NTD18N06 Power MOSFET 18 Amps, 60 Volts N−Channel DPAK Designed for low voltage, high speed switching applications in power supplies, converters and power motor controls and bridge circuits. Features http://onsemi.com V(BR)DSS RDS(on) TYP 60 V • Pb−Free Packages are Available D Power Supplies Converters Power Motor Controls Bridge Circuits G MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) S Value Unit Drain−to−Source Voltage VDSS 60 Vdc Drain−to−Gate Voltage (RGS = 10 MW) VDGR 60 Vdc VGS VGS "20 "30 ID ID 18 10 54 Adc PD 55 0.36 2.1 W W/°C W Operating and Storage Temperature Range TJ, Tstg −55 to +175 °C Single Pulse Drain−to−Source Avalanche Energy − Starting TJ = 25°C (VDD = 50 Vdc, VGS = 5.0 Vdc, L = 1.0 mH, IL(pk) = 12 A, VDS = 60 Vdc) EAS 72 mJ RqJC RqJA RqJA 2.73 100 71.4 TL 260 Gate−to−Source Voltage − Continuous − Non−repetitive (tpv10 ms) Drain Current − Continuous @ TA = 25°C − Continuous @ TA = 100°C − Single Pulse (tpv10 ms) Total Power Dissipation @ TA = 25°C Derate above 25°C Total Power Dissipation @ TA = 25°C (Note 2) Thermal Resistance − Junction−to−Case − Junction−to−Ambient (Note 1) − Junction−to−Ambient (Note 2) Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds Vdc IDM March, 2006 − Rev. 2 4 Drain 4 1 2 Apk °C/W °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. When surface mounted to an FR−4 board using the minimum recommended pad size. 2. When surface mounted to an FR−4 board using the 0.5 sq in drain pad size. © Semiconductor Components Industries, LLC, 2006 MARKING DIAGRAMS 1 3 DPAK CASE 369C STYLE 2 YWW 18 N06G Symbol 2 1 3 Drain Gate Source 4 Drain 4 1 2 DPAK−3 CASE 369D STYLE 2 YWW 18 N06G Rating 18 A N−Channel Typical Applications • • • • ID MAX 51 mW 3 1 2 3 Gate Drain Source 18N06 Y WW G = Device Code = Year = Work Week = Pb−Free Device ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. Publication Order Number: NTD18N06/D NTD18N06 ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit 60 − 70.8 68.8 − − Vdc mV/°C − − − − 1.0 10 − − ±100 nAdc 2.0 − 3.1 7.0 4.0 − Vdc mV/°C − 51 60 − − 0.91 0.85 1.3 − gFS − 10.1 − mhos pF OFF CHARACTERISTICS V(BR)DSS Drain−to−Source Breakdown Voltage (Note 3) (VGS = 0 Vdc, ID = 250 mAdc) Temperature Coefficient (Positive) Zero Gate Voltage Drain Current (VDS = 60 Vdc, VGS = 0 Vdc) (VDS = 60 Vdc, VGS = 0 Vdc, TJ = 150°C) IDSS Gate−Body Leakage Current (VGS = ± 20 Vdc, VDS = 0 Vdc) IGSS mAdc ON CHARACTERISTICS (Note 3) Gate Threshold Voltage (Note 3) (VDS = VGS, ID = 250 mAdc) Threshold Temperature Coefficient (Negative) VGS(th) Static Drain−to−Source On−Resistance (Note 3) (VGS = 10 Vdc, ID = 9.0 Adc) RDS(on) Static Drain−to−Source On−Resistance (Note 3) (VGS = 10 Vdc, ID = 18 Adc) (VGS = 10 Vdc, ID = 9.0 Adc, TJ = 150°C) VDS(on) Forward Transconductance (Note 3) (VDS = 7.0 Vdc, ID = 9.0 Adc) mW Vdc DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance (VDS = 25 Vdc, VGS = 0 Vdc, f = 1.0 MHz) Transfer Capacitance Ciss − 509 710 Coss − 162 230 Crss − 47 100 td(on) − 12 25 tr − 23 50 td(off) − 19 40 tf − 20 40 QT − 15.3 30 Q1 − 3.2 − Q2 − 7.3 − VSD − − 0.98 0.87 1.15 − Vdc trr − 42 − ns ta − 31 − tb − 11 − QRR − 0.066 − SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time (VDD = 30 Vdc, ID = 18 Adc, VGS = 10 Vdc, RG = 9.1 W) (Note 3) Fall Time Gate Charge (VDS = 48 Vdc, ID = 18 Adc, VGS = 10 Vdc) (Note 3) ns nC SOURCE−DRAIN DIODE CHARACTERISTICS Forward On−Voltage (IS = 18 Adc, VGS = 0 Vdc) (Note 3) (IS = 18 Adc, VGS = 0 Vdc, TJ = 150°C) Reverse Recovery Time (IS = 18 Adc, VGS = 0 Vdc, dIS/dt = 100 A/ms) (Note 3) Reverse Recovery Stored Charge 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 mC NTD18N06 40 VDS ≥ 10 V 7V ID, DRAIN CURRENT (AMPS) ID, DRAIN CURRENT (AMPS) VGS = 10 V 9V 30 6.5 V 8V 6V 20 5.5 V 10 5V 0 0.12 1 3 2 4 TJ = 100°C 3.8 TJ = −55°C 4.6 5.4 7 6.2 Figure 2. Transfer Characteristics VGS = 10 V TJ = 100°C TJ = 25°C 0.04 TJ = −55°C 0.02 0 10 20 40 30 0.12 7.8 VGS = 15 V 0.1 TJ = 100°C 0.08 0.06 TJ = 25°C 0.04 TJ = −55°C 0.02 0 0 10 20 30 40 ID, DRAIN CURRENT (AMPS) ID, DRAIN CURRENT (AMPS) Figure 3. On−Resistance versus Gate−to−Source Voltage Figure 4. On−Resistance versus Drain Current and Gate Voltage 1000 ID = 9 A VGS = 10 V VGS = 0 V TJ = 150°C IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) TJ = 25°C Figure 1. On−Region Characteristics 0.06 1.8 10 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) 0.08 2 20 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 0.1 0 30 0 3 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 40 1.6 1.4 1.2 1 100 10 TJ = 100°C 0.8 0.6 −50 −25 0 25 50 75 100 125 150 175 1 0 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current versus Voltage http://onsemi.com 3 60 NTD18N06 POWER MOSFET SWITCHING Switching behavior is most easily modeled and predicted by recognizing that the power MOSFET is charge controlled. The lengths of various switching intervals (Dt) are determined by how fast the FET input capacitance can be charged by current from the generator. The published capacitance data is difficult to use for calculating rise and fall because drain−gate capacitance varies greatly with applied voltage. Accordingly, gate charge data is used. In most cases, a satisfactory estimate of average input current (IG(AV)) can be made from a rudimentary analysis of the drive circuit so that t = Q/IG(AV) The capacitance (Ciss) is read from the capacitance curve at a voltage corresponding to the off−state condition when calculating td(on) and is read at a voltage corresponding to the on−state when calculating td(off). At high switching speeds, parasitic circuit elements complicate the analysis. The inductance of the MOSFET source lead, inside the package and in the circuit wiring which is common to both the drain and gate current paths, produces a voltage at the source which reduces the gate drive current. The voltage is determined by Ldi/dt, but since di/dt is a function of drain current, the mathematical solution is complex. The MOSFET output capacitance also complicates the mathematics. And finally, MOSFETs have finite internal gate resistance which effectively adds to the resistance of the driving source, but the internal resistance is difficult to measure and, consequently, is not specified. The resistive switching time variation versus gate resistance (Figure 9) shows how typical switching performance is affected by the parasitic circuit elements. If the parasitics were not present, the slope of the curves would maintain a value of unity regardless of the switching speed. The circuit used to obtain the data is constructed to minimize common inductance in the drain and gate circuit loops and is believed readily achievable with board mounted components. Most power electronic loads are inductive; the data in the figure is taken with a resistive load, which approximates an optimally snubbed inductive load. Power MOSFETs may be safely operated into an inductive load; however, snubbing reduces switching losses. During the rise and fall time interval when switching a resistive load, VGS remains virtually constant at a level known as the plateau voltage, VSGP. Therefore, rise and fall times may be approximated by the following: tr = Q2 x RG/(VGG − VGSP) tf = Q2 x RG/VGSP where VGG = the gate drive voltage, which varies from zero to VGG RG = the gate drive resistance and Q2 and VGSP are read from the gate charge curve. During the turn−on and turn−off delay times, gate current is not constant. The simplest calculation uses appropriate values from the capacitance curves in a standard equation for voltage change in an RC network. The equations are: td(on) = RG Ciss In [VGG/(VGG − VGSP)] td(off) = RG Ciss In (VGG/VGSP) 1400 C, CAPACITANCE (pF) 1200 VDS = 0 V VGS = 0 V TJ = 25°C Ciss 1000 800 Crss 600 Ciss 400 Coss 200 0 Crss 10 5 VGS 0 VDS 10 5 15 20 25 GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 7. Capacitance Variation http://onsemi.com 4 1000 12 QT 10 VGS 8 Q1 6 t, TIME (ns) VGS , GATE−TO−SOURCE VOLTAGE (VOLTS) NTD18N06 Q2 4 2 0 100 td(off) tr 10 td(on) VDS = 30 V ID = 18 A VGS = 10 V ID = 18 A TJ = 25°C 0 4 8 12 QG, TOTAL GATE CHARGE (nC) tf 1 16 1 Figure 8. Gate−To−Source and Drain−To−Source Voltage versus Total Charge 10 RG, GATE RESISTANCE (W) 100 Figure 9. Resistive Switching Time Variation versus Gate Resistance DRAIN−TO−SOURCE DIODE CHARACTERISTICS IS, SOURCE CURRENT (AMPS) 20 VGS = 0 V TJ = 25°C 16 12 8 4 0 0.6 0.84 0.92 0.68 0.76 VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) 1 Figure 10. Diode Forward Voltage versus Current SAFE OPERATING AREA reliable operation, the stored energy from circuit inductance dissipated in the transistor while in avalanche must be less than the rated limit and adjusted for operating conditions differing from those specified. Although industry practice is to rate in terms of energy, avalanche energy capability is not a constant. The energy rating decreases non−linearly with an increase of peak current in avalanche and peak junction temperature. Although many E−FETs can withstand the stress of drain−to−source avalanche at currents up to rated pulsed current (IDM), the energy rating is specified at rated continuous current (ID), in accordance with industry custom. The energy rating must be derated for temperature as shown in the accompanying graph (Figure 12). Maximum energy at currents below rated continuous ID can safely be assumed to equal the values indicated. The Forward Biased Safe Operating Area curves define the maximum simultaneous drain−to−source voltage and drain current that a transistor can handle safely when it is forward biased. Curves are based upon maximum peak junction temperature and a case temperature (TC) of 25°C. Peak repetitive pulsed power limits are determined by using the thermal response data in conjunction with the procedures discussed in AN569, “Transient Thermal Resistance − General Data and Its Use.” Switching between the off−state and the on−state may traverse any load line provided neither rated peak current (IDM) nor rated voltage (VDSS) is exceeded and the transition time (tr,tf) do not exceed 10 ms. In addition the total power averaged over a complete switching cycle must not exceed (TJ(MAX) − TC)/(RqJC). A Power MOSFET designated E−FET can be safely used in switching circuits with unclamped inductive loads. For http://onsemi.com 5 NTD18N06 I D, DRAIN CURRENT (AMPS) 100 VGS = 20 V SINGLE PULSE TC = 25°C 10 ms 10 100 ms 1 ms 10 ms 1 0.1 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0.1 dc RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 1 10 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 100 EAS , SINGLE PULSE DRAIN−TO−SOURCE AVALANCHE ENERGY (mJ) SAFE OPERATING AREA 80 ID = 12 A 60 40 20 0 Figure 11. Maximum Rated Forward Biased Safe Operating Area 1.0 25 50 75 100 125 150 175 TJ, STARTING JUNCTION TEMPERATURE (°C) Figure 12. Maximum Avalanche Energy versus Starting Junction Temperature D = 0.5 0.2 0.1 0.1 P(pk) 0.05 0.02 0.01 t1 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.01 1.0E−05 1.0E−04 1.0E−03 1.0E−02 t, TIME (ms) RqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) − TC = P(pk) RqJC(t) 1.0E−01 Figure 13. Thermal Response di/dt IS trr ta tb TIME 0.25 IS tp IS Figure 14. Diode Reverse Recovery Waveform http://onsemi.com 6 1.0E+00 1.0E+01 NTD18N06 ORDERING INFORMATION Package Shipping† DPAK 75 Units/Rail NTD18N06G DPAK (Pb−Free) 75 Units/Rail NTD18N06−1 DPAK−3 75 Units/Rail DPAK−3 (Pb−Free) 75 Units/Rail DPAK 2500 Tape & Reel DPAK (Pb−Free) 2500 Tape & Reel Device NTD18N06 NTD18N06−1G NTD18N06T4 NTD18N06T4G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 7 NTD18N06 PACKAGE DIMENSIONS DPAK CASE 369C−01 ISSUE O SEATING PLANE −T− C B V E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 8 MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− NTD18N06 PACKAGE DIMENSIONS DPAK−3 CASE 369D−01 ISSUE B C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 Z A S 1 2 3 −T− SEATING PLANE K J F D G H 3 PL 0.13 (0.005) M DIM A B C D E F G H J K R S V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 −−− STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN T ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 9 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. NTD18N06/D