Vishay GI2401-E3-45 Dual common-cathode ultrafast plastic rectifier Datasheet

GI2401 thru GI2404
Vishay General Semiconductor
Dual Common-Cathode Ultrafast Plastic Rectifier
FEATURES
• Glass passivated chip junction
TO-220AB
• Ultrafast recovery time
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 260 °C, 40 s
3
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
2
1
PIN 1
PIN 2
PIN 3
CASE
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes,
dc-to-dc converters, and other power switching
application.
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
16 A
VRRM
50 V to 200 V
IFSM
125 A
Epoxy meets UL 94V-0 flammability rating
trr
35 ns
VF
0.895 V
TJ max.
150 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Case: TO-220AB
Polarity: As marked
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
GI2401
GI2402
GI2403
GI2404
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
V
Maximum RMS voltage
VRMS
35
70
105
140
V
Maximum DC blocking voltage
VDC
50
100
150
200
V
Maximum average forward rectified current at TC = 100 °C
IF(AV)
16
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
IFSM
125
A
TJ, TSTG
- 65 to + 150
°C
Operating junction and storage temperature range
Document Number: 88624
Revision: 30-Aug-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
GI2401 thru GI2404
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward voltage
per diode
IF = 4 A
IF = 8 A
IF = 4 A
IF = 8 A
Maximum DC reverse current at rated
DC blocking voltage per diode
SYMBOL
TJ = 25 °C
TJ = 25 °C
TJ = 100 °C
TJ = 100 °C
VF
TC = 25 °C
TC = 100 °C
IR
GI2401
GI2402
GI2403
GI2404
UNIT
0.900
0.975
0.800
0.895
V
50
150
5.0
500
µA
Maximum reverse recovery time
per diode
IF = 0 .5 A, IR = 1.0 A,
Irr = 0.25A
trr
35
ns
Typical junction capacitance per diode
4.0 V, 1 MHz
CJ
85
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
GI2401
GI2402
RθJA
RθJC
Typical thermal resistance per diode (1)
GI2403
GI2404
UNIT
16
2.2
°C/W
Note:
(1) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
TO-220AB
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.85
45
50/tube
Tube
1.85
45
50/tube
Tube
GI2401-E3/45
TO-220AB
GI2401HE3/45
(1)
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
150
Resistive or Inductive Load
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
20
16
Infinite Heatsink, TC
12
8
Ambient Air Rating, TA
4
TC = 125 °C
8.3 ms Single Half Sine-Wave
125
100
75
50
25
0
0
0
25
50
75
100
125
150
1
10
100
Case Temperature (°C)
Number of Cycles at 60 Hz
Figure 1. Maximum Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward
Surge Current Per Diode
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88624
Revision: 30-Aug-07
GI2401 thru GI2404
Vishay General Semiconductor
1000
TJ = 125 °C
TJ = 25 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
Pulse Width = 300 µs
1 % Duty Cycle
1
0.1
0.01
0.2
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
10
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics Per Diode
Figure 5. Typical Junction Capacitance Per Diode
Instantaneous Reverse Leakage
Current (µA)
100
TJ = 125 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Typical Reverse Leakage Characteristics Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
2
0.635 (16.13)
0.625 (15.87)
3
0.160 (4.06)
0.140 (3.56)
0.104 (2.65)
0.096 (2.45)
Document Number: 88624
Revision: 30-Aug-07
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.603 (15.32)
0.573 (14.55)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages