MTRONPTI M61828KFCN 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 v, hcmos or clipped sine wave precision tcxo/tcvcxo Datasheet

M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Product Features
• Tight stability performance
(±0.2 ppm) over Industrial Temperatures (-40 °C to +85 °C)
(±0.1 ppm) over Commercial Temperatures (0 °C to 70 °C)
• 3.0 V, 3.3 V and 5.0 V versions
• Low phase noise performance
• Tristate Function standard
Product Description
MtronPTI’s M618x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (down to ±0.10 ppm) over temperature and time. Specially processed crystals enable the
M618x to achieve consistent long-term stability and minimal frequency shift after reflow. The low phase noise (-155 dBc/
Hz at 100 kHz) makes the M618x ideal for the design engineer working on all types of systems as the reference timing
source.
Product Applications
The M618x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation
and land mobile radio. Standard output for the M618x series is HCMOS compatible or clipped sine wave. The product is
ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13
MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive
applications. The M618x series offers ±10 ppm minimum pull range with excellent tuning linearity performance for critical
PLL applications. This series is available in selective frequencies from 8 MHz to 52 MHz.
Product Ordering Information
M6180Sxxx, M6181Sxxx, M6182Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Rev: 01/28/2013
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Performance Characteristics
Parameter
Electrical Specifications
Frequency Range
Operating Temperature
Storage Temperature
Frequency Tolerance @ +25 °C
Frequency Stability
Stability vs. Reflow
Frequency vs. Supply
Frequency vs. Load
Aging (First Year)
Aging (First Year)
Aging (10 Year)
Aging (10 Year)
Supply Voltage
Supply Current
(Reference to VDD = 3.3 V)
Output Logic Levels
(HCMOS)
Output Level
(Clipped Sine Wave)
Symmetry (Duty Cycle)
Rise/Fall Time
Output Load
Symbol
FO
TA
TSTG
∆F/F
∆FT/F
Typ.
Max.
8
52
(See Ordering Information)
-55
+125
-1.0
+1.0
(See Ordering Information)
-1.0
∆FVDD/F
∆FLOAD/F
VDD
IDD
VOL
VOH
VOUT
VOUT
tDC
tR/tF
+1.0
±0.1
±0.1
-1.0
+1.0
-2.0
+2.0
-3.0
+3.0
-5.0
+5.0
(See Ordering Information)
±0.02
±0.02
2.0
3.0
5.5
1.3
1.7
2.8
3.0
4.0
6.5
1.9
2.3
3.5
20
80
1.0
0.8
40
50
Units
MHz
°C
°C
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
V
mA
mA
mA
mA
mA
mA
% VDD
% VDD
Vpk-pk
Vpk-pk
60
6.5
%
ns
+10
2.7
3.0
4.5
+50
ppm
V
V
V
µA
kΩ
%
15 pF
10 kΩ || 10 pF
Frequency Adjustment
Control Voltage Range
-10
0.3
0.3
0.5
-50
100
Input Leakage Current
Input Resistance
Linearity
Modulation Bandwidth
Tristate Function
1.50
1.65
2.50
5
2 kHz
70
Tristate Leakage Current
Phase Noise
(Typical 12.8 MHz HCMOS @ 3.3 V)
Environmental
Min.
30
+100
-100
-101
-130
-149
-155
-156
% VDD
% VDD
µA
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Conditions/Notes
For TCXO only
(FMAX - FMIN)/2
For ±5% supply voltage variation
For ±5% load variation
F0 ≤ 20 MHz
F0 > 20 MHz
F0 ≤ 20 MHz (includes first year)
F0 > 20 MHz (includes first year
±5% voltage tolerance
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 52 MHz
Clipped Sine Wave output at 13 MHz
Clipped Sine Wave output at 26 MHz
Clipped Sine Wave output at 52 MHz
IOH/IOL = ±4 mA, VDD = +3.0 V
IOH/IOL = ±4 mA, VDD = +3.0 V
F0 ≤ 40 MHz
F0 > 40 MHz
Ref. to ½ VDD HCMOS Only
Ref. 10% to 90% HCMOS only
HCMOS Output
Clipped Sine Wave Output
Over Control Voltage Range
For VDD = 3.0 V
For VDD = 3.3 V
For VDD = 5.0 V
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
@ 10 Hz Offset
@ 100 Hz Offset
@ 1 kHz Offset
@ 10 kHz Offset
@ 100 kHz Offset
Shock
MIL-STD-202, Method 213, Condition C (100 g)
Vibration
MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz)
Solderability
EIAJ-STD-002
Package
3.2 mm x 5.0 mm x 1.58 mm, SMT (RoHS Compliant)
Max Soldering Conditions
See solder profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Phase Noise Plot
M618x 12.8 MHz Phase Noise
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Product Dimension & Pinout Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Handling Information
Although protection circuitry has been designed into the M618x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Model
ESD Threshold, Minimum
Human Body
1500*
Charged Device
1500*
* MIL-STD-833D, Method 3015, Class 1
Unit
V
V
ATTENTION
Static Sensitive Devices
Handle only at Static
Safe Work Stations
Typical Test Circuits
Test Circuit - N Package
With Tristate
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Tape & Reel Specifications
(all measurements
are in mm)
M618x
A
B
C
D
E
F
G
H
J
K
L
M
N
3.6
5.4
1.5
5.5
1.9
4
8
12
180
13
20.2
60
12
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Quality Parameters
Test
Electrical Characteristics
Frequency vs. Temperature
Mechanical Shock
Vibration
Thermal Cycle
Aging
Gross Leak
Fine Leak
Solderability
Resistance to Solvents
Physical Dimensions
Internal Visual
Environmental Specifications/Qualification Testing Performed
Test Method
Test Condition
Internal Specification
Per Specification
Internal Specification
Per Specification
MIL-STD-202, Method 213, C
100 g’s
MIL-STD-202, Method 201-204
10 g’s from 10-2000 Hz
MIL-STD-883, Method 1010, B
-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles
Internal Specification
168 Hours at 105 Degrees C
MIL-STD-202, Method 112
30 Second Immersion
MIL-STD-202, Method 112
Must meet 1x10-8
MIL-STD-883, Method 2003
8 Hour Steam Age – Must Exhibit 95% coverage
MIL-STD-883, Method 2015
Three 1 minute soaks
MIL-STD-883, Method 2016
Per Specification
Internal Specification
Per Internal Specification
Load Circuit
Load Circuit #7 - Clipped Sine Wave Output
Load Circuit #2 - HCMOS Output
DUT Output
DUT Output
Test Point
Test Point
10K Ohms
C Load
10 pF
Note: C Load includes probe and fixturing.
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7
Similar pages