.122 max)
*6) 3.0 max
(0.118 max)
*7) 4.1 max
(0.161 max)
*8) 4.0 max
(0.157 max)
1.0 max
(0.039 max)
1.2 max
(0.047 max)
1.4 max
(0.055 max)
2.0 max
(0.079 max)
2.8 max
(0.110 max)
4.5 max
(0.177 max)
Standard quantity
[pcs] Taping
e
f
Δl
1.2±0.2
(0.047±0.008)
1.2±0.2
(0.047±0.008)
1.2±0.2
(0.047±0.008)
1.2±0.2
(0.047±0.008)
3.3±0.2
(0.130±0.008)
3.3±0.2
(0.130±0.008)
3.3±0.2
(0.130±0.008)
3.3±0.2
(0.130±0.008)
1.3typ
(0.051typ)
1.3typ
(0.051typ)
1.3typ
(0.051typ)
1.3typ
(0.051typ)
1.2±0.2
(0.047±0.008)
3.3±0.2
(0.130±0.008)
1.3typ
(0.051typ)
1.2±0.2
(0.047±0.008)
3.3±0.2
(0.130±0.008)
1.3typ
(0.051typ)
500
1.2±0.2
(0.047±0.008)
3.3±0.2
(0.130±0.008)
1.3typ
(0.051typ)
1500
1.35±0.2
(0.053±0.008)
1.35±0.2
(0.053±0.008)
1.35±0.2
(0.053±0.008)
1.35±0.2
(0.053±0.008)
1.35±0.2
(0.053±0.008)
1.35±0.2
(0.053±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
2.3typ
(0.091typ)
2.3typ
(0.091typ)
2.3typ
(0.091typ)
2.3typ
(0.091typ)
2.3typ
(0.091typ)
2.3typ
(0.091typ)
/ POWER INDUCTORS
INDUCTORS
*1)0R9~6R8 type,
2000
1000
1000
1000
800
2500
1000
1000
1000
2500
2000
1500
Unit:mm(inch)
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
39
■PARTS NUMBER
●NRS2012 Shielded type
Parts number
NRS2012T
NRS2012T
NRS2012T
NRS2012T
NRS2012T
1R0N GJ
1R5N GJ
2R2M GJ
3R3M GJ
4R7M GJ
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±30%
±30%
±20%
±20%
±20%
-
-
-
-
-
0.070
0.090
0.107
0.190
0.241
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
0.68
1.0
1.5
2.2
3.3
4.7
±30%
±30%
±30%
±20%
±20%
±20%
±20%
-
-
-
-
-
-
-
0.052
0.060
0.080
0.100
0.175
0.250
0.320
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±30%
±30%
±20%
±20%
±20%
-
-
-
-
-
0.073
0.100
0.129
0.227
0.325
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
106
94
77
56
50
43
32
27
22
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
1.47
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
180
101
89
72
56
45
34
29
0.050
0.077
0.100
0.140
0.225
0.300
0.420
0.600
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
1.5
2.2
3.3
4.7
6.8
10
15
22
47
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
99
86
64
50
44
34
25
22
17
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
2.050
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
1,900
1,700
1,650
1,500
1,350
1,370
1,000
1,020
900
910
Measuring
frequency[kHz]
100
100
100
100
100
●NRV2010 type
Parts number
/ POWER INDUCTORS
INDUCTORS
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
NRV2010T
R47N GF
R68N GF
1R0N GF
1R5M GF
2R2M GF
3R3M GF
4R7M GF
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,100
2,000
1,850
1,850
1,550
1,600
1,350
1,450
1,100
1,100
880
1,000
760
820
Measuring
frequency[kHz]
100
100
100
100
100
100
100
●NRV2012 type
Parts number
NRV2012T
NRV2012T
NRV2012T
NRV2012T
NRV2012T
1R0N GF
1R5N GF
2R2M GF
3R3M GF
4R7M GF
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,200
1,650
1,800
1,400
1,600
1,200
1,250
900
1,100
750
Measuring
frequency[kHz]
100
100
100
100
100
●NRH2410 Shielded type
Parts number
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
R68NN 4
1R0NN 4
1R5MN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,200
1,570
1,800
1,410
1,550
1,160
1,290
970
1,000
770
880
670
750
570
550
450
470
370
390
300
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
●NRH2412 Shielded type
Parts number
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
NRH2412T
R47NNGJ
1R0NNGH
1R5NNGH
2R2MNGH
3R3MNGH
4R7MNGH
6R8MNGH
100MNGH
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,900
2,100
2,350
1,300
2,100
1,150
1,700
1,000
1,400
750
1,150
650
950
550
810
450
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRH3010 Shielded type
Parts number
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
1R2NN
1R5NN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
470MN
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
1,700
1,480
1,440
1,370
1,300
1,300
1,000
1,030
850
900
700
745
600
620
450
480
380
410
250
285
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
40
14
■PARTS NUMBER
●NRH3012 Shielded type
Parts number
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
R47NN
1R0NN
1R5NN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
160
111
95
78
61
50
43
32
26
22
0.033
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
110
92
70
55
48
40
32
0.065
0.075
0.120
0.150
0.190
0.300
0.470
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
22
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
100
87
64
49
40
36
28
20
0.030
0.038
0.058
0.078
0.120
0.160
0.220
0.520
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
116
73
58
47
38
31
24
19
0.056
0.085
0.100
0.140
0.200
0.300
0.430
0.570
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100
70
60
45
35
30
24
18
0.042
0.060
0.070
0.095
0.125
0.170
0.260
0.400
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,600
1,900
2,200
1,710
1,700
1,600
1,500
1,370
1,200
1,210
1,000
1,060
850
890
730
720
530
570
500
500
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
●NRV3012 Shielded type
Parts number
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
Measuring
frequency[kHz]
100
100
100
100
100
100
100
●NRS3015 Shielded type
Parts number
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
NRS3015T
1R0NNGH
1R5NNGH
2R2MNGH
3R3MNGH
4R7MNGH
6R8MNGH
100MNGH
220MNGH
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,100
2,100
1,800
1,820
1,480
1,500
1,210
1,230
1,020
1,040
870
880
700
710
470
470
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRS4010 Shielded type
Parts number
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
NRS4010T
1R0NDGG
2R2MDGG
3R3MDGG
4R7MDGG
6R8MDGG
100MDGG
150MDGG
220MDGG
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,000
1,900
1,200
1,500
1,100
1,400
950
1,200
800
1,000
620
750
540
600
450
500
Measuring
frequency[kHz]
/ POWER INDUCTORS
INDUCTORS
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
NRV3012T
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,500
1,600
2,100
1,400
1,800
1,100
1,600
1,000
1,250
850
950
650
800
550
100
100
100
100
100
100
100
100
●NRS4012 Shielded type
Parts number
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
NRS4012T
1R0NDGG
2R2MDGJ
3R3MDGJ
4R7MDGJ
6R8MDGJ
100MDGJ
150MDGJ
220MDGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,800
2,200
1,650
1,900
1,400
1,700
1,200
1,500
900
1,300
800
1,100
650
750
500
620
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
41
■PARTS NUMBER
●NRS4018 Shielded type
Parts number
NRS4018T 1R0NDGJ
NRS4018T 2R2MDGJ
NRS4018T 3R3MDGJ
NRS4018T 4R7MDGJ
NRS4018T 6R8MDGJ
NRS4018T 100MDGJ
NRS4018T 150MDGJ
NRS4018T 220MDGJ
NRS4018T 330MDGJ
NRS4018T 470MDGJ
NRS4018T 680MDGJ
NRS4018T 101MDGJ
NRS4018T 151MDGJ
NRS4018T 221MDGJ
/ POWER INDUCTORS
INDUCTORS
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
60
45
35
30
25
18
15
12
10
8.3
6.5
5.5
4.0
0.027
0.042
0.055
0.070
0.098
0.150
0.210
0.290
0.460
0.650
1.00
1.45
2.30
3.80
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
95
65
42
37
33
23
19
15
0.070
0.105
0.125
0.145
0.185
0.250
0.400
0.600
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
100
86
70
48
40
36
26
22
0.053
0.070
0.085
0.160
0.180
0.260
0.420
0.670
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.2
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
185
86
56
48
41
33
27
20
16
0.025
0.045
0.065
0.080
0.100
0.150
0.200
0.320
0.450
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
230
81
68
57
46
37
30
24
20
17
0.012
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
4,000
3,200
3,000
2,200
2,300
2,000
2,000
1,700
1,600
1,450
1,300
1,200
1,100
850
900
720
700
550
600
440
520
320
420
280
340
220
275
170
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
●NRS5010 type
Parts number
NRS5010T 1R0NMGF
NRS5010T 2R2NMGF
NRS5010T 3R3MMGF
NRS5010T 4R7MMGF
NRS5010T 6R8MMGF
NRS5010T 100MMGF
NRS5010T 150MMGF
NRS5010T 220MMGF
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,350
1,750
1,500
1,400
1,400
1,250
1,200
1,150
1,000
1,000
850
900
680
650
550
450
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRS5012 type
Parts number
NRS5012T 1R0NMGF
NRS5012T 1R5NMGF
NRS5012T 2R2MMGF
NRS5012T 3R3MMGF
NRS5012T 4R7MMGF
NRS5012T 6R8MMGF
NRS5012T 100MMGF
NRS5012T 150MMGF
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
4,500
2,300
3,800
2,200
3,100
2,000
2,400
1,450
2,200
1,400
1,700
1,100
1,400
850
1,200
640
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRS5014 Shielded type
Parts number
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
NRS5014T
R47NMGG
1R2NMGG
2R2NMGG
3R3NMGG
4R7NMGG
6R8MMGG
100MMGG
150MMGG
220MMGG
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
5,800
3,300
3,800
2,400
2,800
2,000
2,350
1,700
2,050
1,400
1,600
1,200
1,400
1,050
1,100
650
900
550
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
●NRS5020 Shielded type
Parts number
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
R47NMGJ
1R0NMGJ
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,100
5,000
4,000
3,600
3,350
3,200
2,900
2,900
2,400
2,400
2,000
2,000
1,600
1,650
1,300
1,450
1,100
1,200
900
1,000
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
42
14
■PARTS NUMBER
●NRS5024 Shielded type
Parts number
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
NRS5024T
1R0NMGJ
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
330MMGJ
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
85
67
51
41
37
28
21
18
15
11
0.016
0.022
0.029
0.043
0.055
0.080
0.125
0.170
0.230
0.370
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
185
110
46
36
31
22
20
14
13
10
9
0.010
0.015
0.023
0.030
0.035
0.052
0.070
0.125
0.180
0.225
0.325
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
60
42
32
28
21
18
13
9
7
6
0.017
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
22
±20%
±20%
±20%
±20%
±20%
±20%
±20%
77
56
42
36
30
25
12
0.090
0.110
0.135
0.165
0.220
0.270
0.580
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.5
3.3
4.7
5.3
6.8
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
95
69
45
42
36
34
30
22
18
12
8
6
3
1
0.050
0.067
0.090
0.105
0.125
0.125
0.165
0.200
0.295
0.465
0.580
0.965
1.16
1.67
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
5,800
4,400
5,200
3,600
4,100
3,100
3,100
2,400
2,700
2,000
2,200
1,600
1,700
1,200
1,400
1,000
1,200
820
1,000
630
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
●NRS5030 Shielded type
Parts number
R47NMGJ
1R0NMGJ
2R2NMGJ
3R3MMGJ
4R7MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
330MMGJ
470MMGJ
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
●NRS5040 Shielded type
Parts number
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
NRS5040T
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7NMGK
6R8MMGJ
100MMGJ
150MMGJ
220MMGK
330MMGJ
470MMGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,400
4,500
5,000
3,700
4,000
3,300
3,300
3,100
2,800
2,400
2,300
2,100
2,000
1,800
1,500
1,400
1,300
1,200
1,100
900
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
/ POWER INDUCTORS
INDUCTORS
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
NRS5030T
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
9,000
5,000
6,600
4,000
4,200
3,500
3,600
3,000
3,100
2,600
2,500
2,300
2,100
1,700
1,600
1,400
1,400
1,050
1,150
800
950
700
●NRS6010 type
Parts number
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
1R5MMGF
2R2MMGF
3R3MMGF
4R7MMGF
6R8MMGF
100MMGF
220MMGF
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,400
1,900
1,900
1,700
1,600
1,500
1,300
1,400
1,200
1,200
1,000
1,100
650
700
Measuring
frequency[kHz]
100
100
100
100
100
100
100
●NRS6012 Shielded type
Parts number
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
NRS6012T
1R0NMGJ
1R5NMGG
2R5NMGG
3R3NMGG
4R7MMGG
5R3MMGJ
6R8MMGJ
100MMGJ
150MMGJ
220MMGJ
330MMGJ
470MMGJ
680MMGJ
101MMGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
3,000
2,400
2,600
2,100
2,100
1,800
1,800
1,700
1,600
1,550
1,500
1,550
1,300
1,350
1,000
1,200
800
800
760
650
590
550
520
460
440
410
350
320
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
43
■PARTS NUMBER
●NRS6014 Shielded type
Parts number
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
NRS6014T
1R2NMGG
2R2NMGG
3R3NMGG
4R7MMGG
6R8MMGG
100MMGG
150MMGG
220MMGG
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
2.2
3.3
4.7
6.8
10
15
22
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
77
61
41
36
30
24
20
16
0.042
0.055
0.075
0.090
0.115
0.140
0.210
0.300
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
22
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.5
2.2
3.0
4.7
6.8
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
78
68
55
39
25
20
17
12
10
8
5
3
0.013
0.016
0.020
0.023
0.031
0.043
0.065
0.095
0.135
0.220
0.300
0.420
0.600
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
95
80
60
45
25
15
12
10
7
6
5
4
3
0.014
0.016
0.019
0.022
0.024
0.030
0.036
0.046
0.070
0.107
0.141
0.211
0.304
0.466
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
80
60
50
40
32
27
20
16
13
11
0.009
0.012
0.015
0.019
0.022
0.029
0.033
0.060
0.070
0.120
0.170
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
4,000
2,750
3,000
2,300
2,500
2,000
2,000
1,900
1,700
1,650
1,400
1,400
1,150
1,200
950
1,000
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRS6020 Shielded type
Parts number
/ POWER INDUCTORS
INDUCTORS
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
NRS6020T
0R8NMGG
1R5NMGJ
2R2NMGJ
3R3NMGJ
4R7NMGJ
6R8NMGJ
100MMGG
220MMGG
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,400
4,100
4,300
3,600
3,200
2,900
2,800
2,750
2,400
2,150
2,000
1,800
1,900
1,500
1,250
950
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
●NRS6028 Shielded type
Parts number
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
NRS6028T
0R9NMGJ
1R5NMGJ
2R2NMGJ
3R0NMGJ
4R7MMGK
6R8MMGJ
100MMGK
150MMGJ
220MMGJ
330MMGJ
470MMGJ
680MMGJ
101MMGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,700
4,600
5,100
4,200
4,200
3,700
3,600
3,400
2,700
3,000
2,600
2,500
1,900
1,900
1,600
1,800
1,300
1,400
1,100
1,100
1,000
920
800
770
650
660
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
●NRS6045 Shielded type
Parts number
NRS6045T 1R0NMGK
NRS6045T 1R3NMGK
NRS6045T 1R8NMGK
NRS6045T 2R3NMGK
NRS6045T 3R0NMGK
NRS6045T 4R5MMGK
NRS6045T 6R3MMGK
NRS6045T 100MMGK
NRS6045T 150MMGK
NRS6045T 220MMGK
NRS6045T 330MMGK
NRS6045T 470MMGK
NRS6045T 680MMGK
NRS6045T 101MMGK
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
9,800
4,500
8,200
4,200
7,200
3,900
6,400
3,600
5,600
3,300
4,400
3,100
3,600
3,000
3,100
2,400
2,500
1,900
2,000
1,600
1,650
1,400
1,400
1,150
1,100
950
900
750
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
●NRS8030 Shielded type
Parts number
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
NRS8030T
1R0NJGJ
1R5NJGJ
2R2NJGJ
3R3MJGJ
4R7MJGJ
6R8MJGJ
100MJGJ
150MJGJ
220MJGJ
330MJGJ
470MJGJ
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
7,800
6,200
6,200
5,300
4,900
4,800
4,200
4,300
3,600
4,000
3,000
3,400
2,400
3,000
2,000
2,200
1,750
1,900
1,300
1,500
1,100
1,300
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
44
14
■PARTS NUMBER
●NRS8040 Shielded type
Parts number
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
NRS8040T
0R9NJGJ
1R4NJGJ
2R0NJGJ
3R6NJGJ
4R7NJGJ
6R8NJGJ
100MJGJ
150MJGJ
220MJGJ
330MJGK
470MJGJ
101MJGJ
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
100
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
85
63
50
34
30
24
22
16
13
12
8
6
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.140
0.280
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
1.55
2.05
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
1.45
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
1.81
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
13,000
7,800
10,000
7,000
8,100
6,300
6,400
4,900
5,400
4,100
4,400
3,700
3,800
3,100
2,900
2,400
2,400
2,200
2,000
1,700
1,500
1,500
1,100
1,000
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
●NR 3010 Shielded type
NR 3010T 1R0N
NR 3010T 1R5N
NR 3010T 2R2M
NR 3010T 3R3M
NR 3010T 4R7M
NR 3010T 6R8M
NR 3010T 100M
NR 3010T 150M
NR 3010T 220M
NR 3010T 330M
NR 3010T 470M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
1,300
1,400
1,200
1,300
1,100
1,100
870
940
750
780
610
630
500
510
400
400
350
350
260
275
220
235
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
●NR 3012 Shielded type
Parts number
NR 3012T 1R0N
NR 3012T 1R5N
NR 3012T 2R2M
NR 3012T 3R3M
NR 3012T 4R7M
NR 3012T 6R8M
NR 3012T 100M
NR 3012T 150M
NR 3012T 220M
NR 3012T 330M
NR 3012T 470M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
1,500
1,490
1,360
1,400
1,100
1,200
910
1,050
770
980
670
740
540
630
440
485
375
420
310
330
250
280
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
/ POWER INDUCTORS
INDUCTORS
Parts number
●NR 3015 Shielded type
Parts number
NR 3015T 1R0N
NR 3015T 1R5N
NR 3015T 2R2M
NR 3015T 3R3M
NR 3015T 4R7M
NR 3015T 6R8M
NR 3015T 100M
NR 3015T 150M
NR 3015T 220M
NR 3015T 330M
NR 3015T 470M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,100
2,100
1,800
1,820
1,480
1,500
1,210
1,230
1,020
1,040
870
880
700
710
560
560
470
470
390
370
320
300
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
●NR 4010 Shielded type
Parts number
NR 4010T 1R0N
NR 4010T 2R2N
NR 4010T 3R3M
NR 4010T 4R7M
NR 4010T 6R8M
NR 4010T 100M
NR 4010T 150M
NR 4010T 220M
NR 4010T 330M
NR 4010T 470M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
1,800
1,050
1,150
890
1,100
820
900
750
740
620
560
600
470
510
360
400
280
300
240
280
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
45
■PARTS NUMBER
●NR 4012 Shielded type
Parts number
NR 4012T 1R0N
NR 4012T 2R2M
NR 4012T 3R3M
NR 4012T 4R7M
NR 4012T 6R8M
NR 4012T 100M
NR 4012T 150M
NR 4012T 220M
NR 4012T 330M
NR 4012T 470M
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
80
52
44
34
29
24
19
16
12
10
8.3
6.5
5.5
4.0
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
1.50
2.50
4.00
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
60
42
32
28
21
18
13
9
7
6
0.020
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
2.5
4.0
5.3
6.8
10
15
22
33
47
68
100
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
45
39
34
30
22
18
12
8
6
3
1
0.090
0.105
0.125
0.165
0.235
0.330
0.530
0.700
1.05
1.35
2.18
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±20%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
22
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,500
1,500
1,650
1,200
1,200
980
1,050
960
900
840
740
770
560
600
510
540
400
420
350
370
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
●NR 4018 Shielded type
Parts number
/ POWER INDUCTORS
INDUCTORS
NR 4018T 1R0N
NR 4018T 2R2M
NR 4018T 3R3M
NR 4018T 4R7M
NR 4018T 6R8M
NR 4018T 100M
NR 4018T 150M
NR 4018T 220M
NR 4018T 330M
NR 4018T 470M
NR 4018T 680M
NR 4018T 101M
NR 4018T 151M
NR 4018T 221M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
4,000
1,830
2,700
1,440
2,000
1,230
1,700
1,200
1,450
1,060
1,200
840
940
650
800
590
650
490
570
420
470
320
400
270
310
220
270
170
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
●NR 5040 Shielded type
Parts number
NR 5040T 1R5N
NR 5040T 2R2N
NR 5040T 3R3N
NR 5040T 4R7N
NR 5040T 6R8M
NR 5040T 100M
NR 5040T 150M
NR 5040T 220M
NR 5040T 330M
NR 5040T 470M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,000
3,600
4,600
3,500
3,800
3,300
3,300
3,100
2,600
2,300
2,300
2,100
2,000
1,800
1,600
1,400
1,300
1,200
1,100
900
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
●NR 6012 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
6012T
2R5NE
4R0NE
5R3ME
6R8ME
100ME
150ME
220ME
330ME
470ME
680ME
101ME
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
2,100
1,730
1,800
1,570
1,500
1,400
1,300
1,180
1,000
1,000
800
790
760
630
590
530
520
460
440
410
350
320
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
●NR 6020 Shielded type
Parts number
NR
NR
NR
NR
NR
NR
NR
NR
6020T
6020T
6020T
6020T
6020T
6020T
6020T
6020T
0R8N
1R5N
2R2N
3R3N
4R7N
6R8N
100M
220M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
5,500
3,800
4,000
3,200
3,200
2,700
2,800
2,600
2,400
2,000
2,000
1,800
1,700
1,400
1,050
950
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
46
14
■PARTS NUMBER
●NR 6028 Shielded type
Parts number
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.5
2.2
3.0
4.7
6.0
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
78
68
55
39
30
20
17
12
10
8
5
3
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
95
80
60
45
25
15
12
10
7
6
5
4
3
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
EHS
Nominal inductance
[μH]
Inductance tolerance
Self-resonant
frequency
[MHz](min.)
DC Resistance
[Ω](±30%)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
68
100
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
85
63
50
34
30
24
22
16
13
12
8
7
6
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
6,600
4,600
5,000
4,200
4,200
3,700
3,600
3,400
2,700
3,000
2,500
2,500
1,900
1,900
1,600
1,800
1,300
1,400
1,100
1,100
950
920
760
770
620
660
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
●NR 6045 Shielded type
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
8,500
4,200
8,000
4,000
7,000
3,700
6,000
3,500
5,000
3,200
4,000
3,000
3,800
2,800
3,000
2,500
2,300
1,900
1,900
1,500
1,500
1,400
1,300
1,100
1,000
900
800
700
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
●NR 8040 Shielded type
Parts number
NR 8040T 0R9N
NR 8040T 1R4N
NR 8040T 2R0N
NR 8040T 3R6N
NR 8040T 4R7N
NR 8040T 6R8N
NR 8040T 100M
NR 8040T 150M
NR 8040T 220M
NR 8040T 330M
NR 8040T 470M
NR 8040T 680M
NR 8040T 101M
Rated current ※) [mA]
Saturation current
Temperature rise current
Idc2
Idc1
11,000
7,800
9,000
7,000
7,400
6,300
5,300
4,900
4,700
4,100
4,000
3,700
3,400
3,100
2,700
2,400
2,200
2,200
1,900
1,700
1,500
1,400
1,200
1,100
1,000
1,000
Measuring
frequency[kHz]
100
100
100
100
100
100
100
100
100
100
100
100
100
/ POWER INDUCTORS
INDUCTORS
Parts number
 ) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
i_smd_NR_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
47
SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
■PACKAGING
①Minimum Quantity
Standard Quantity [pcs]
Tape & Reel
2500
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
Type
NRS5010
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
NR 5040
NRS5040
NRS6010
NR 6012
NRS6012
NRS6014
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
NRS8030
NR 8040
NRS8040
2500
2500
2500
2000
2000
2000
5000
4500
3500
Standard Quantity [pcs]
Tape & Reel
1000
1000
1000
800
2500
500
1500
1000
1000
1000
2500
2000
1500
1000
1000
②Tape Material
●Embossed Tape
Top tape
Chip Filled
Sprocket hole
Base tape
Chip cavity
Chip
③Taping dimensions
●Embossed tape 8mm wide (0.315 inches wide)
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
Chip cavity
A
B
2.2±0.1
(0.102±0.004)
2.6±0.1
(0.087±0.004)
Insertion pitch
F
Tape thickness
T
K
2.2±0.1
(0.102±0.004)
0.25±0.05
(0.009±0.002)
1.3±0.1
(0.051±0.004)
2.6±0.1
(0.102±0.004)
0.25±0.05
(0.009±0.002)
1.3±0.1
(0.051±0.004)
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
4.0±0.1
(0.157±0.004)
3.2±0.1
(0.126±0.004)
3.2±0.1
(0.126±0.004)
0.3±0.05
(0.012±0.002)
1.9±0.1
(0.075±0.004)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
●Embossed tape 12mm wide (0.47 inches wide)
Type
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
Chip cavity
A
B
4.3±0.1
(0.169±0.004)
4.3±0.1
(0.169±0.004)
Insertion pitch
F
NRS5010
0.3±0.1
(0.012±0.004)
NRS5012
NRS5014
Tape thickness
T
5.25±0.1
(0.207±0.004)
5.25±0.1
(0.207±0.004)
5.15±0.1
(0.203±0.004)
5.15±0.1
(0.203±0.004)
5.15±0.1
(0.203±0.004)
5.15±0.1
(0.203±0.004)
NRS5020
NRS5024
NRS5030
NR 5040
NRS5040
8.0±0.1
(0.315±0.004)
NRS6010
NR 6012
NRS6012
NRS6014
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
0.4±0.1
(0.016±0.004)
6.3±0.1
(0.248±0.004)
6.3±0.1
(0.248±0.004)
K
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
2.1±0.1
(0.083±0.004)
1.4±0.1
(0.055±0.004)
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
2.3±0.1
(0.091±0.004)
2.7±0.1
(0.106±0.004)
3.2±0.1
(0.126±0.004)
4.2±0.1
(0.165±0.004)
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
1.6±0.1
(0.063±0.004)
2.3±0.1
(0.090±0.004)
3.1±0.1
(0.122±0.004)
4.7±0.1
(0.185±0.004)
Unit:mm(inch)
●Embossed tape 16mm wide (0.63 inches wide)
Type
NRS8030
NR 8040
NRS8040
A
Chip cavity
B
Insertion pitch
F
T
Tape thickness
8.3±0.1
(0.327±0.004)
8.3±0.1
(0.327±0.004)
12.0±0.1
(0.472±0.004)
0.5±0.1
(0.020±0.004)
K
3.4±0.1
(0.134±0.004)
4.5±0.1
(0.177±0.004)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
④Leader and Blank portion
●NR, NRH, NRS, NRV
⑤Reel size
Type
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NRS5010
NRS5012
NRS5014
NRS5020
NRS5030
NRS6010
NR 6012
NRS6012
NRS6014
φD
Reel size (Reference values)
φd
W
180±0.5
(7.087±0.019)
60±1.0
(2.36±0.04)
10.0±1.5
(0.394±0.059)
180±3.0
(7.087±0.118)
60±2.0
(2.36±0.08)
14.0±1.5
(0.551±0.059)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
Type
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS5024
NR 5040
NRS5040
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
NRS8030
NR 8040
NRS8040
φD
330±3.0
(12.99±0.118)
Reel size (Reference values)
φd
t(max.)
80±2.0
(3.15±0.078)
W
18.5
(0.72)
13.5±1.0
(0.531±0.04)
22.5
(0.89)
17.5±1.0
(0.689±0.04)
Unit:mm(inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
SMD inductor (NR□, NS series)
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRS20, NRV20/30,
NRH24/30 Type
-25~+120℃
NRS40/50/60/80 Type
-25~+125℃
NR10050 Type
-25~+105℃
NS101, NS125 Type
-40~+125℃
Including self-generated heat
2. Storage Temperature Range
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-40~+85℃
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type:
-5 to 40℃ for the product with taping.
3. Rated current
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
4. Inductance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
Measuring equipment
: LCR Meter (HP 4285A or equivalent)
Measuring frequency
: Specified frequency
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Measuring equipment
: LCR Meter (HP 4285A or equivalent)
Measuring frequency
: 100kHz, 1V
NR10050 Type :
Measuring equipment
: LCR Meter (HP 4263A or equivalent)
Measuring frequency
: 100kHz, 1V
:
5. DC Resistance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
Measuring equipment
: DC ohmmeter (HIOKI 3227 or equivalent)
6. Self resonance frequency
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
Specified Value
NS101, NS125 Type
Test Methods and
Remarks
Within the specified tolerance
NR10050 Type
-
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type :
Measuring equipment
: Impedance analyzer/material analyzer(HP4291A or equivalent HP4191A, 4192A or equivalent)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
7. Temperature characteristic
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Inductance change : Within ±20%
NR10050 Type
NS101, NS125 Type
Inductance change : Within ±15%
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within -25℃~+85℃.
With reference to inductance value at +20℃., change rate shall be calculated.
Test Methods and
Remarks
NS101, NS125 Type :
Measurement of inductance shall be taken at temperature range within -40℃~+125℃.
With reference to inductance value at +20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Step
Temperature(℃)
1
20
2
Minimum operating temperature
3
20 (Standard temperature)
4
Maximum operating temperature
5
20
8. Resistance to flexure of substrate
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
No damage
NR10050 Type
-
NS101, NS125 Type
No damage
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating
until deflection of the test board reaches to 2 mm.
Test board size
: 100×40×1.0
Test board material
: glass epoxy-resin
Solder cream thickness
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm(NR40/50/60/80, NRS40/50/60, NS101/125Type)
Test Methods and
Remarks
Land dimension
C
A
B
A
Type
NRS20, NRV20
NRH24
NR30, NRV30, NRH30
NR40, NRS40
NR50, NRS50
NR60, NRS60
NR80, NRS80
A
0.65
0.7
0.8
1.2
1.5
1.6
1.8
B
0.7
0.75
1.4
1.6
2.1
3.1
3.8
C
2.0
2.0
2.7
3.7
4.0
5.7
7.5
Type
NS101
NS125
A
2.5
2.5
B
5.6
8.6
C
3.2
3.2
9. Insulation resistance : between wires
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
-
NS101, NS125 Type
10. Insulation resistance : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
-
NS101, NS125 Type
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
11. Withstanding voltage : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-
NR10050 Type
NS101, NS125 Type
12. Adhesion of terminal electrode
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Shall not come off PC board
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Applied force
: 10N to X and Y directions.
Duration
: 5s.
Solder cream thickness
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm (NR40/50/60/80, NRS40/50/60, NS101/125Type)
NR10050 Type :
Applied force
: 5N to X and Y directions.
Duration
: 5s.
13. Resistance to vibration
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Test Methods and
Remarks
Frequency Range
Total Amplitude
Sweeping Method
Time
10~55Hz
1.5mm (May not exceed acceleration 196m/s2)
10Hz to 55Hz to 10Hz for 1min.
X
Y
For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
14. Solderability
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
At least 90% of surface of terminal electrode is covered by new solder.
NS101, NS125 Type
Test Methods and
Remarks
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Solder Temperature
245±5℃
Time
5±1.0 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
15. Resistance to soldering heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type
Test board material
: glass epoxy-resin
Test board thickness : 1.0mm
NR10050 Type
Test board material
: glass epoxy-resin
Test board thickness : 1.6mm
16. Thermal shock
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified
time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step
Temperature (℃)
Duration (min)
1
-40±3
30±3
2
Room temperature
Within 3
3
+85±2
30±3
4
Room temperature
Within 3
17. Damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Test Methods and
Remarks
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
-
NS101, NS125 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
60±2℃
Humidity
90~95%RH
Time
500+24/-0 hour
18. Loading under damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current
continuously as shown in below table.
Temperature
60±2℃
Humidity
90~95%RH
Applied current
Rated current
Time
500+24/-0 hour
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
19. Low temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown
in below table.
Temperature
-40±2℃
Time
500+24/-0 hour
20. High temperature life test
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
-
NR10050 Type
-
NS101, NS125 Type
-
NR10050 Type :
Temperature
105±3℃
Time
500+24/-0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
21. Loading at high temperature life test
Specified Value
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
-
NS101, NS125 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Temperature
85±2℃
Applied current
Rated current
Time
500+24/-0 hour
22. Standard condition
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
NS101, NS125 Type
Standard test condition :
Unless otherwise specified, temperature is 20±15℃ and 65±20%of
relative humidity.
When there is any question concerning measurement result: In order to
provide correlation data, the test shall be condition of 20±2℃ of
temperature, 65±5% relative humidity.
Inductance is in accordance with our measured value.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
SMD inductor (NR□, NS series)
■PRECAUTIONS
1. Circuit Design
Precautions
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions
Technical
considerations
◆Land pattern design
1. Please refer to a recommended land pattern.
◆Land pattern design
Surface Mounting
・ Mounting and soldering conditions should be checked beforehand.
・ Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement
Precautions
Technical
considerations
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. The product shall be used reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, soldering etc sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・ Put the soldering iron on the land-pattern.
・ Soldering iron's temperature - Below 350℃
・ Duration - 3 seconds or less
・ The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
・NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Recommended reflow condition (Pb free solder)
Technical
considerations
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
◆Cleaning conditions
1. If washed by supersonic waves, the products might be broken.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E02R01
6. Handling
Precautions
Technical
considerations
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards (splitting along perforations)
1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.
7. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・ Recommended conditions
Ambient temperature : -5~40℃
Humidity : Below 70% RH
・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical
considerations
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E02R01
Similar pages