NICHIA NDB4116-E Blue laser diode Datasheet

[ UTZ-SC0284_5 ]
2012/10/02
Blue Laser Diode
NDB4116


Features
Outline Dimension
• Optical Output Power: CW 100mW
• Can Type: 5.6 mm Floating Mounted with Photo Diode and Zener Diode
Unit (mm)
(
Item
Symbol
Optical Output Power
Po
Absolute
Maximum Ratings
120
Allowable Reverse Current
Ir (LD)
85
mA
PD Reverse Voltage
Vr (PD)
5
V
Storage Temperature
Tstg
-40 ~ 85
C
Operating Case Temperature
Tc
-10 ~ 60
C
Φ
(90°)
Unit
Emitting Point
(0.4)
mW
Condition
Symbol
Min
Typ.
Optical Output Power
CW
Po
-
-
100
mW
Peak Wavelength
Po=100mW
p
440
445
450
nm
Threshold Current
CW
Ith
10
25
50
mA
Operating Current
Po=100mW
Iop
80
100
140
mA
Slope Efficiency
CW

0.8
1.3
1.8
W/A
Operating Voltage
Po=100mW
Vop
4.5
5.3
6.0
Parallel
Beam
Divergence* Perpendicular
Beam
Parallel
Pointing
Accuracy Perpendicular
Po=100mW
//
7.0
8.5
12.5
V
°
Po=100mW

17.0
23.5
25.0
°
Po=100mW
//
-2.5
-
2.5
°
Po=100mW

-3.0
-
3.0
°
Monitor Current**
Po=100mW
Im
0.2
1.0
2.0
mA
0.25±0.03
1.2±0.1
2.3±0.2
Φ 3.55±0.1
Glass Thickness
0.4±0.1
Z+
Φ 4.2±0.2
(Tc=25C)
Max Unit
Item
1.0±0.1
Emitting Point
(1.3)
Reference Plane
6.5±1.0
Initial Electrical/Optical Characteristics
0
+ .03
0
6 5.
1.
6
)
Φ
Absolute Maximum Ratings
4×Φ 0.43±0.08
3
X+
1
2
4
Φ 2.0±0.2
(Y+) are reference figures
Pin Connection
This model has a Zener Diode built in
as a protection circuit against static
electricity.
* Full angle at 50% from peak intensity
** Monitor Current is short time power reference purpose only. Not guaranteed for
accuracy.
All figures in this specification are measured by Nichia's method and may contain measurement deviations.
The above specifications are for reference purpose only and subjected to change without prior notice.
Safety of Laser light
 Laser Light can damage the human eyes and skin. Do not expose the eye or skin to any
laser light directly and/or through optical lens. When handling the LDs, wear appropriate
safety glasses to prevent laser light, even any reflections from entering to the eye. Focused
laser beam through optical instruments will increase the chance of eye hazard.
 These LDs are classified in Class 4 of IEC60825-1 and 21 CFR Part 1040.10 Safety
Standards. It is absolutely necessary to take overall safety measures against User's
modules, equipment and systems into which Nichia LDs are incorporated and/or integrated.
NICHIA CORPORATION
http://www.nichia.co.jp
 HEADQUARTERS
491 Oka, Kaminaka-Cho, Anan-Shi, TOKUSHIMA 774-8601, JAPAN
PHONE: +81-884-22-2311
FAX: +81-884-21-0148
 CONTACT
TOKYO SALES OFFICE
13F Tamachi Center Building 34-7, Shiba 5-Chome, Minato-Ku, TOKYO 108-0014, JAPAN
PHONE: +81-3-3456-3108
FAX: +81-3-5440-7330
-1-
[ UTZ-SC0284_5 ]
2012/10/02

Typical Characteristics
 Optical Output Power vs. Forward Current
 Forward Voltage vs. Forward Current
7
Tc=-10℃
Tc=20 ℃
Tc=40 ℃
Tc=60 ℃
100
80
6
Forward Voltage Vf [V]
Optical Output Power P o [mW]
120
60
40
20
5
4
3
Tc=-10℃
Tc=20℃
Tc=40℃
Tc=60℃
2
1
0
0
0
20
40
60
80
100
120
140
0
20
40
Forward Current If [mA]
80
100
120
140
Forward Current If [mA]
Threshold Current vs. Case Temperature
Peak Wavelength vs. Case Temperature
50
450
45
Peak Wavelength  p [nm]
Threshold Current Ith [mA]
60
40
35
30
25
20
15
10
448
446
444
442
440
-10
0
10
20
30
40
50
60
-10
0
10
Case Temperature Tc [ºC]
Relative Optical Output Power [a.u.]
Relative Intensity [a.u.]
40
50
60
Spectrum
  
  ⊥
-20
30
Case Temperature Tc [ºC]
Far Field Pattern
-40
20
Tc=25℃
Po=100m W
0
20
40
Angle  [°]
Tc=25℃
Po=100m W
440
442
444
446
Wavelength  [nm]


-2-
448
450
[ UTZ-SC0284_5 ]
2012/10/02

Cautions
(1) Operating method
 The LD shall change its forward voltage requirement and optical output power according to temperature change. Also, the
LD will require more operation current to maintain same output power as it degrades.
 Confirm that the optical output power generated by spike current when switching on and off does not exceed the maximum
absolute rating. Also, employ appropriate countermeasures to reduce chattering and/or overshooting in the Circuit.
(2) Static Electricity
 Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is recommended to use a wrist strap
or anti-electrostatic glove when handling the Product.
(3) Absolute Maximum Rating
 Active layer of LDs shall have high current density and generate high electric field during its operation. In order to prevent
excessive damage, the LD must be operated strictly below Absolute Max Rating.
(4) Others
 Nichia LDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment,
communications equipment, measurement instruments and household appliances). Consult Nichia’s sales staff in advance for
information on the applications in which exceptional quality and reliability are required, particularly when the failure or
malfunction of the LDs may directly jeopardize life or health (such as for airplanes, aerospace, submersible repeaters, nuclear
reactor control systems, automobiles, traffic control equipment, life support systems and safety devices).
 The Purchaser must acknowledge that any LD can be failed statically and must design its equipments fail safe design. Prior to
use of the LD, please confirm that the LD, as described in Nichia’s specifications, meets the life expectancy needs of, and
provides the features required by the Circuit and any related modules, equipment and/or systems.
 Nichia prohibit Purchaser from reverse engineering, disassembling, or taking any other steps to derive the structure or design
of the LD.
 The appearance and specifications of the product may be modified for improvement without notice. The formal specifications
must be exchanged and signed by both parties before large volume purchase begins.
 No unauthorized transmission or reproduction of this document, either in whole or in part, is permitted.
-3-
Similar pages