M5 - SERIES 1" DIAMETER SPECIFICATIONS AND ORDERING INFORMATION 2.0 AMPS @ 28 VDC The M5 Series was orginally designed to meet the requirements of MIL-S-3786/4. Standard construction includes 30° indexing up to 12 positions, solder lug terminals and adjustable stops. A very reliable switch for long life. SPECIFICATIONS ELECTRICAL MECHANICAL Current and Voltage Rating: Make and break resistive load 2.0 amps @ 28 VDC; 2.5 amp @ 120 VAC. Current Carrying Capacity: 12 amps. Dielectric Strength: 1,500 VAC between current carrying parts and ground. Contact Resistance: Average initial 5 milliohms. Insulation Resistance: In excess of 100,000 megohms Materials and Finishes: All parts utilize non-corrosive materials as standard. Terminals: Copper alloy with silver plating as standard. Insulation: Diallyl phthalate. Index: Dual-ball, hill and valley design. Index Life: 25,000 cycles minimum. Index Torque: Switches have lowest practical torque consistent with crisp detenting and smooth, reliable operation. Index Angles: Positive 30° standard, 36°, 45°, 60°, and 90° available. Index Stops: Fixed standard, adjustable, or continuous. Stop Strength: 15 in. lbs. minimum. Hardware: Mounting nut and lockwasher are shipped assembled. STANDARD PART NUMBER ADJUSTABLE STOPS SWITCHES - 30° INDEXING - STOPS SET @ 2 POS. - SOLDER LUG TERMINALS ACTIVE POLES POSITIONS 01 02 02 03 04 04 06 08 02-12 02-12 02-06 02-12 02-12 02-06 02-06 02-06 POLES/ DECK NO. OF DECKS 1 1 2 1 1 2 2 2 1 2 1 3 4 2 3 4 SHORTING M5D0112S - A M5D0212S - A M5D0206S - A M5D0312S - A M5D0412S - A M5D0406S - A M5D0606S - A M5D0806S - A NONSHORTING FIG. M5D0112N - A M5D0212N - A M5D0206N - A M5D0312N - A M5D0412N - A M5D0406N - A M5D0606N - A M5D0806N - A CE CE CJ CE CE CJ CJ CJ * * FIGURES ARE SHOWN ON PAGE 55. DIMENSIONS STANDARD CONSTRUCTION M5D - DIALLYL PHTHALATE CONSTRUCTION M • ELECTRONIC PRODUCTS UNIT OF ELECTRO SWITCH CORP. 48 2010 Yonkers Road Raleigh, NC 27604 Telephone: (888) ROTARYS or (919) 833-0707 Fax: (800) 909-9171 or (919) 833-8016 ADDITIONAL OPTIONS AND ORDERING INFORMATION M5 - SERIES How to Order Additional Options: 2 DIGIT SERIES INSULATION TYPE TOTAL POLES ACTIVE POSITIONS M5 D - DIALLYL 01 - MIN. 12 - MAX @ 30° 10 - MAX @ 36° 08 - MAX @ 45° 06 - MAX @ 60° 04 - MAX @ 90° CONTACT TYPE S - SHORTING N - NON SHORTING INDEX ANGLE STOP TYPE SHAFT/ BUSHING SHAFT FLAT 30° 36° 45° *60° *90° F - FIXED A - ADJ. SEE CHART “A” SEE CHART “B” (SPECIFY) (SPECIFY) (SPECIFY) (30° AND 36° ONLY) C - CONT. *NOT AVAILABLE IN SHORTING CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS M 5 ADDITIONAL OPTIONS D (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) SHAFT, BUSHING, AND FLAT OPTIONS CHART "A" P/N OPT. 01 02 CHART "B" SHAFT LGTH. "A" BUSH. LGTH. "B" 7/16 3/8 7/16 5/16 - STD P/N OPT. FLAT ANGLE U B 105° ROUND - STD SHAFT AS VIEWED WITH NON-TURN LUG AT 9 O'CLOCK AND SHAFT IN EXTREME CCW POSITION AND STRUT BOLTS ORIENTED VERTICALLY. U M CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS. • ELECTRONIC PRODUCTS UNIT OF ELECTRO SWITCH CORP. 2010 Yonkers Road Raleigh, NC 27604 Telephone: (888) ROTARYS or (919) 833-0707 Fax: (800) 909-9171 or (919) 833-8016 49