POWER DCH5 Series 5 Watts Data Sheet Total Power: 5 Watts Input Voltage: 100 - 240 Vac # of Outputs: Single DCH5-050UK SPECIAL FEATURES USB Switching wallmount power supply Universal AC input Available in various country AC plugs CE Mark EMC & LVD & ErP 2011 Regulated output Overload and short circuit protection Constant voltage, constant current Energy Star Efficiency Level V Eup compliant Built in EMI filter (CISPR 22 Class B) Cable less with - USB-A receptacle SAFETY UL + cUL TUV NEMKO NSW C-Tick CE 60950-1 60950-1 60950-1 60950-1 60950-1 EMC & LVD & ErP 2011 for EU & UK versions DCH5-050AU DCH5-050EU DCH5-050US Electrical Specifications Input Input range: 100 - 240 Vac (wide range) Frequency: EMI/RFI: 47 - 63 Hz Safety ground leakage current: 20 μA @ 60 Hz, 264 Vac input FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC Output Voltage (Vo): 5 V (4.75 - 5.25 V) Maximum Power (Po): 5W Hold-up time: 10 ms. typical at full load @ 115 Vac/60 Hz Overvoltage protection: 7 V max. Latching type Overload protection: Output short circuit protection auto recover Overload protected 110 - 150% above maximum rating Output: USB Type A receptacle Connector Pinout: Pin 1: +V, Pin 2 and Pin 3 connected together Pin 4: Ground Environmental Specifications Operating temperature: 0° to 40 °C ambient Storage temperature: -20 °C to +70 °C Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 DCH5 Series Data Sheet Ordering Information Model Number Maximum Power Output Voltage Minimum Load Maximum Load Ripple P/P (PARD)1 Connector DCH5-050US 5W 5V 0 1A 200 mV USB-A DCH5-050EU 5W 5V 0 1A 200 mV USB-A DCH5-050UK 5W 5V 0 1A 200 mV USB-A DCH5-050AU 5W 5V 0 1A 200 mV USB-A 1. Peak-to-peak with 20 mHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be grounded for EMI purpose. Mechanical Drawing 1.4” (35.55) 1.0” (25.53) 1.88” (47.87) DCH5-050US 1.4” (35.55) 1.0” (25.53) 0.72” (18.3) 1.88” (47.87) DCH5-050EU DCH5 Series Data Sheet Mechanical Drawing DCH5-050UK 1.74” (44.2) 0.3” (7.75) 1.0” (25.53) 1.88” (47.87) 1.4” (35.55) 1.95” (49.53) DCH5-050AU 0.35” (9) 1.63” (41.3) 1.0” (25.53) 1.88” (47.87) 1.4” (35.55) DCH5 Series Data Sheet Pin Assignments PIN 1 (Vout) 1 2 3 4 PIN 4 (GROUND) Connected Together Pin Numbers Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Warranty: 2 years 4. Weight: 0.144 lb./0.066kg. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] DCH5 Series-DS 06.06.14