TDK C0603C0G1E3R3BTX Multilayer ceramic chip capacitor Datasheet

C Series
High Q Capacitors
Type:
C0603 [EIA CC0201]
Issue date:
April 2011
TDK MLCC
US Catalog
Version B11
REMINDERS
Please read before using this product
SAFETY REMINDERS
REMINDERS
1.
2.
3.
4.
5.
6.
7.
If you intend to use a product listed in this catalog for a purpose that may cause loss of life or other
damage, you must contact our company’s sales window.
We may modify products or discontinue production of a product listed in this catalog without prior
notification.
We provide “Delivery Specification” that explain precautions for the specifications and safety of each
product listed in this catalog. We strongly recommend that you exchange these delivery specifications
with customers that use one of these products.
If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according
to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export
permission in harmony with this law.
Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from
our company.
We are not responsible for problems that occur related to the intellectual property rights or other rights of
our company or a third party when you use a product listed in this catalog. We do not grant license of
these rights.
This catalog only applies to products purchased through our company or one of our company’s official
agencies. This catalog does not apply to products that are purchased through other third parties.
TDK MLCC US Catalog
Page 148
Version B11
C Series
High Q Capacitors
Type: C0603
Available Through Distribution Only*
Features
Higher Q factor than standard capacitors
High stability ith respect to ti e te perature
fre uency and voltage
cellent attenuation
High self-resonant fre uency
Lo er po er dissipation less energy absorption
Capacitance range of 0.2pF to 15pF
Available in standard and tight tolerance
Please contact TDK for Q values
Applications
High-fre uency applications
PA modules
Cellular communication, Bluetooth
Cable/satellite TV
GPS/satellite radio
Filter networks/matching networks
RF amplifiers/Low noise amplifiers
VCOs, TCXOs, etc.
DC blocking circuits
Shape &
Dimensions
LL
W
TW
BT
B
Body
BodyLength
Length
Body Width
BodyHeight
Width
Body
Terminal
Width
Body Height
Terminal Width
Dimensions in mm
Part Number
Construction
C
0603
C0G 1E 150 J T XXXX
Series Name
Dimensions L x W (mm)
Case Code
C0603
Length
0.60 ± 0.03
Internal Codes
Packaging Style
Width
0.30 ± 0.03
Packaging Code
T
Temperature Characteristic
Temperature
Characteristics
Capacitance
Change
Temperature
Range
C0G
0±30 ppm/ºC
-55 to +125ºC
Capacitance Tolerance
Rated Voltage (DC)
Voltage Code
1E
Voltage (DC)
25V
Nominal Capacitance (pF)
The capacitance is expressed in three digit codes and in units of pico
Farads (pF). The first and second digits identify the first and second
significant figures of the capacitance. The third digit identifies the
multiplier. R designates a decimal point.
Capacitance Code
0R5
010
102
105
Style
Tape & Reel
Tolerance Code
W
B
C
D
E
G
J
Tolerance
± 0.05 pF
± 0.10 pF
± 0.25 pF
± 0.50 pF
± 0.20 pF
± 2%
± 5%
Capacitance
0.5pF
1pF
1,000pF (1nF)
1,000,000pF (1μF)
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 149
Version B11
C0603 [EIA CC0201]
Capacitance
Range Chart
Capacitance Range Chart
Temperature Characteristics: C0G (0 ± 30ppm/ºC)
Rated Voltage: 25V(1E)
Capacitance
(pF)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4
4.3
4.7
5
5.1
5.6
6
6.2
6.8
7
7.5
8
8.2
9
9.1
10
11
12
13
15
16
18
20
Cap
Code
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
010
1R1
1R2
1R3
1R5
1R6
1R8
020
2R2
2R4
2R7
030
3R3
3R6
3R9
040
4R3
4R7
050
5R1
5R6
060
6R2
6R8
070
7R5
080
8R2
090
9R1
100
110
120
130
150
160
180
200
Temperature
Characteristics
Tolerance
W
(±0.05)
B
C
D
E
(±0.10pF) (±0.25pF) (±0.50pF) (±0.20pF)
G
(±2%)
J
(±5%)
-55 to 125ºC,
0±30 ppm/ºC
Standard Thickness
0.30 mm
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 150
Version B11
C0603 [EIA CC0201]
Capacitance
Range Table
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E0R2WTQ
C0G
25V
0.2
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R2BTQ
C0G
25V
0.2
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R3WTQ
C0G
25V
0.3
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R3BTQ
C0G
25V
0.3
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R4WTQ
C0G
25V
0.4
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R4BTQ
C0G
25V
0.4
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R5WTQ
C0G
25V
0.5
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R5BTQ
C0G
25V
0.5
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R6WTQ
C0G
25V
0.6
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R6BTQ
C0G
25V
0.6
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R7WTQ
C0G
25V
0.7
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R8WTQ
C0G
25V
0.7
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R7BTQ
C0G
25V
0.7
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R8BTQ
C0G
25V
0.8
± 0.10pF
0.30 ± 0.03
C0603C0G1E0R9WTQ
C0G
25V
0.9
± 0.05pF
0.30 ± 0.03
C0603C0G1E0R9BTQ
C0G
25V
0.9
± 0.10pF
0.30 ± 0.03
C0603C0G1E010BTQ
C0G
25V
1.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E010CTQ
C0G
25V
1.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R1BTQ
C0G
25V
1.1
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R1CTQ
C0G
25V
1.1
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R2BTQ
C0G
25V
1.2
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R2CTQ
C0G
25V
1.2
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R3BTQ
C0G
25V
1.3
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R3CTQ
C0G
25V
1.3
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R5BTQ
C0G
25V
1.5
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R5CTQ
C0G
25V
1.5
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R6BTQ
C0G
25V
1.6
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R6CTQ
C0G
25V
1.6
± 0.25pF
0.30 ± 0.03
C0603C0G1E1R8BTQ
C0G
25V
1.8
± 0.10pF
0.30 ± 0.03
C0603C0G1E1R8CTQ
C0G
25V
1.8
± 0.25pF
0.30 ± 0.03
C0603C0G1E020BTQ
C0G
25V
2.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E020CTQ
C0G
25V
2.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E2R2BTX
C0G
25V
2.2
± 0.10pF
0.30 ± 0.03
C0603C0G1E2R2CTX
C0G
25V
2.2
± 0.25pF
0.30 ± 0.03
C0603C0G1E2R4BTX
C0G
25V
2.4
± 0.10pF
0.30 ± 0.03
C0603C0G1E2R4CTX
C0G
25V
2.4
± 0.25pF
0.30 ± 0.03
C0603C0G1E2R7BTX
C0G
25V
2.7
± 0.10pF
0.30 ± 0.03
C0603C0G1E2R7CTX
C0G
25V
2.7
± 0.25pF
0.30 ± 0.03
C0603C0G1E030BTX
C0G
25V
3.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E030CTX
C0G
25V
3.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E3R3BTX
C0G
25V
3.3
± 0.10pF
0.30 ± 0.03
C0603C0G1E3R3CTX
C0G
25V
3.3
± 0.25pF
0.30 ± 0.03
C0603C0G1E3R6BTX
C0G
25V
3.6
± 0.10pF
0.30 ± 0.03
C0603C0G1E3R6CTX
C0G
25V
3.6
± 0.25pF
0.30 ± 0.03
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 151
Version B11
C0603 [EIA CC0201]
Capacitance
Range Table
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E3R9BTX
C0G
25V
3.9
± 0.10pF
0.30 ± 0.03
C0603C0G1E3R9CTX
C0G
25V
3.9
± 0.25pF
0.30 ± 0.03
C0603C0G1E040BTX
C0G
25V
4.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E040CTX
C0G
25V
4.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E4R3BTX
C0G
25V
4.3
± 0.10pF
0.30 ± 0.03
C0603C0G1E4R3CTX
C0G
25V
4.3
± 0.25pF
0.30 ± 0.03
C0603C0G1E4R7BTX
C0G
25V
4.7
± 0.10pF
0.30 ± 0.03
C0603C0G1E4R7CTX
C0G
25V
4.7
± 0.25pF
0.30 ± 0.03
C0603C0G1E050BTX
C0G
25V
5.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E050CTX
C0G
25V
5.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E5R1BTX
C0G
25V
5.1
± 0.10pF
0.30 ± 0.03
C0603C0G1E5R1CTX
C0G
25V
5.1
± 0.25pF
0.30 ± 0.03
C0603C0G1E5R6BTX
C0G
25V
5.6
± 0.10pF
0.30 ± 0.03
C0603C0G1E5R6CTX
C0G
25V
5.6
± 0.25pF
0.30 ± 0.03
C0603C0G1E060BTX
C0G
25V
6.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E060CTX
C0G
25V
6.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E6R2BTX
C0G
25V
6.2
± 0.10pF
0.30 ± 0.03
C0603C0G1E6R2CTX
C0G
25V
6.2
± 0.25pF
0.30 ± 0.03
C0603C0G1E6R8BTX
C0G
25V
6.8
± 0.10pF
0.30 ± 0.03
C0603C0G1E6R8CTX
C0G
25V
6.8
± 0.25pF
0.30 ± 0.03
C0603C0G1E070BTX
C0G
25V
7.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E070CTX
C0G
25V
7.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E7R5BTX
C0G
25V
7.5
± 0.10pF
0.30 ± 0.03
C0603C0G1E7R5CTX
C0G
25V
7.5
± 0.25pF
0.30 ± 0.03
C0603C0G1E080BTX
C0G
25V
8.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E080CTX
C0G
25V
8.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E8R2BTX
C0G
25V
8.2
± 0.10pF
0.30 ± 0.03
C0603C0G1E8R2CTX
C0G
25V
8.2
± 0.25pF
0.30 ± 0.03
C0603C0G1E090BTX
C0G
25V
9.0
± 0.10pF
0.30 ± 0.03
C0603C0G1E090CTX
C0G
25V
9.0
± 0.25pF
0.30 ± 0.03
C0603C0G1E9R1BTX
C0G
25V
9.1
± 0.10pF
0.30 ± 0.03
C0603C0G1E9R1CTX
C0G
25V
9.1
± 0.25pF
0.30 ± 0.03
C0603C0G1E100ETX
C0G
25V
10
± 0.20pF
0.30 ± 0.03
C0603C0G1E100DTX
C0G
25V
10
± 0.50pF
0.30 ± 0.03
C0603C0G1E110GTX
C0G
25V
11
± 2%
0.30 ± 0.03
C0603C0G1E110JTX
C0G
25V
11
± 5%
0.30 ± 0.03
C0603C0G1E120GTX
C0G
25V
12
± 2%
0.30 ± 0.03
C0603C0G1E120JTX
C0G
25V
12
± 5%
0.30 ± 0.03
C0603C0G1E130GTX
C0G
25V
13
± 2%
0.30 ± 0.03
C0603C0G1E130JTX
C0G
25V
13
± 5%
0.30 ± 0.03
C0603C0G1E150GTX
C0G
25V
15
± 2%
0.30 ± 0.03
C0603C0G1E150JTX
C0G
25V
15
± 5%
0.30 ± 0.03
C0603C0G1E160GTX
C0G
25V
16
± 2%
0.30 ± 0.03
C0603C0G1E160JTX
C0G
25V
16
± 5%
0.30 ± 0.03
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 152
Version B11
C0603 [EIA CC0201]
Capacitance
Range Table
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E180GTX
C0G
25V
18
± 2%
0.30 ± 0.03
C0603C0G1E180JTX
C0G
25V
18
± 5%
0.30 ± 0.03
C0603C0G1E200GTX
C0G
25V
20
± 2%
0.30 ± 0.03
C0603C0G1E200JTX
C0G
25V
20
± 5%
0.30 ± 0.03
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 153
Version B11
C0603 Series – High Q Capacitors
General
Specifications
No.
Item
Performance
Test or Inspection Method
1
External
Appearance
No defects which may affect
performance.
Inspect with magnifying glass (10˜).
2
Insulation
Resistance
10,000M min.
Apply rated voltage for 60s.
3
Voltage Proof
Withstand test voltage without
insulation breakdown or other damage.
Class
Apply voltage
Class 1
3 ˜ rated voltage
Above DC voltage shall be applied for 1 to 5s. Charge /
discharge current shall not exceed 50mA.
4
5
Capacitance
Q
(Class 1)
Within the specified tolerance.
Q
C
1,000 min.
30pF
Measuring
Frequency
Measuring voltage
Class 1
1MHz±10%
0.5 - 5 Vrms
See No.4 in this table for measuring condition.
Rated Capacitance
C < 30pF
Class
400 + 20˜C min.
C : Rated capacitance (pF)
6
7
Temperature
Characteristics
of Capacitance
(Class 1)
Robustness of
Terminations
T.C.
Temperature Coefficient
C0G
0 r 30 ppm/ºC
Temperature coefficient shall be calculated based on
values at 25ºC and 85ºC temperature.
Capacitance drift
Within r 0.2% or r0.05pF, whichever
larger.
Measuring temperature below 20ºC shall be -10ºC and
-25ºC.
No sign of termination coming off,
breakage of ceramic, or other abnormal
signs.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) and apply a pushing force of 2N for
10r1s.
Pushing force
P.C. board
Capacitor
8
Bending
No mechanical damage.
Reflow solder the capacitor on P.C. board (shown in
Appendix 2) and bend it for 1mm.
20
50
F
R230
1
45
45
Unit: mm
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 154
Version B11
C0603 Series – High Q Capacitors
General
Specifications
No.
Item
Performance
Test or Inspection Method
9
Solderability
New solder to cover over 75% of
termination.
Completely soak both terminations in solder at
235r5ºC for 2r0.5s.
25% may have pinholes or rough spots
but not concentrated in one spot.
Solder: H63A (JIS Z 3282)
Ceramic surface of A sections shall not
be exposed due to melting or shifting of
termination material.
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
A section
10
Resistance to solder heat
External
appearance
Capacitance
No cracks are allowed and terminations
shall be covered at least 60% with new
solder.
Characteristics
Class 1
Q (Class 1)
C0G
Change from the
value before test
Capacitance drift within
r2.5% or r0.25pF,
whichever larger.
Rated Capacitance
Q
C
1,000 min.
30pF
C < 30pF
Completely soak both terminations in solder at
260㫧5ºC for 5㫧1s.
Preheating condition
Temp.: 150㫧10ºC
Time : 1 to 2min.
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
Solder: H63A (JIS Z 3282)
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
400 + 20˜C min.
C : Rated capacitance (pF)
11
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or other
damage.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Vibration
External
appearance
Capacitance
No mechanical damage.
Characteristics
Class 1
Q (Class 1)
C0G
Change from the
value before test
Capacitance drift within
r2.5% or r0.25pF,
whichever larger.
Rated Capacitance
Q
C
1,000 min.
30pF
C < 30pF
Vibrate the capacitor with amplitude of 1.5mm P-P
sweeping the fre uencies from 10Hz to 55Hz and back
to 10Hz after 1min.
Repeat this for 2h each in 3 perpendicular directions.
400+20˜C min.
C : Rated capacitance (pF)
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 155
Version B11
C0603 Series – High Q Capacitors
General
Specifications
No.
Item
12
Temperature cycle
External
appearance
Capacitance
Performance
Reflow solder the capacitors on a P.C. board (shown in
Appendix 1) before testing.
No mechanical damage.
Expose the capacitor in the conditions in step 1
through step 4, and repeat 5 times consecutively.
Change from the
value before test
Characteristics
Class 1
Q (Class 1)
Test or Inspection Method
C0G
Capacitance drift within
r2.5% or r0.25pF,
whichever larger.
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
Step
Temperature (ºC)
Time (min.)
1
Min. operating temp. r3
30 ± 3
2–5
Rated Capacitance
Q
2
Reference Temp.
C
1,000 min.
3
Max. operating temp. r 2
30 ± 2
400 + 20˜C min.
4
Reference Temp.
2-5
30pF
C < 30pF
C : Rated capacitance (pF)
13
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or other
damage.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Moisture Resistance (Steady State)
External
appearance
Capacitance
No mechanical damage.
Class 1
Q (Class 1)
Change from the
value before test
Characteristics
C0G
Capacitance drift within
r5% or r0.5pF,
whichever larger.
Rated Capacitance
Q
C
350 min.
30pF
10pF
C < 30pF
C < 10pF
Leave at temperature 40㫧2ºC, 90 to 95%RH for 500
+24,0h.
Leave the capacitor in ambient condition for 6 to 24h
before measurement.
275 + 5/2˜C min.
200 + 10˜C min.
C : Rated capacitance (pF)
Insulation
Resistance
1,000M min.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 156
Version B11
C0603 Series – High Q Capacitors
General
Specifications
No.
Item
14
Moisture Resistance
External
appearance
Capacitance
Performance
Reflow solder the capacitors on P.C. board (shown in
Appendix 1) before testing.
No mechanical damage.
Apply the rated voltage at temperature 40r2ºC and 90
to 95%RH for 500 +24,0h.
Characteristics
Class 1
Q (Class 1)
Test or Inspection Method
C0G
Change from the
value before test
Charge/discharge current shall not exceed 50mA.
Capacitance drift within
r7.5% or r0.75pF,
whichever larger.
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
Use this measurement for initial value.
Rated Capacitance
Q
C
200 min.
30pF
C < 30pF
100 + 10/3˜C min.
C : Rated capacitance (pF)
Insulation
Resistance
15
500M
min.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Life
External
appearance
Capacitance
No mechanical damage.
Apply 2x rated voltage at 125㫧2ºC for 1,000 +48, 0h.
Class 1
Q (Class 1)
Change from the
value before test
Characteristics
C0G
Capacitance drift within
r3% or r0.3pF,
whichever larger.
Rated Capacitance
Q
C
350 min.
30pF
10pF
C < 30pF
C < 10pF
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
before measurement.
Use this measurement for initial value.
275 + 5/2˜C min.
200 + 10˜C min.
C : Rated capacitance (pF)
Insulation
Resistance
1,000M min.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 157
Version B11
C0603 Series – High Q Capacitors
General
Specifications
Appendix - 1a
Appendix - 2a
P.C. Board for reliability test
Applied for C0603, C1005, C1608, C2012, C3216
P.C. Board for bending test
Applied for C0603, C1005
100 mm
100 mm
b
Solder Resist
Copper
40 mm
1.0 mm
40 mm
a
b
c
a
Solder resist
c
b
Copper
Material : Glass Epoxy ( As per JIS C6484 GE4 )
P.C. Board thickness : Appendix - 2
0.8mm
Appendix - 1
1.6mm
Case Code
Dimensions (mm)
JIS
EIA
a
b
c
C0603
CC0201
0.3
0.8
0.3
Copper ( thickness 0.035mm )
Solder resist
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 158
Version B11
C0603 Series – High Q Capacitors
Soldering
Information
¬ Recommended Soldering Land Pattern
Chip capacitor
¬ Recommended Soldering Profile
Reflow Soldering
Solder land
Preheating
300
Solder resist
0
Reflow Soldering
Type
Symbol
Unit: mm
0.25 ~ 0.35
B
0.2 ~ 0.3
C
T
Ade uate
solder
Insufficient
solder
Preheating
Peak Temp time
3sec. (As short as possible)
Recommended soldering duration
Temp./
Dura.
0.25 ~ 0.35
Reflow Soldering
Peak temp
(°C)
Duration
(sec.)
Sn-Pb Solder
230 max.
20 max.
Lead-Free Solder
260 max.
10 max.
Solder
¬ Recommended Solder Amount
Excessive
solder
T
0
Over 60 sec.
C0603
[CC0201]
A
Temp (ºC)
A
B
Temp (ºC)
Peak
Temp
C
Manual soldering
(Solder iron)
Soldering Natural
cooling
Recommended solder compositions
Sn-37Pb (Sn-Pb solder)
Sn-3.0Ag-0.5Cu (Lead Free Solder)
Higher tensile
force on the chip
capacitor may
cause cracking.
Preheating Condition
Soldering
Maximum amount
Minimum amount
Temp. (ºC)
Reflow soldering
T
150
Manual soldering
T
150
Small solder fillet
may cause
contact failure or
failure to hold the
chip capacitor to
the P.C. board.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 159
Version B11
C0603 Series – High Q Capacitors
Packaging
Information
¬ Carrier Tape Configuration
Bulk
160mm min.
Bulk
160mm min
Chips
Leader
Drawing direction
400mm min
¬ Peel Back Force (Top Tape)
Direction & angle of pull
Top cover tape
Carrier tape
0.05 – 0.7 N
0~15q
Direction of pull force
Carrier tape shall be flexible enough to be
wound around a minimum radius of 30mm with
components in tape.
The missing of components shall be less than
0.1%
Components shall not stick to the cover tape.
The cover tape shall not protrude beyond the
edges of the carrier tape and shall not cover the
sprocket holes.
Bottom cover tape (Paper carrier tape)
¬ Chip Quantity Per Reel and Structure of Reel
Paper Carrier Tape & Reel
Top cover tape
Pitch hole
Paper carrier tape
Bottom cover tape
(Bottom cover tape is not always applied)
Case Code
JIS
EIA
C0603
CC0201
Chip
Thickness
(mm)
0.30
Taping
Material
Paper
Chip quantity (pcs.)
ijPP ´ UHHO
15,000
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 160
Version B11
C0603 Series – High Q Capacitors
Ad
dditional
Information
¬ Shape & Dimensions
¬ Environmental Information
Terminal electrode
L
B
W
G
B
T
TDK Corporation established internal product environmental
assurance standards that include the six hazardous
substances banned by the EU RoHS Directive1 enforced on
July 1, 2006 along with additional substances independently
banned by TDK and has successfully completed making
general purpose electronic components conform to the
RoHS Directive2.
1.
Abbreviation for Restriction on Hazardous
Substances, which refers to the regulation EU
Directive 2002/95/EC on hazardous substances by
the European Union (EU) effective from July 1, 2006.
The Directive bans the use of six specific hazardous
substances in electric and electronic devices and
products handled within the EU. The six substances
are lead, mercury, cadmium, hexavalent chromium,
PBB (polybrominated biphenyls), and PBDE
(polybrominated diphenyl ethers).
2.
This means that, in conformity with the EU Directive
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-based flame
retardants, PBB and PBDE, have not been used,
except for exempted applications.
Internal electrode
Ceramic dielectric
Case Code
JIS
EIA
C0603
CC0201
L
0.60
Dimensions (mm)
W
T
B
0.30
0.30
0.15
G
0.20 min.
¬ Inside Structure & Material System
3
4
1
5
For REACH (SVHC : 15 substances according to ECHA /
October 2008) : All TDK MLCC do not contain these
15 substances.
For European Directive 2000/53/CE and 2005/673/CE :
Cadmium, Hexavalent Chromium, Mercury, Lead are
not contained in all TDK MLCC.
For European Directive 2003/11/CE : Pentabromodiphenylether, Octabromodiphenyl-ether are not contained in
all TDK MLCC.
2
No.
NAME
MATERIAL
(1)
Ceramic Dielectric
CaZrO3
(2)
Internal Electrode
Nickel (Ni)
Class 1
(3)
(4)
Copper (Cu)
Termination
(5)
Nickel (Ni)
Tin (Sn)
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog
Page 161
Version B11
Similar pages