Willow DG38B-1021-30-5120 Pcb and industrial power relay Datasheet

DG38B
pcb & industrial power relay
• Up to 40A /240VAC continuous rating
• 110VDC maximum switching voltage
• Industry standard style
• Cost effective
• RoHS Compliant
E325835
Contacts
Contact number & arrangement
SPST-NO (1 Normally Open); SPDT ( 1 Changeover)
Contact material
AgSnO2 (standard), AgCdO
Max. switching voltage
AgSnO2: 250VAC / 110VDC
AgCdO : 250VAC / 30VDC
Min. switching current / voltage
500mA/12VDC (AgCdO, AgSnO2)
Max. continuous current
AgSnO2: SPST-NO: 40A / SPDT: 40A (NO), 30A (NC)
AgCdO : SPST-NO: 30A / SPDT: 30A (NO), 20A (NC)
Max. switching current
AgSnO2: SPST-NO: 40A / SPDT: 40A (NO), 30A (NC)
Max. switching power
AgSnO2: 7200VA / 1100W :: AgCdO: 6000VA / 560W
Initial resistance
≤ 100mΩ, max. at 0.1A/6VDC
Coil
Rated voltage
3...110VDC; 12...220VAC
Must release voltage
DC ≥ 0.1Un; AC ≥ 0.3Un
Operating range of supply voltage
See coil tables 1 & 2
Rated power consumption
0.93W (DC), 1.2VA (AC)
Insulation
Insulation resistance
>100MΩ at 500VDC, 50%RH
Dielectric strength
coil to contact 4000Vrms, 1min (50Hz)
between open contacts 1500Vrms, 1min (50Hz)
General Data
Operating time (typical)
ms 15
Release time (typical)
ms 10
Electrical Life
ops 1 x 105
Mechanical life
ops 1 x 106
Dimensions
Weight
L x W x H 32.5 x 27.6 x 20.2mm (covered)
≤ 36g
Ambient temperature
storage -40 to 155°C
operating -40 to 125°C
Shock resistance
Functional: 10g 11mS; Destructive: 100g
Drop resistance
1M height drop on to concrete (sealed type only)
Vibration resistance
10-55Hz: DA 1.5mm
Page 1 of 3
Ref: DG38B 022916JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DG38B
pcb & industrial power relay
Coil Data
Table 1
DC Coil
Nominal Operating Power
Must operate
voltage max.
(VDC)
Max. allowable
voltage (VDC)
Must release
voltage min.
(VDC)
Coil Voltage
Code
Nominal Voltage
(VDC)
Coil Resistance
(Ω) ±10%
1003
3
10
2.25
0.30
1005
5
28
3.75
0.50
1006
6
40
4.50
0.60
1009
9
90
1012
12
160
6.75
1018
18
360
13.50
1024
24
640
18.00
2.40
1048
48
2,560
36.00
4.80
1110
110
13,445
82.50
11.00
0.93W
130%
of nominal
9.00
0.90
1.20
1.80
UL Class F insulation as standard
AC Coil
Coil Resistance
(Ω) ±10%
Nominal Operating Power
Must operate
voltage max.
(VAC)
Coil Voltage
Code
Nominal Voltage
(VAC)
5012
12
27
9.00
5024
24
120
18.00
5110
110
2,360
5120
120
3,040
1.2VA
90.00
5220
220
13,490
165.00
Max. allowable
voltage (VAC)
Must release
voltage min.
(VAC)
3.60
130%
of nominal
82.50
7.20
33.00
36.00
66.00
UL Class F insulation as standard
Overall Dimensions
Fig. 1
PCB Mounting Dimensions
Fig. 2
*
-
Bottom View (* see note 2 )
Wiring Diagrams
NO
Fig. 3
NC**
COM
** Not fitted for SPST-NO version
All dimensions in mm
Page 2 of 3
Ref: DG38B 022916JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DG38B
pcb & industrial power relay
Ordering codes
Contact
Material
Type
D
G
3
8
B
Contact
arrangement
-
Cover protection and
mounting
-
Coil code
-
Contact Material
10
-
AgCdO (30A/20A)
30
-
AgSnO2 (40A/30A)
see Table 1
Contact Arrangement
11
-
SPDT ( 1 Changeover)
21
-
SPST-NO (1 Normally open)
Cover Protection Category
3
-
Covered, sealed. IP67
7
-
Covered, dust cover
Terminations and mounting
0
-
PCB mount + QC Terminals for contacts
Notes:
1) All parameters, unless otherwise specified, are measured at an ambient temperature of 23°C.
2) PCB Mounting Holes - the “*” hole is not needed for the SPST-NO version.
3) At an ambient temperature of 85°C, the maximum allowable coil voltage should be reduced to 72%.
4) Electrical life obtained at resistive or inductive load at 30A/15VDC with suitable arc suppression attached and with an operating frequency of 1 op/sec.
Page 3 of 3
Ref: DG38B 022916JHM
American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
Similar pages