Keysight DSO90000A-01G Infiniium 90000 series oscilloscope Datasheet

Keysight Technologies
Infiniium 90000 Series Oscilloscopes
Data Sheet
02 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Table of Contents
Why Choose Keysight Oscilloscopes for Your Toughest High-Speed
Measurement Challenges?��������������������������������������������������������������������������������������������������������������03
Engineered for Unmatched Real-Time Measurement Accuracy����������������������������������������������������������������04
Keysight Infiniium Portfolio�������������������������������������������������������������������������������������������������������������������������� 19
Infiniium 90000A Series������������������������������������������������������������������������������������������������������������������������������20
InfiniiMax II: The World’s Best High-Speed Probing System Just Keeps Getting Better��������������������������22
Infiniium 90000A Series Oscilloscopes������������������������������������������������������������������������������������������������������� 24
InfiniiMax II Series����������������������������������������������������������������������������������������������������������������������������������������34
Infiniium 90000 Series Ordering Information����������������������������������������������������������������������������������������������36
Keysight Oscilloscopes��������������������������������������������������������������������������������������������������������������������������������39
Evolving Since 1939������������������������������������������������������������������������������������������������������������������������������������� 41
03 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Why Choose Keysight Oscilloscopes for Your Toughest
High-Speed Measurement Challenges?
Engineered for
unmatched real-time
measurement accuracy
As an engineer you’re no stranger to tough challenges that help you exceed your
customer’s needs and expectations. Deploying your next design successfully is even
more difficult with today’s high speed technologies. Data signal eye openings become
smaller and measurement error from your oscilloscope becomes less tolerable. Keysight
Technologies, Inc. is committed to providing the best measurement solutions for these
critical challenges.
The Keysight Infiniium 90000 Series oscilloscopes are engineered to give you unmatched
real-time measurement accuracy so you can:
1. Use your jitter budget in your design, not on your scilloscope.
2. Pass today’s demanding compliance tests more quickly.
3. Debug your toughest designs with confidence.
90000A Series Infiniium oscilloscopes
Model
91304A
91204A
90804A
90604A
90404A
90254A
Real-time
bandwidth on 4 ch
13 GHz
12 GHz
8 GHz
6 GHz
4 GHz
2.5 GHz
Maximum sampling
rate on 4 ch
40 GSa/s on 4 ch
40 GSa/s on 4 ch
40 GSa/s on 4 ch
20 GSa/s on 4 ch 1
20 GSa/s on 4 ch 1
20 GSa/s on 4 ch 1
Standard memory
Maximum memory
20 Mpts on 4 ch
20 Mpts on 4 ch
20 Mpts on 4 ch
20 Mpts on 4 ch
20 Mpts on 4 ch
20 Mpts on 4 ch
1 Gpts on 4 ch
1 Gpts on 4 ch
1 Gpts on 4 ch
1 Gpts on 4 ch
1 Gpts on 4 ch
1 Gpts on 4 ch
Noise floor at
50 mV/div
1.73 mVrms
1.45 mVrms
1.15 mVrms
0.98 mVrms
0.79 mVrms
0.64 mVrms
1. DSA model numbers come standard with 50 Mpts of memory on 4 ch.
How much time span can I capture?
Sampling rate
40 GSa/s
20 GSa/s
20 Mpts of
memory
500 μs
1 ms
50 Mpts of
memory
1.25 ms
2.5 ms
Note: time span capture = memory depth x 1/ sampling rate.
100 Mpts of
memory
2.5 ms
5.0 ms
200 Mpts of
memory
5.0 ms
10.0 ms
500 Mpts of
memory
12.5 ms
25.0 ms
1 Gpts of
memory
25.0 ms
50.0 ms
04 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy
Use your jitter budget in your design, not on your oscilloscope
Keysight’s Infiniium 90000 Series oscilloscopes offer the industry’s lowest noise floor
and most accurate real-time jitter measurements available on scopes of this bandwidth
class. Complete with full-bandwidth probing solutions and hardwareaccelerated
de-embedding and equalization techniques, Keysight oscilloscopes are the best
oscilloscope solution for today’s demanding high-speed measurements.
The industry’s lowest noise floor
Leveraging the company expertise in RF design, Keysight has invested in key technology
blocks like our proprietary Faraday caged front end to significantly reduce our
inherent scope noise floor. The result: the lowest noise floor available on any real-time
oscilloscope from 2.5 GHz to 12 GHz.
The industry’s deepest memory
With 1 Gbyte of memory, low-frequency jitter components can be more quickly resolved
in a single measurement. Statistical accuracy is improved with more data collection.
Keysight’s integrated deep memory remains responsive and allows more comprehensive
testing, supporting pattern lengths up to PRBS23 for accurate transmitter and receiver
results.
We add full bandwidth probing and accurate de-embedding and
equalization software
The performance of Keysight’s oscilloscopes is matched by the superiority of our
probing, de-embedding and equalization offerings. Maintain full bandwidth performance
to the probe tip with our InfiniiMax probing solutions.Render waveforms anywhere
in the digital serial link with our hardware accelerated N5465A InfiniiSim Waveform
Transformation Toolset. Configurable system modeling allows you to remove the
deleterious effects of unwanted channel elements, simulate waveforms with channel
models inserted, view waveforms in physically unprobeable locations, and compensate
for loading of probes and fixtures. The N5461A Serial Data Equalization software allows
you to model equalization techniques in real time.
05 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly
Offering the industry’s widest range of available compliance applications to provide
fast setup for complete, automated compliance and margin testing and reporting, the
Keysight 90000 Series scopes have become the go-to tool for test houses worldwide.
Our experts serve on the industry standards committees, and our oscilloscopes are
certified on today’s high speed serial data standards. Plus our 1G memory supports
real-time testing to pattern lengths of PRBS23 to stress your design to the max.
Choose from a wide range of complete compliance applications
Choose from the industry’s widest range of complete applications for the Infiniium 90000
Series to ensure compliance to the leading industry standards, including SATA, PCI
EXPRESS®, Ethernet, USB, and more. Comprehensive set-up wizards and full automation
of the required testing take the guesswork out of demonstrating compliance quickly. Get
further insight with our protocol and analysis decode available on PCI EXPRESS, SATA
and USB.
Put Keysight’s experts on your team
Keysight’s measurement experts sit on the industry standards committees and help
define the compliance requirements. They make sure our tools deliver exactly to the
standards. You get the benefit of years of training and experience on every measurement
you make.
Free up valuable engineering resources
Set-up wizards combined with intelligent test filtering make it simple to ensure the right
tests are being run. Comprehensive HTML reports with visual documentation and pass/
fail results guarantee that critical information is retained on each test. Technicians can
run complete and accurate testing on their own, freeing valuable engineering resources.
PrecisionProbe
Keysight’s N2809A-1NL PrecisionProbe software quickly characterizes and compensates
the frequency response of any path to the 90000 Series input. PrecisionProbe’s patented
technology uses the < 15ps edge from the 90000 Series oscilloscope to:
–– Measure input impedance and response of any probe and the loss of any
cableQuickly correct from probe and cable loss(without extra instruments such as
VNA or TDR)
–– Quickly correct from probe and cable loss(without extra instruments such as VNA or
TDR)
–– Correct probing issues such as phase nonlinearity, magnitude non-flatness, and see
the effect of probe loading
–– Quickly gain insight into impedance/capacitance that defines your connection
PrecisionProbe uses Keysight’s proprietar
200 GHz indium phosphide process to
create a fast edge for characterization with
PrecisionProbe.
06 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence
The 90000 series boasts an ever-expanding set of measurement applications for serial
debugging and protocol viewing, jitter testing, advanced triggering, measurement
customization, and rapid automation. Put the power of the scope to work for your unique
debug and analysis challenges.
Streamline your debug and analysis tasks with the industry’s widest
range of application software
Whether you need to trigger and decode serial buses, iron out the kinks in your memory
designs, or see FFT based spectrum analysis of your signal, the Infiniium 90000 Series
has application software to help. Our serial protocol views are unique to oscilloscopes,
and our DDR debug tools support multiple generations of the standard. Quickly access
additional features from the scope’s standard menus.
Customize your scope for even more efficiency
The N5414B-1NL InfiniiScan Event Identification software makes unique capabilities
like Zone Qualify and Generic Serial triggering possible. Rapidly automate any scope
measurement using the N5467B-1NL User Defined Application and have it appear
seamlessly in your scope’s menu. Customize your Infiniium further by taking full
advantage of MyInfiniium (standard on all 90000A Series oscilloscopes). Use MyInfiniium
to deliver automated measurements, execute customized scripts, save screenshots, or
load your favorite setup.
Add measurement capability with MATLAB compatibility
If we haven’t provided exactly what you need, take customization to a new level with
MATLAB (Option 062) - a data analysis software environment and scripting language
with over 1,000,000 users today. Use MATLAB to design and apply your own filters to
oscilloscope signals, graphically visualize oscilloscope signals in 2-D and 3-D plots,
automate measurements, and build test applications. Add the N5430A-1NL User Defined
Function software to your scope to seamlessly integrate your custom functionality into
the Infiniium 90000 menus so results are displayed on the scope screen. Keysight is the
only T&M manufacturer today that sells and supports MATLAB as its own product as part
of a complete T&M solution.
07 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
I2C/SPI serial trigger and decode (N5391A-1NL or Option 007 on
new scope purchases)
Given even further insights with protocol decode capability. Quickly move between
physical and protocol layer information using the time-correlated tracking marker.
Display protocol content using waveform symbols and the industry’s first multi-tab
protocol viewer. The packets tab shows a high level view of the packet over time.
Trigger and view on-screen serial decode of
I2C packets
Frequency domain analysis
Infiniium’s built-in FFT allows users to quickly and easily analyze the frequency
components of their signals. Both FFT magnitude and phase can be displayed and
can be combined with other built-in math functions or Matlab based measurements.
A resolution bandwidth of 6 kHz is supported with the standard 10 Megabytes of
acquisition memory at the maximum sample rate of 40 GSa/s. With optional acquisition
memory installed resolution bandwidths of 2 kHz can be obtained. Standard windowing
of Hanning, Flattop and Rectangular are supported along with cursor based power
measurements. When more powerful frequency domain measurements are required
including modulation analysis, consider the Keysight 89601A Vector Signal Analyzer
software.
Hardware accelerated differential and common mode math
Select the channel menu and enable differential mode to enable hardware accelerated
math capability. Enjoy full channel functionality including InfiniiScan triggering and jitter
analysis. Save time, by using the hardware acceleration for even faster update rates with
your differential and common mode math needs.
08 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
EZJIT analysis software (E2681A-1NL or option 002 on new scope
purchases)
Quickly characterize and evaluate most commonly needed jitter measurements,
including cycle-cycle, N-cycle, period, time-interval, error, setup and hold time,
histograms, measurement trending and jitter spectrum.
Includes advanced clock recovery options such as constant frequency and PLL. Make
measurements on repetitive or arbitrary data.
This application is supported on all models and is standard on DSA models.
Conduct jitter analysis.
For more information: www.keysight.com/find/EZJIT
EZJIT Plus analysis software (N5400A-1NL or Option 004 on new
scope purchases. To upgrade from EZJIT to EZJIT Plus, order
N5401A.)
EZJIT Plus adds additional compliance views and an expanded measurement setup
wizard to simplify and automate RJ/DJ separation for testing against industry standards.
This application is supported on all models and is standard on DSA models.
For more information: www.keysight.com/find/EZJITPlus
Analyze jitter plus RJ/DJ separation.
EZJIT Complete analysis software (N8813A-1NL or Option 070 on
new scope purchases)
EZJIT Complete includes all of the advanced jitter analysis capabilities of EZJIT and
EZJIT Plus, and adds advanced analysis of the vertical noise affecting the ones and
zeros of your real-time eye. Decomposition of vertical noise provides key insight into
degradation of your eye height. In providing advanced decomposition of both
horizontal jitter and vertical noise components of your signals, EZJIT Complete
represents the most comprehensive analysis software available.
This application is supported on all models and is a standard on DSA models.
For more information: www.keysight.com/find/EZJITComplete
EZJIT Complete.
09 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
InfiniiScan event identification (N5414B-1NL or Option 009 on new
scope purchases)
Rapidly trigger on complex events and identify signal integrity issues. This innovative
software quickly scans through thousands of acquired waveform cycles and isolates
anomalous signal behavior.
This application is supported on all models.
For more information: www.keysight.com/find/infiniiScan
Identify signal integrity issues with
InfiniiScan Zone – Qualify triggering.
PrecisionProbe software (N2809A-1NL or Option 001 on new scope
purchases)
Make more accurate measurements independent of what probes or cables used.
Keysight’s N2809A PrecisionProbe software characterizes and corrects for the loss in
your specific cable or probe. PrecisionProbe removes the uncertainty about the input
connected to your oscilloscope by allowing you to see its characteristics in less than
five minute. PrecisionProbe gives you design and debug confidence by allowing you to
quickly de-embed probe and cable loss to make more accurate measurements.
For more information: www.keysight.com/find/PrecisionProbe
Quickly characterize and correct for any
input to your oscilloscope.
High-speed serial data analysis software (E2688A-1NL or Option
003 on new scope purchases)
Quickly validate signal integrity for high-speed serial interfaces with embedded clocks.
Recover embedded clocks synchronized with the analog waveform view. Build and
validate eye diagrams.
The SDA package also includes software-based bit-level triggering and decode for
8B/10B. This application is supported on all models and comes standard on DSA models.
For more information: www.keysight.com/find/SDA
Recover embedded clocks with serial data
analysis (SDA).
10 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
Infiniium remote programming interface (Now standard on all
Infiniium scopes)
Operate your Infiniium compliance and validation applications remotely using .NET
languages.
This application is supported on all models.
For more information: www.keysight.com/find/RPI
Control your applications remotely.
Serial data equalization (N5461A-1NL or Option 012 on new scope
purchases)
Measure at the pin and use equalization to see a virtual eye on the other side of an
equalizer. Model equalization techniques such as DFE, FFE, and CTLE.
This application is supported on all models.
For more information: www.keysight.com/find/SDE
Reduce receiver errors by opening tightly
shut eyes.
InfiniiSim waveform transformation and de-embedding toolset
(Basic: N5465A-3NL or Option 13 on new scope purchases.
Advanced: N5465A-1NL or Option 14 on new scope purchases.)
The N5465A InfiniiSim waveform transformation toolset for Infiniium Series
oscilloscopes provides the most flexible and accurate means to render waveforms
anywhere in the digital serial link. The configurable system modeling allows you to
remove the deleterious effects of unwanted channel elements, simulate waveforms
with channels models inserted, view waveforms in physically un-probable locations,
compensate for loading of probes and other circuit elements, and do so simply and
quickly on the real-time oscilloscope.
This application is supported on all models.
For more information: www.keysight.com/find/InfiniiSim
Model channel effects including reflection.
11 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
MATLAB data analysis software (Option 061 or O62 on new scope
purchases)
MATLAB is a data analysis software environment and scripting language used by over
1,000,000 users in aerospace/defense, automotive, communications, electronics, and
other applications. MATLAB is now available directly from Keysight as in instrument
option with the purchase of your Keysight 90000 Series oscilloscope. Install MATLAB
on your oscilloscope or remote PC to make customized measurements, design and
apply your own filters to oscilloscope signals, graphically visualize signals in 2-D or 3-D
plots, automate measurements, or build test applications. Purchase MATLAB with your
Keysight 90000 Series oscilloscope to ensure version compatibility and so that your
MATLAB software license is always available when you need it.
Control your applications remotely.
For more information: www.keysight.com/find/matlab_oscilloscopes
User-definable application (N5467B-1NL or Option 040 on new
scope purchases)
Rapidly develop your own automated measurements and tests. This application
provides the framework you need to quickly program and automate any single or set of
measurements the oscilloscope can make. The application also provides full control of
other Keysight instruments and HTML reporting capabilities.
For more information: www.keysight.com/find/UDA
Quickly automate oscilloscope
measurements.
User-defined function (N5430A-1NL or Option 010 on new scope
purchases)
If we haven’t provided exactly what you need, use the N5430A User Defined Function
software to create it yourself. Develop your own math functions or filters using MATLAB.
Your custom functionality is seamlessly integrated into the Infiniium 90000 menus and
results are displayed on the scope screen. This requires MATLAB (available as Option
062) to be installed directly on the oscilloscope. Keysight is the only T&M manufacturer
today that sells and supports MATLAB as its own product.
This application is supported on all models and requires MATLAB software (not included
with UDF).
For more information: www.keysight.com/find/UDF
Signal equalization using user-defined
function.
12 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
Vector signal analysis software (89601A)
Expand the measurement capability of your scope with the 89601A vector signal analysis
software. This advanced DSP-based software takes the digitized signal data from the
scope and displays FFT-based spectrum analysis and wide-bandwidth digital modulation
analysis for wireless communication signals such as W-CDMA and cdma2000 ® and
wireless networking signals such as 802.11 WiFi and 802.16 WiMAX®.
Take advantage of the super-wide bandwidth of your scope to capture and evaluate
radar signals.
For more information: www.keysight.com/find/VSA
Use vector signal analysis software to see
FFT-based spectrum analysis.
I2C/SPI serial trigger and decode (N5391A-1NL or Option 007 on
new scope purchases)
This application displays real-time time-aligned decode of I2C and SPI packets. View
decode in waveform area or in protocol lister.
This application works on all models.
For more information: www.keysight.com/find/90000_I2C-SPI
Trigger and view on-screen serial decode of
I2C packets.
JTAG (IEEE 1149.1) triggering and decode (N8817A-1NL or Option
042 on new scope purchases)
This application displays real-time time-aligned decode of JTAG (IEEE 1149.1) TDI and
TDO signals. The application eliminates the difficult task of manually determining JTAG
TAP controller states, instruction and data register decode, and flags error conditions.
The application includes scan chain description features including the ability to import
.bsdl files for each device and displays device names and opcodes in the protocol listing.
This application works on all models and can use any combination of scope or logic
acquisition channels.
For more information: www.keysight.com/find/90000_JTAG
Trigger on and decode JTAG packets.
13 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Debug your toughest designs with confidence (Continued)
RS-232/UART serial decode and trigger (N5462A-1NL or Option 015
on new scope purchases)
This application eliminates the need to manually decode bus traffic. Using data captured
on the scope channels, the application lets you easily view the information sent over an
RS-232.
Display real-time time-aligned decode of transmit and receive lines.
This application works on all models.
For more information: www.keysight.com/find/90000_RS-232
Trigger on and decode RS-232/UART
transmission.
N8805A-1NL USB 3.0 protocol triggering and decode
Trigger on and view USB 3.0 with the industry’s first oscilloscope-based protocol
analyzer with time-correlated views of physical layer and transaction layer errors. The
multi-tab protocol viewer includes correlation between the waveforms and the selected
packet, enabling you to quickly move between the physical and protocol layer using the
time-correlated tracking marker.
For more information: www.keysight.com/find/usb3decode
Isolate signal integrity problems from
logic-level coding errors on bidirectional
serial data streams.
14 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly
USB serial trigger and protocol viewer (N5464A-1NL or Option 016
on new scope purchases)
Trigger on and quickly view USB 2.0 packets, payload, header and detail information.
Powerful time-correlated views of waveform and symbol, to the bit level, make it easy to
isolate communication faults.
This application is supported on all models.
For more information: www.keysight.com/find/90000_USB_protocol_viewer
Trigger on and decode USB packets.
PCI EXPRESS serial trigger and protocol viewer (N5463A-1NL or
Option 017 on new scope purchases)
This application provides protocol-level triggering and viewing of a PCIe ® lane. Quickly
view packets, payload, header, and detail information. Powerful time-correlated views of
waveform, symbol, character, link and transaction layer packet data down to the bit level
make it easy to isolate communication faults to logic or analog sources.
This application is supported on all 4 GHz and greater models.
For more information: www.keysight.com/find/90000_PCI_protocol_viewer
Trigger on and decode PCIe serial packets.
SATA triggering and decode (N8801A-1NL or Option 018 on new
scope purchases)
Trigger on and view both protocol layer information and physical layer signal
characteristics for SATA 1.5 Gb/s, 3.0 Gb/s, and 6.0 Gb/s. Numerical decode values are
automatically displayed and synchronizes below the capture signal or seen in protocol
viewer.
This application works on all models.
For more information: www.keysight.com/find/N8801A
Trigger on and decode SAS/SATA serial
packets.
15 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly (Continued)
MIPI® D-PHYSM trigger and decode (N8802A-1NL or Option 019 on
new scope purchases)
This application eliminates the need to manually decode bus traffic. Using data
captured on the scope, the application lets you easily view the information sent over MIPI
serial buses.
The application also enables software based protocol triggering.
This application is supported on all models ≥ 4 GHz bandwidth.
For more information: www.keysight.com/find/N8802Ar
Trigger on and decode MIPI packets.
Ethernet compliance testing (N5392B-3NL or Option 021 on new
scope purchases)
Perform a wide range of electrical tests for 10-, 100-, and 1000-Base-T systems. An
N5395B or N5395C test fixture and N5396A jitter test cable speed compliance testing.
This application is supported on all models.
For more information: www.keysight.com/find/N5392B
Validate Ethernet compliance.
PCI EXPRESS electrical performance validation and compliance
Software (N5393F or Option 022 on new scope purchases)
Provides fast and easy way to verify and debug your PCI EXPRESS designs. Allows you
to automatically execute PCI EXPRESS electrical checklist tests, and displays the results
in a flexible report format. Ensures that your Gen2 measurements will have absolute
consistency with measurements made using the PCI-SIG’s standalone Sigtest software.
For more information: www.keysight.com/find/N5393D
Quickly verify and debug your PCI EXPRESS
designs.
HDMI electrical performance validation and compliance software
Quickly verify and debug your High Definition Multi-media Interface (HDMI) designs.
The N1080A fixture provides access to the compliance points for the electrical
measurements required for the transmitter compliance testing.
Switch matrix support is available by ordering N5399C-7NL (Option 702 on new scope
purchases). This application is support on all models ≥ 8 GHz bandwidth.
For more information: www.keysight.com/find/N5399C
Verify and debug your HDMI designs.
16 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly (Continued)
Energy efficient ethernet application (N5392B-1NL or Option 060 on
new scope purchases)
Industry leading compliance application that measures 10/100/1000BTe Energy Efficient
Ethernet IEEE 802.3az-2010 specification. Exclusive EEE fixture allows you to measure
all test modes at all speeds. Detailed reporting with clear measurements and pass/fail
results.
This application is supported on all models.
For more information: www.keysight.com/find/EEE
Characterize and evaluate the signal
integrity of your Energy Efficient Ethernet
devices.
SATA 6G compliance test software (N5411B-1NL or Option 038 on
new scope purchases)
Rapidly validate and debug your SATA 1.5Gb/s (Gen 1), 3.0 Gb/s (Gen2) and 6.0 Gb/s
(Gen3) silicon, host bus adapter, port multiplier, high-density disk drive, solid-state
disk drive or optical disk drive. Provides automated compliance test support for the i
(internal), m(eSATA) and x(SAS attachment) interfaces points, and displays the results in
a flexible report format.
This application is supported on all models ≥ 12 GHz bandwidth.
For more information: www.keysight.com/find/N5411B
Simplify the validation of SATA designs.
DisplayPort 1.2 compliance test software (U7232C-1NL or Option
045 on new scope purchases)
Sets the benchmark for ease-of-use, and offers complete testing without compromise.
The software guides the user sequentially through the tasks ensuring minimal setup
error, executes the tests specified by the standard and conveys the test information
through a convenient software generated report. The three modes of physical layer
test allow for automated measurements based on the customizable configuration
of compliance and characterization testing. To make the test signal connection, the
Keysight W2641B DisplayPort test point access adaptor completes the DisplayPort
source solution.
DisplayPort 1.2 also comes with switch matrix support to make multi-lane testing
significantly easier by ordering U7232C-7NL (Option 701 on new scope purchases). The
application is supported on all models ≥ 8 GHz.
For more information: www.keysight.com/find/U7232C
Full suite of DisplayPort source tests.
17 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly (Continued)
USB 2.0 compliance test software (N5416A-1NL or Option 029 on
new scope purchases)
Quickly determine USB compliance with this USB-IF recognized solution. A setup wizard
guides you through test selection and configuration.
This application is supported on all models.
For more information: www.keysight.com/find/N5416A
Check for USB compliance.
XAUI electrical validation with 10GBASE-CX4, CPRI, OBSAI, and
Serial RapidIO support (N5431A-1NL or Option 030 on new scope
purchases)
Improve your efficiency by confirming that your devices conform to the XAUI
specifications as defined by the IEEE 802.3-2005 10-gigabit Ethernet specification.
Provides support for the XAUI-derived 10GBASE-CX4 specification.
The application is supported on all models.
For more information: www.keysight.com/find/N5431A
Perform automated testing and margin
analysis for XAUI and XAUI-derived
specifications.
MIPI D-PHY compliance test software (U7238C-1NL or Option 035
on new scope purchases)
Automatically execute D-PHY electrical checklist tests for CSI and DSI architectures.
Displays the results in a flexible report format.
MIPI D-PHY also supports the ability to test compliance with switches, making your
testing faster, by ordering U7238C-7NL (Option 703 on new scope purchases). The
application is supported on all models.
For more information: www.keysight.com/find/d-phy_compliance
Automatically execute D-PHY electrical
checklist tests for CSI and DSI
architectures.
18 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Engineered for Unmatched Real-Time Measurement Accuracy (Continued)
Pass today’s demanding compliance tests more quickly (Continued)
10GBASE-T ethernet electrical conformance application for Infiniium
oscilloscopes (U7236A-1NL or Option 036 on new scope purchases)
Takes care of the tedious task of instrument control and configures the oscilloscope,
spectrum analyzer, or vector network analyzer as needed by each 10GBASE-T test to
provide rapid, accurate, and repeatable test execution.
The application is supported on all models.
For more information: www.keysight.com/find/10gbase-t
Automatically execute 10GBASE-T Ethernet
physical-layer (PHY) electrical tests.
USB 3.0/3.1 compliance test software (U7243B-3NL or Option 041
on new scope purchases
Provides industry leading automated test support for USB 3.0 products and displays
the test results in a comprehensive test report. For best measurement accuracy use the
Keysight U7243B USB 3.0 transmitter and receiver test fixtures. Keysight’s USB 3.0 test
solution is designed from the ground up with the needs of the test engineer in mind.
The application is supported on models ≥ 12 GHz.
For more information: www.keysight.com/find/USB3
Validate and debug your USB 3.0 silicon,
host, hub or device.
DDR1 and LPDDR/DDR2, LPDDR2/DDR3, DDR4 and GDDR5
compliance testing (Options 031/032/033/058 on new scope
purchases)
Quickly and easily evaluate and characterize your memory designs. Automated
testingbased on JEDEC specifications saves time. The application also includes
additional debug and compliance capabilities.
This application is supported on all models. However, the DDR technology you are using
may dictate the minimal bandwidth required for your scope.
Test DDR memory.
For more information: www.keysight.com/find/DDR
SD UHS-I and SD UHS-II card compliance testing
(U7246A-1NL/N6461A-1NL)
The SD card compliance test software gives you a fast, easy way to test, debug and
characterize your SD designs up to 1.5 Gb/s in accordance with the SD Specification.
The U7246A with 9000A and 90000A Series oscilloscopes is a certified test tool for SD
Card Phy electric tests with the SD Association. Reference is available in SDA official
document: SD Test Tool Information Ver1.0 Sep. 13, 2010.
For more information: www.keysight.com/find/U7246A
www.keysight.com/find/N6461A
Comprehensive analysis that automates the
complex measurements even when you are
not there.
19 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Keysight Infiniium Portfolio
Keysight’s Infiniium oscilloscope lineup includes bandwidths from 500 MHz to 63 GHz. Use the following selection guide to determine
which best matches your specific needs. Infiniium real-time oscilloscopes feature the following:
–– World’s highest bandwidth on 4 channels in a single frame
–– Industry’s lowest noise floor
–– Full PrecisionProbe compatibility
Available bandwidths
Up to 4 GHz
6 to 16 GHz
S-Series
500 MHz, 1 GHz,
2.5 GHz, 4 GHz
6 GHz (2 ch), 8 GHz
(2 ch)
90000A Series
2.5 GHz, 4 GHz
90000 X-Series
6 GHz, 8 GHz,
12 GHz, 13 GHz
13 GHz, 16 GHz
20 to 63 GHz
20 GHz, 25 GHz, 33
GHz
Z-Series
20 GHz, 25 GHz,
33 GHz, 50 GHz,
63 GHz
63 GHz
160/80 GSa/s
Max upgradable bandwidth
Sample rate (2-channel/4-channel)
8 GHz
10/20 GSa/s
13 GHz
40/40 GSa/s
33 GHz
80/40 GSa/s
Channel inputs and connector types
50 Ω and 1 MΩ,
BNCs
50 Ω, BNCs
Memory depth (standard/max)
MSO models
Supported InfiniiMax probe families
50 M/1 Gpts
Yes
InfiniiMax 2
20 M/2 Gpts
No
InfiniiMax 2
50 Ω, 2.92 and 3.5 mm 50 Ω, 1.85 mm,
SMAs
2.4 mm, 2.92 and
3.5 mm, SMAs
20 M/2 Gpts
50 M/2 Gpts
No
No
InfiniiMax 3 InfiniiMax InfiniiMax 3
2 with adapter
InfiniiMax 2 with
adapter
20 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series
Starting with an 18-GHz, BNC-compatible connector, an ultra‑low noise floor front end
design using Faraday cage technology ensures high signal integrity in its signal path.
Click on the icon at the bottom left of the
Infiniium screen to minimize the status
and scales tab for full screen viewing.
Maximize your viewing needs.
Ever wanted to change the scale or offset
of a function or waveform memory? If you
have, you know that it requires multiple
menus and key strokes. In Infiniium
software version 2.01 and later, you
can now map functions and waveform
memories to the front panel controls of the
oscilloscope!
21 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
AutoProbe interface completely configures your scope for use with the InfiniiMax probing
system and previous-generation Keysight active probes.
Simply press the horizontal delay knob
to set the delay value to zero. A zoom
button provides quick access to two
screen zoom mode.
Dedicated single acquisition button
provide better control to capture an
unique event.
Customizable Multipurpose key gives
you any five automated measurements
with a push of a button. You can
also configure this key to execute a
script, print/save screen shots, save
waveforms, or load a favorite setup.
Measure section including a toggling
marker button and a dedicated marker
knob provides quick access to your
marker control.
Quick access to fine/vernier control
by pressing the horizontal and vertical
sensitivity knobs.
Increase your productivity with
a familiar Infiniium graphical
user interface, like your favorite
drag‑and‑drop measurement icons.
Infiniium’s analog-like front panel has
a full set of controls color coded to the
waveforms and measurements, making
your tasks simple.
Optional USB external DVD-RW drive
allows you to install your favorite
third‑party software conveniently and
can be used to back up your critical
measurement data.
Install third-party software packages
on Windows XP Pro operating system
such as Excel, LabVIEW, Keysight
VEE, MATLAB, anti-virus software,
and more, to perform customized
processing and automation of your
oscilloscope or to make the scope
compliant to the network environment
of your company.
22 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
InfiniiMax II: The World’s Best High-Speed Probing System Just Keeps Getting Better
InfiniiMax offers you the highest
performance
available for measuring differential
and single‑ended signals, with flexible
connectivity solutions for today’s highdensity ICs and circuit boards.
InfiniiMax probes have fully
characterized performance
for all of their various probe heads. This
includes:
–– Swept frequency response plot
–– Common mode rejection versus
frequency plot
–– Impedance versus frequency plot
–– Time-domain probe loading plot
–– Time-domain probe tracking plot
Controlled impedance
transmission lines in every probe
head deliver full performance
versus the performance limitations
introduced by traditional wire accessories.
Probe interface software
allows you to save the calibration
information for up to 10 different probe
heads per channel and will automatically
retrieve calibration data for a probe
amplifier when attached to the scope.
A flat frequency response
over the entire probe bandwidth eliminates
the distortion and frequency‑dependent
loading effects that are present in probes
that have an in-band resonance.
E2695A 8-GHz differential SMA
probe head
allows you to connect two SMA cables
to make a differential measurement on a
single scope channel.
E2679A 6‑GHz extremely small
single-ended, solder‑in probe
heads
for probing even the hardest‑to‑reach
single-ended signals.
N5425A 13‑GHz high‑bandwidth
solder‑in differential ZIF probe
head
and N5426A ZIF tip provides maximum
bandwidth with the industry’s first
lead-free solder-in probe solution in an
economical replaceable tip form factor.
N5451A 9‑GHz/5‑GHz
long-wire ZIF tip
High-input impedance active
probes
provides a high‑bandwidth economical
replaceable solder-in tip with extra reach
(9 GHz with 7 mm and 5 GHz with 11 mm
wire).
minimize loading, support differential
measurements and DC offset, and can
compensate for cable loss.
N5451A 9‑GHz/5‑GHz
long-wire ZIF tip
Probe calibration software
delivers the most accurate probe
measurements and linear phase response
and allows various probe combinations to
be deskewed to the same reference time.
provides a high‑bandwidth economical
replaceable solder-in tip with extra reach
(9 GHz with 7 mm and 5 GHz with 11 mm
wire).
E2695A 8-GHz differential SMA
probe head
allows you to connect two SMA cables
to make a differential measurement on a
single scope channel.
N5426A
N5451A
23 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Six different InfiniiMax probe amplifiers from 1.5 GHz to 13 GHz are available for
matching your probing solution to your performance and budget requirements. The
1168/69A InfiniiMax II amplifiers offer the highest bandwidth and the lowest noise floors.
The 1134/32/31/30A offer a more cost efficient solution and wider dynamic range.
N5382A 13‑GHz high‑bandwidth
differential browser
N2884A Differential Fine-wire
Probing Tip
provides maximum bandwidth for handheld or probe holder use. Variable spacing
from 0.2 to 3.3 mm (8 to 130 mills).
InfiniiMax differential fine-wire probing tip
is a high fidelity, high bandwidth solution
for probing an active IC.
E2675A 6‑GHz differential
browser
is the best choice for general-purpose
trouble shooting of differential or singleended signals with z-axis compliance and
variable spacing from 0.25 to 5.80 mm
(10 to 230 mills).
E2676A 6‑GHz single-ended
browser
is the best choice for general-purpose
probing of single-ended signals when the
small size of the probe head is the primary
consideration.
E2678A 12‑GHz differential
socket probe head
N2887A InfiniiMax soft touch pro
probe adapter
adapts from the Keysight pro series (36 ch)
soft touch connectorless logic analyzer foot
print to the Keysight InfiniiMax I & II series
probe amplifier input connectors.
can be used to measure either differential
or single‑ended signals via a plug-on
socket connection.
N2880A In-line attenuator kit
N5380B 13‑GHz high‑bandwidth
differential SMA
allows you to increase the dynamic range
and the offset range of the InfiniiMax
probe without affecting the bandwidth.
probe head provides maximum bandwidth
for SMA‑fixtured differential pairs.
N5450B InfiniiMax extreme
temperature extension cable
provides extra reach into environmental
chambers.
N2881A DC blocking capacitors
can be used to in series with the N2880A
InfiniiMax in-line attenuators to block out
unwanted DC components of the input
signal up to 30V.
N2888A InfiniiMax Soft touch
half-channel probe adapter
adapts from the Keysight half-channel
(18 ch) Soft touch connectorless logic
analyzer foot print to the Keysight
InfiniiMax I & II series probe amplifier input
connectors.
24 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes
Performance characteristics
Vertical
Input channels
Analog bandwidth (–3 dB) 1, 5
DSP enhanced bandwidth 4
Rise time/fall time 6
10 to 90%
20 to 80%
Input impedance 7
Sensitivity 2
Input coupling
Vertical resolution 3
Channel to channel isolation (any two
channels with equal V/div settings
DC gain accuracy 1, 2
Maximum input voltage 1
Offset range
Offset accuracy 1, 2
Dynamic range
DC voltage measurement accuracy 1, 2
RMS noise floor (scope only)
Volts/div
5 mV
10 mV
20 mV
50 mV
100 mV
200 mV
500 mV
1V
1.
Four
90254A
90404A
90604A
90804A
2.5 GHz
4 GHz
6 GHz
8 GHz
91304A: 13-GHz real-time, user-selectable DSP enhanced bandwidth
90254A
90404A
90604A
90804A
140 ps
105 ps
70 ps
54 ps
105 ps
79 ps
53 ps
38 ps
50 Ω, ± 3%
1 mV/div to 1 V/div
DC
8 bits, ≥ 12 bits with averaging
DC to 3 GHz: 90804A/91204A/91304A: 60 dB (≥ 1000:1)
90254A/90404A/90604A: 50 dB (≥ 316:1)
3 to 8 GHz: 40 dB (≥ 100:1)
8 GHz to BW: 35 dB (≥ 56:1)
± 2% of full scale at full resolution channel scale (± 2.5% for 5mV/div)
±5V
Vertical sensitivity
Available offset
0 mV/div to ≥ 40 mV/div
± 0.4 V
> 40 mV/div to ≥ 75 mV/div
± 0.9 V
> 75 mV/div to ≥ 130 mV/div
± 1.6 V
> 130 mV/div to ≥ 240 mV/div
± 3.0 V
> 240 mV/div
± 4.0 V
≤ 3.5 V: ± (2% of channel offset + 1% of full scale) + 1 mV
> 3.5 V: ± (2% of channel offset + 1% of full scale)
± 4 div from center screen
Dual cursor: ± [(DC gain accuracy) + (resolution)]
Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]
90254A
153 μV
183 μV
275 μV
645 μV
1.27 mV
2.47 mV
6.48 mV
12.5 mV
90404A
199 μV
232 μV
342 μV
799 μV
1.56 mV
3.03 mV
8.00 mV
15.6 mV
90604A
259 μV
295 μV
424 μV
985 μV
1.92 mV
3.71 mV
9.91 mV
19.2 mV
90804A
322 μV
358 μV
498 μV
1.15 mV
2.22 mV
4.28 mV
11.5 mV
22.3 mV
91204A
12 GHz
91304A
12 GHz
91204A
35 ps
25 ps
91304A
32 ps
23 ps
91204A
435 μV
483 μV
650 μV
1.45 mV
2.80 mV
5.41 mV
14.7 mV
28.5 mV
91304A
467 μV
536 μV
758 μV
1.73 mV
3.37 mV
6.58 mV
17.4 mV
34.1 mV
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
7a. Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
7b. Measurement threshold = fixed voltage at 50% level.
7c. Time ranges ≤ 10 μs.
8. Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
9. Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
10. Requires Option 010 user defined function.
11. 11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
12. Typically triggers as low as 5 mV/div sensitivity.
25 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Vertical (Continued)
RMS noise floor (scope with probe)
Volts/div
20 mV
50 mV
100 mV
200 mV
500 mV
1V
Horizontal
Main timebase range
Main timebase delay range
Zoom timebase range
Time scale accuracy 1, 8
Oscilloscope channel de-skew range
Intrinsic jitter 6 (sample clock jitter)
Inter-channel intrinsic jitter 3
Inter-channel skew drift 3, 7
Jitter measurement floor 2
Time interval error
Period jitter
Cycle-cycle/N-cycle jitter
Inter-channel jitter measurement floor 2, 3, 5
90254A with
1131A
3.2 mV
3.3 mV
3.4 mV
4.0 mV
7.1 mV
13 mV
90404A with
1132A
3.5 mV
3.6 mV
3.8 mV
4.6 mV
8.6 mV
16 mV
90604A with
1134A
4.0 mV
4.0 mV
4.3 mV
5.3 mV
10 mV
19 mV
90804A with
1168A
2.2 mV
2.3 mV
2.9 mV
4.7 mV
12 mV
23 mV
5 ps/div to 200 s/div real-time
–200 s to 200 s real-time
1 ps/div to current main time scale setting
± (0.4 ppm initial + 0.5 ppm/year aging)
± 25 µs range, 100 fs resolution
Acquired time range or delta-time
Internal reference
delta-time Interval
< 100 µs (10 µs/div)
0.5 ps rms
1 ms (100 µs/div)
1.0 ps rms
10 ms (1 ms/div)
1.2 ps rms
100 ms (10 ms/div)
5.0 ps rms
550 fs rms
< 500 fs rms
91204A with
1169A
2.5 mV
2.8 mV
3.5 mV
5.9 mV
15 mV
28 mV
91304A with
1169A
2.7 mV
3.1 mV
4.2 mV
7.5 mV
19 mV
37 mV
External reference
0.5 ps rms
1.0 ps rms
1.2 ps rms
1.2 ps rms
2
2
 NoiseFloor 

 + ( Intrinsic Jitter)
 SlewRate 
2
2
 NoiseFloor 
2i 
 + ( Intrinsic Jitter )
 SlewRate 
2
2
 NoiseFloor 
3i 
 + ( Intrinsic Jitter )
 SlewRate 
2
2
 TimeInterval  Time Interval   Interchannel
 Error Edge1  +  Error Edge 2  + 
(
) 
(
)   IntrinsicJitter

2
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
3. Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, time interval error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed delta time measurement accuracy measurement value. Do not double the listed time scale accuracy value in delta time
measurement accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
6. External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7. Skew between channels caused by ± 5 ºC temperature change.
8. Initial = immediately after factory or user calibration.
26 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Horizontal (Continued)
Delta time measurement accuracy 2, 3, 4, 5
Intra-channel
No averaging
256 averages
Inter-channel
No averaging
256 averages
  TimeInterval 2  Time Interval  2  TimeScale Delta  

 
 
± 5 i 
+
+ 
i




  Error (Edge1)   Error (Edge 2)    Accuracy   Time   


2
2


5  TimeInterval  Time Interval    TimeScale  Delta   

i
i 
±

 +
 + 
16  Error (Edge1)   Error (Edge 2)    Accuracy   Time   


2
  TimeInterval2  Time Interval  2
Interchannel 

5 i 

 +
 +
  Error (Edge1)   Error (Edge 2)   IntrinsicJitter 
±


  TimeScale  Delta   Inter channel


i
+  
+





  Accuracy   Time    SkewDrift 


2
2


5  TimeInterval  Time Interval 


i 
 +
 +


16  Error (Edge1)   Error (Edge 2) 
±

Scale
  Delta
   Inter channel

  Time

i
+
 +  Accuracy
  Time    Skew
Drift  


1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
3. Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, time interval error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed delta time measurement accuracy measurement value. Do not double the listed time scale accuracy value in delta time
measurement accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
6. External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7. Skew between channels caused by ± 5 ºC temperature change.
8. Initial = immediately after factory or user calibration.
27 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Acquisition
Maximum real-time sample rate
Maximum acquired time at highest
real-time resolution
Resolution
Standard
Option 50M
Option 100
Option 200
Option 500
Option 01G
Option 02G
Data transfer speed
Gigabit Ethernet
USB 2.0 hi-speed (device)
Sampling modes
Real-time
Real-time with averaging
Real-time with peak detect
Real-time with hi resolution
Equivalent-time
Segmented memory
Roll mode
Filters
Sin(x)/x Interpolation
91304A/91204A/90804A: 40 GSa/s (4 channels simultaneously)
90604A/90404A/90254A: 20 GSa/s (4 channels simultaneously)
91304A/91204A/90804A
90604A/90404A/90254A
25 ps (40 GSa/s)
0.5 ms
1.25 ms
2.5 ms
5.0 ms
12.5 ms
25.0 ms
50.0 ms
Samples:
MSa/s (Word):
MSa/s (Byte):
Samples:
MSa/s (Word):
MSa/s (Byte):
50 ps (20 GSa/s)
1.0 ms
2.5 ms
5.0 ms
10.0 ms
25.0 ms
50.0 ms
100.0 ms
1k
0.1
0.11
1k
0.11
0.11
64 k
1.88
1.88
64 k
1.88
1.88
1M
9.25
12.60
1M
8.34
11.60
16 M
12.00
19.70
16 M
8.55
14.40
32 M
12.80
20.30
32 M
9.07
14.90
128 M
12.80
22.00
128 M
11.38
18.10
Successive single-shot acquisitions
Selectable from 2 to 65534
91304A/91204A/90804A: 40 GSa/s
90604A/90404A/90254A: 20 GSa/s
Real-time boxcar averaging reduces random noise and increases resolution
Resolution: 338 fs
Full bandwidth on all 4 channels, 262,144 sample points maximum memory
Captures bursting signals at maximum sample rate without consuming memory during periods of inactivity
Minimum intersegment time:
91304A / 91204A / 90804A: 2.7 μs
90604A / 90404A / 90254A: 2.5 μs
(the time between the end of the previous acquisition and the beginning of the next acquisition)
Memory depth:
20 M
50 M
100 M
200 M
500 M
1G
2G
Max # of segments:
4096
8192
16384
32768
65536
131072
131072
Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates up to
10 MSa/s with a maximum record length of 40MS.
On/off selectable FIR digital filter. Digital signal processing adds points between acquired data points to enhance
measurement accuracy and waveform display quality.
28 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Hardware trigger
Sensitivity 2
91304A/91204A/90804A:
90604A/90404A/90254A 12:
Level range
Internal
Auxiliary
Sweep modes
Display jitter (trigger jitter) 2, 3, 4
Trigger sources
Trigger modes
Edge
Edge transition
Edge then edge (time)
Edge then edge (event)
Glitch
Line
Pulse width
Runt
Timeout
Pattern/pulse range
State
Setup/hold
Internal low 2:
Internal high 2:
Internal low 2:
Internal high 2:
Auxiliary:
2.0 div p-p 0 to 5 GHz
0.3 div p-p 0 to 4 GHz, 1.0 div p-p 4 to 7.5 GHz
2.0 div p-p 0 to 5 GHz
0.3 div p-p 0 to 3 GHz, 1.0 div p-p 3 to 5 GHz
DC to 100 MHz: 200 mV p-p into 50 Ω
100 MHz to 1 GHz: 500 mV p-p into 50 Ω
± 4 div from center screen or ± 4 Volts, whichever is smallest
± 5 V, also limit input signal to ± 5 V
Auto, triggered, single
620 fs rms
Channel 1, channel 2, channel 3, channel 4, aux, and line
Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on any channel
or auxiliary trigger.
Trigger on rising or falling edges that cross two voltage levels in > or < the amount of time specified. Edge transition
setting from 250 ps.
The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling edge on any
one selected input will generate the trigger.
The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling edges, another
rising or falling edge on any one selected input will generate the trigger.
Triggers on glitches narrower than the other pulses in your waveform by specifying a width less than your narrowest
pulse and a polarity. Triggers on glitches as narrow as 125 ps. Glitch range settings: < 250 ps to < 10 s.
Triggers on the line voltage powering the oscilloscope.
Trigger on a pulse that is wider or narrower than the other pulses in your waveform by specifying a pulse width and a
polarity. Triggers on pulse widths as narrow as 125 ps. Pulse width range settings: 250 ps to 10 s. Trigger point can
be “end of pulse” or “time out”.
Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Can be time qualified with minimum setting of 250 ps.
Trigger when a channel stays high, low, or unchanged for too long. Timeout setting: from 250 ps to 10 s.
Triggers when a specified logical combination of the channels is entered, exited, present for a specified period of time
or is within a specified time range or times out. Each channel can have a value of High (H), Low (L) or Don’t care (X).
Pattern trigger clocked by the rising, falling or alternating between rising and falling edge of one channel.
Triggers on setup, hold, or setup and hold violations in your circuit. Requires a clock and data signal on any two inputs
(except aux or line) channels as trigger sources. Setup and/or hold time must then be specified.
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to TIE value
expressed in the formula above using the minimum time scale accuracy value.
3. Value shown represents typical Display jitter for 91204A at 100 mV/div triggering on 500 mVpp 6 GHz sin wave signal.
4. Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped.
29 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Hardware trigger (Continued)
Trigger modes (Continued)
Window
Triggers on an event associated with a window defined by two-user adjustable thresholds. Event can be window
“entered,” “exited,” “inside (time qualified),” or “outside (time qualified)” voltage range. Trigger point can be “cross
window boundary” or “time out.” Time qualify range: from 250 ps to 10 s.
Video
Triggers from negative sync composite video, field 1, field 2, or alternating fields for interlaced systems, any
field, specific line, or any line for interlaced or non-interlaced systems. Supports NTSC, PAL-M (525/60), PAL,
SECAM (625/50), EDTV (480p/60), EDTV (576p/50), HDTV (720p/60), HDTV (720p/50), HDTV (1080i/60), HDTV
(1080i/50), HDTV (1080p/60), HDTV (1080p/50), HDTV (1080p/30), HDTV (1080p/25), HDTV (1080p/24), and
user-defined formats.
Trigger sequences
Three stage trigger sequences including two‑stage hardware (Find event (A) and Trigger event (B)) and one‑stage
InfiniiScan software trigger. Supports all hardware trigger modes except “edge then edge” and “video,” and
all InfiniiScan software trigger modes. Supports “delay (by time)” and “reset (by time or event)” between two
hardware sequences. The minimum latency between “find event (A)” and “trigger event (B)” is 3 ns.
Trigger qualification and qualifier
Single or multiple channels may be logically qualified with any other trigger mode
Trigger holdoff range
100 ns to 10 s
Trigger actions
Specify an action to occur and the frequency of the action when a trigger condition occurs. Actions include e-mail
on trigger and execute “multipurpose” user setting.
Trigger shortcuts
Provides easy shortcuts to all trigger features
Software trigger (requires InfiniiScan event identification software — Option 009)
Trigger modes
Generic serial
Software triggers on NRZ-encoded data up to 8.0 Gbps, up to 80‑bit pattern. Support multiple clock data
recovery methods including constant frequency, 1st‑order PLL, 2nd-order PLL, explicit clock, explicit 1st-order
PLL, explicit 2nd-order PLL, Fibre Channel, FlexRay receiver, FlexRay transmitter (requires E2688A except for the
constant frequency clock data recovery mode).
Measurement limit
Software triggers on the results of the measurement values. For example, when the “pulse width” measurement
is turned on, InfiniiScan measurement software trigger triggers on a glitch as narrow as 75 ps. When the “time
interval error (TIE)” is measured, InfiniiScan can trigger on a specific TIE value.
Non-monotonic edge
Software triggers on the non-monotonic edge. The non-monotonic edge is specified by setting a hysteresis value.
Runt
Software triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the
first again. Unlike hardware runt trigger, InfiniiScan runt trigger can be further qualified via a hysteresis value.
Zone qualify
Software triggers on the user defined zones on screen. Zones can be specified as either “must intersect” or “must
not intersect.” Up to four zones can be defined.
30 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Measurements and math
Maximum measurement update
rate
Measurement modes
Waveform measurements
Voltage
Time
Mixed
Frequency domain
Level qualification
Eye-diagram measurements
Jitter analysis measurements
Clock
Data
Timing
Statistics
Histograms
Source
Orientation
Measurements
1.
2.
3.
4.
5.
6.
7a.
7b.
7c.
8.
9.
10.
11.
12.
13.
> 42,000 measurement/sec (one measurement turned on)
> 122,000 measurement/sec/measurement (five measurements turned on)
Standard, Measure All edges mode
Peak to peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, preshoot, upper, middle, lower
Rise time, fall time, period, frequency, positive width, negative width, duty cycle, burst width, Tmin, Tmax, Tvolt,
setup time (requires Option 002, 004, or 070 standard on DSA models), hold time (requires Option 002, 004, or 070
standard on DSA models), channel-to-channel delta time, channel‑to-channel phase
Area, slew rate
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude
Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Fast eye rendering increases speed of the eye diagram rendering
Requires Option 002 (or E2681A), 004 (or N5400A), or 070 (or N8823A). Standard on DSA Series.
Time interval error (TIE) data with TIE band, high, low-pass filter, data rate, unit interval, clock recovery rate, burst
time, burst period, burst interval
Two sources: Setup time, hold time, phase, advanced
One source: Period, frequency, + width, width, duty cycle, burst width, rise time, fall time, slew rate
Displays the current, mean, minimum, maximum, range (max-min), standard deviation, number of measurements
value for the displayed automatic measurements
Waveform or measurement 13
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined
using waveform markers
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of
most hits), X scale hits, and X offset hits
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of scope/probe).
The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
Measurement threshold = fixed voltage at 50% level.
Time ranges ≤ 10 μs.
Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
Requires Option 010 user defined function.
11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
Typically triggers as low as 5 mV/div sensitivity.
Measurement histograms require EZJIT license.
31 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Measurements and math (Continued)
Mask testing
Allows pass/fail testing to user-defined or Keysight-supplied waveform templates. Automask lets you create a mask
template from a captured waveform and define a tolerance range in time/voltage or screen divisions. Test modes
(run until) include test forever, test to specified time or event limit, and stop on failure. Executes “multipurpose”
user setting on failure. “Unfold real time eye” feature will allow individual bit errors to be observed by unfolding a
real time eye when clock recovery is on. Communications mask test kit option provides a set of ITU-T G.703, ANSI
T1.102, and IEEE 802.3 industry-standard masks for compliance testing.
Waveform math
Number of functions
16
Hardware accelerated math
Differential and common mode
Operators
Absolute value, add, amplitude modulation, average, Butterworth 10, common mode, delay, differentiate, divide, FFT
magnitude, FFT phase, FIR 10, high pass filter, histogram (measurement), horizontal gate, integrate, invert,
LFE 10, low pass filter (4th‑order Bessel Thompson filter), magnify, max, measurement trend, min, multiply, RT Eye 10,
smoothing, SqrtSumOfSquare 10, square, square root, subtract, versus, and optional user defined function (Option
010)
FFT
DC up to 20 GHz (at 40 GSa/s) or 10 GHz (at 20 GSa/s)
Frequency range 5
Frequency resolution
Sample rate/memory depth = resolution
Best resolution at
91304A/91204A/90804A: 800 Hz
maximum sample rate
90604A/90404A/90254A: 400 Hz
Frequency accuracy
(1/2 frequency resolution) + (1 x 10-6)(signal frequency)
1.
2.
3.
4.
5.
6.
7a.
7b.
7c.
8.
9.
10.
11.
12.
13.
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of scope/probe).
The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
Measurement threshold = fixed voltage at 50% level.
Time ranges ≤ 10 μs.
Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
Requires Option 010 user defined function.
11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
Typically triggers as low as 5 mV/div sensitivity.
Measurement histograms require EZJIT license.
32 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Measurements and math (Continued)
FFT (Continued)
Signal-to-noise ratio 6
Window modes
Measurement modes
Automatic measurements
Multipurpose
Drag-and-drop measurement
toolbar
Snapshot
Marker modes
Display
Display
Intensity grayscale
Resolution XGA
Annotation
Grids
Waveform styles
60 dB to > 100 dB depending on settings
Hanning, flattop, rectangular, Blackman-Harris
Measure menu access to all measurements, ten measurements can be displayed simultaneously
Front-panel button activates ten pre-selected or ten user-defined automatic measurements
Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed
waveforms
Takes 29 snap shot measurements (customizable)
Manual markers, track waveform data, track measurements
12.1‑inch color XGA TFT-LCD with touch screen
256‑level intensity‑graded display
1024 pixels horizontally x 768 pixels vertically
Up to 12 labels, with up to 100 characters each, can be inserted into the waveform area
Up to 16 grids each with 8 bit vertical resolution
Connected dots, dots, infinite persistence, color graded infinite persistence. Includes up to 256 levels of
intensity‑graded waveforms.
Waveform update rate
Maximum waveform update
> 400,000 waveforms per second (when in the segment memory mode)
Computer system and peripherals, I/O ports
Computer system and peripherals
Operating system
Windows 7 Embedded Standard
CPU
Intel Core 2 Duo 3.06 GHz
PC system memory
4 GB DDR2 (standard)
≥ 250‑GB internal hard drive
Drives
Optional removable hard drive (Option 801)
Optional USB external DVD-RW drive (Option 820)
Peripherals
Logitech optical USB mouse, compact USB keyboard and stylus supplied. All Infiniium models support any
Windows-compatible input device with a serial, PS/2 or USB interface.
File types
Compressed internal format (*.wfm (200 Mpts)), comma‑separated values (*.csv (1 Gpts)), tab separated values
Waveforms (supported max
memory size)
(*.tsv (1 Gpts)), public binary format (.bin (500 Mpts)), Y value files (*.txt (1 Gpts)), hierarchal data file (*.hf5(1
Gpts)),
Images
BMP, PNG, TIFF, GIF or JPEG
I/O ports
LAN
RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled remote control, e-mail
on trigger or demand, data/file transfers and network printing (VXI-11). Recommended Web remote control tool:
Ultra VNC (http://www.ultravnc.com/).
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
33 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000A Series Oscilloscopes (Continued)
Performance characteristics (Continued)
Computer system and peripherals, I/O ports (Continued)
I/O ports (Continued)
PCI EXPRESS
PCI EXPRESS x4 link, enabled by sockets (optional- Option 823)
GPIB
IEEE 488.2, fully programmable (optional – Option 805)
RS-232 (serial)
COM1, printer and pointing device support
Parallel
Centronics printer port
PS/2
Two ports. Supports PS/2 pointing and input devices.
USB 2.0 hi-speed (host)
Three USB 2.0 hi-speed host ports on front panel plus four USB 2.0 Hi-Speed host ports on rear panel
USB 2.0 hi-speed (device)
One USB 2.0 hi-speed device port on rear panel that enables USB instrument control
Dual-monitor video output
15 pin XGA (1024x768), full color output of scope waveform display or dual monitor video output
Auxiliary output
DC (± 2.4 V); square wave (~715 Hz and ~456 MHz); trigger output (255 mV p-p into 50)
Trigger output
5 V 50 Ω back-terminated
Time base reference output
10 MHz filtered sine wave with all harmonics ≤ –40 dBc. Amplitude into 50 Ω: 800 mV p-p to 1.26 V p-p (4 dBm
± 2 dB) if derived from internal reference. Tracks external reference input amplitude ± 1 dB if applied and selected.
Time base reference input
Must be 10 MHz, input Z0 = 50 Ω. Minimum 500 mV p-p (–2 dBm), maximum 2.0 V p-p (+10 dBm).
LXI compliance
Functional Class C
General characteristics
Temperature
Operating: 5 °C to +40 °C; Non-operating: –40 °C to +65 °C
Humidity
Operating: up to 95% relative humidity (non-condensing) at +40 °C; Non-operating: up to 90% relative humidity at
+65 °C
Altitude
Operating: up to 4,000 meters (12,000 feet); Non-operating: up to 15,300 meters (50,000 feet)
Vibration
Operating random 0.21 g(rms), non-operating random 2.0 g(rms), swept sins (0.50 g(rms))
Power
100 to 240 VAC at 50/60 Hz; maximum input power 800 W
Weight
Net: 20 kg (44 lbs.)
Shipping: 27.4 kg (60 lbs.)
Dimensions (excluding handle)
Height: 283 mm (11.13 inch); Width: 432 mm (17.02 inch); Depth: 506 mm (19.91 inch)
Safety
Meets IEC 61010-1 +A2, CSA certified to C22.2 No.1010.1, self-certified to UL 3111
1.
2.
3.
4.
5.
6.
7a.
7b.
7c.
8.
9.
10.
11.
12.
13.
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
Measurement threshold = fixed voltage at 50% level.
Time ranges ≤ 10 µs.
Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
Requires Option 010 user defined function.
11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
Typically triggers as low as 5 mV/div sensitivity.
Measurement histograms require EZJIT license.
34 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
InfiniiMax II Series
Performance characteristics
Bandwidth 1
Rise and fall time
Probe only
When phase compensated by
90000A Series oscilloscope
System bandwidth (–3 dB)
Input capacitance 2
Input resistance 1
Input dynamic range
Input common mode range
Maximum signal slew rate
DC attenuation
Zero offset error referred to input
Offset range
Offset gain accuracy
Noise referred to input
Propagation delay
Maximum input voltage
ESD tolerance
Temperature
1169A, 1168A
1169A: > 12 GHz (13 GHz typical)
1168A: > 10 GHz
1169A: 28 ps (20 to 80%), 40 ps (10 to 90%)
1168A: 34 ps (20 to 80%), 48 ps (10 to 90%)
1169A with 91204A: 25 ps (20 to 80%)
1168A with 90804A: 38 ps (20 to 80%)
36 ps (10 to 90%)
54 ps (10 to 90%)
1169A with 91304A: 23 ps (20 to 80%)
33 ps (10 to 90%)
1169A with 91304A: 13 GHz (typical)
1168A with 90804A: 8 GHz
1169A with 91204A: 12 GHz
Cm = 0.09 pF
Cm is between tips
Cg = 0.26 pF
Cg is to ground for each tip
Cdiff = 0.21 pF
Differential mode capacitance = Cm + Cg/2
Cse = 0.35 pF
Single-ended mode capacitance = Cm + Cg
Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
3.3 V peak to peak, ± 1.65 V
6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz
25 V/ns when probing a single-ended signal
40 V/ns when probing a differential signal
3.45:1
± 1.5 mV
± 16.0 V when probing single-ended
< ± 1% of setting when probing single-ended
2.5 mV rms, probe only
~6 ns (this delay can be deskewed relative to other signals)
30 V peak, CAT I
> 8 kV from 100 pF, 300 Ω HBM
Operating: 5 °C to +40 °C
Non-operating: 0 °C to +70 °C
1. Denotes warranted specifications, all others are typical.
2. Measured using the probe amplifier and N5381A solder-in differential probe head.
35 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
InfiniiMax II Series (Continued)
Performance characteristics
Bandwidth 1
Rise and fall time (10% to 90%)
System bandwidth (–3 dB)
Input capacitance 2
Input resistance 1
Input dynamic range
Input common mode range
Maximum signal slew rate
DC attenuation
Zero offset error referred to input
Offset range
Offset accuracy
Noise referred to input
Propagation delay
Maximum input voltage
ESD tolerance
Temperature
1134A, 1132A, 1131A, 1130A
1134A: > 7 GHz
1131A: > 3.5 GHz
1132A: > 5 GHz
1130A: > 1.5 GHz
1134A: 60 ps
1131A: 100 ps
1132A: 86 ps
1130A: 233 ps
1134A with 90604A: 6 GHz
1132A with 90404A: 4 GHz
1131A with 90254A: 2.5 GHz
Cm = 0.10 pF
Cm is between tips
Cg = 0.34 pF
Cg is to ground for each tip
Cdiff = 0.27 pF
Differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF
Single-ended mode capacitance = Cm + Cg
Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
5.0 V peak to peak, ± 2.5 V
6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz
18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
< 30 mV before calibration on oscilloscope
< 5 mV after calibration on oscilloscope
± 12.0 V when probing single-ended
< ± 1% of setting when probing single-ended
3.0 mV rms
~6 ns (this delay can be deskewed relative to other signals)
30 V peak, CAT I
> 8 kV from 100 pF, 300 Ω HBM
Operating: 5 °C to +40 °C
Non-operating: 0 °C to +70 °C
1. Denotes warranted specifications, all others are typical.
2. Measured using the probe amplifier and N5381A solder-in differential probe head.
36 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000 Series Ordering Information
Infiniium DSA/DSO90000A Series oscilloscopes
Model
DSA/DSO91304A
DSA/DSO91204A
DSA/DSO90804A
DSA/DSO90604A
DSA/DSO90404A
DSA/DSO90254A
Bandwidth
13 GHz
12 GHz
8 GHz
6 GHz
4 GHz
2.5 GHz
Channels
4
4
4
4
4
4
Sample rate
40 GSa/s
40 GSa/s
40 GSa/s
20 GSa/s
20 GSa/s
20 GSa/s
Standard memory per channel
20 Mpts/50 Mpts (DSA)
20 Mpts/50 Mpts (DSA)
20 Mpts/50 Mpts (DSA)
20 Mpts/50 Mpts (DSA)
20 Mpts/50 Mpts (DSA)
20 Mpts/50 Mpts (DSA)
DSA Series comes with standard 50 Mpts memory, high speed serial data analysis
(Option 003/E2688A), EZJIT Complete jitter analysis software (Option 070/N8823A),
EZJIT Plus jitter analysis software (Option 004/N5400A), and EZJIT jitter analysis
software (Option 002/E2681A).
Standard accessories
USB optical mouse
USB keyboard
User’s quick-start guide
–– High-performance calibration cable (not included in DSA/
DSO90254A)
–– E2655B probe deskew and performance verification kit
–– Two 54855-67604 BNC-compatible to precision 3.5 mm (f) adapters
(not included in DSA/DSO90254A)
Power cord
Stylus pen
Note: No probes are included with the DSA/DSO90000A Series oscilloscopes. The InfiniiMax Series probes or
any other probes must be purchased separately.
Additional options and accessories
DSO90000A-1CM
Rack mount kit
DSO90000A-A61
ANSI Z540 compliant calibration
DSO90000A-801
Removable solid state drive
N2892A (requires
Additional removable solid state drive for 90000 Series with Windows 7
Option 801)
DSO90000A-805
GPIB card-interface
DSO90000A-807
1 MΩ, adapter with a 500 MHz passive probe
DSO90000A-820
DVD-RW
DSO90000A-821
Additional precision BNC to SMA adapters, qty 2
For post sales, order two 54855-67604 precision BNC’s
DSO90000A-822
External touchscreen monitor for Infiniium
DSO90000A-1A7
ISO17025 compliant calibration
Presales memory options
DSO90000A-20M
20 Mpts memory/CH upgrade
DSO90000A-50M
50 Mpts memory/CH upgrade 1
DSO90000A-100
100 Mpts memory/CH upgrade
DSO90000A-200
200 Mpts memory/CH upgrade
DSO90000A-500
500 Mpts memory/CH upgrade
DSO90000A-01G
1 Gpts memory/CH upgrade
1. Standard on DSA version oscilloscopes.
Mount your 90000 Series scope in a 19”
(487 mm) rack with option 1CM.
Quickly remove your hard drive for
additional security with Option 801.
37 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000 Series Ordering Information (Continued)
Factory installed
option for new
purchases
002
003
004
007
009
010
012
013
014
015
016
017
018
019
021
022
023
029
030
031
032
033
034
035
036
038
040
041
043
045
058
060
061
062
063
065
070
073
N8845A-1FP
—1
—2
User installed
standalone product
number
E2681A-1NL
E2688A-1NL
N5400A-1NL
N5391A-1NL
N5414B-1NL
N5430A-1NL
N5461A-1NL
N5465A-3NL
N5465A-1NL
N5462A-1NL
N5464A-1NL
N5463A-1NL
N8801A-1NL
N8802A-1NL
N5392B-3NL
N5393F-1FP
N5399C-3NL
N5416A-1NL
N5431A-1NL
U7233A-1NL
N5413B-1NL
U7231B-1NL
N5394A
U7238A
U7236A
N5411B-1NL
N5467B-1NL
U7243B-3NL
N5412D-3NL
U7232C-1NL
N6462A-1NL
N5392B
N8803A-1NL
N6467A-1NL
N8823A-1NL
N6466A-1NL
N8845A-2FP
—1
—2
SW applications
EZJIT jitter analysis software (standard on DSA Series)
High-Speed serial data analysis with clock recovery and 8b/10b decoding (standard on DSA Series)
EZJIT Plus jitter analysis software (standard on DSA Series)
Protocol triggering and decode I2C/SPI
InfiniiScan event identification software
Infiniium user-defined function application software
Serial Data Equalization
Basic InfiniiSim Waveform Transformation Toolset
Advanced InfiniiSim Waveform Transformation Toolset
RS-232/UART Protocol triggering and decode
USB 2.0 Protocol triggering and decode
PCI EXPRESS Protocol triggering and decode
SAS/SATA Protocol triggering and decode
MIPI D-PHY Protocol triggering and decode
Ethernet electrical performance validation and compliance software
PCI EXPRESS electrical performance validations and compliance software
HDMI 1.4 electrical performance validation and compliance software
USB 2.0 compliance test software
XAUI electrical validation with 10GBASE-CX4, CPRI, OBSAI, and Serial RapidIO
DDR1 and LPDDR compliance test applications
DDR2 and LPDDR2 compliance test applications
DDR3 and LPDDR3 compliance test applications
DVI compliance application
MIPI compliance test application
10GBASE-T Ethernet Electrical Compliance Application
SATA 6G Compliance Test Software
User Definable Application
USB 3.1 Compliance Test Software
Serial attached SCSI (SAS-2) electrical performance validation and compliance
DisplayPort 1.2 compliance test software
DDR4 and LPDDR4 compliance test application
10/100/1000BTe Energy Efficient Ethernet
MATLAB - Basic Digital Analysis Package
MATLAB - Standard Digital Analysis Package
CAN, LIN and FlexRay Protocal triggering and decode
BroadR-Reach compliance
EZJIT Complete jitter and noise analysis software (Standard on DSA Series)
MOST compliance
SPMI protocol trigger and decode
Generic Raw – NRZ protocol decode
Generic Raw – PAM-4 protocol decode
1. Standard with SDA option (firmware 6.0 and up).
2. Requires PAM-4 compliance app and SDA option (firmware 6.0 and up).
38 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 90000 Series Ordering Information (Continued)
Oscilloscope bandwidth upgrades
Upgrade
N5471A
N5471B
N5471C
N5471D
N5471E
Descriptions
DSA/DSO91204A to DSA/DSO91304A upgrade (12 to 13 GHz)
DSA/DSO90804A to DSA/DSO91204A upgrade (8 to 12 GHz)
DSA/DSO90604A to DSA/DSO90804A upgrade (6 to 8 GHz)
DSA/DSO90404A to DSA/DSO90604A upgrade (4 to 6 GHz)
DSA/DSO90254A to DSA/DSO90404A upgrade (2.5 to 4 GHz)
Oscilloscope memory upgrades
Upgrade
N5472A
N5472B
N5472C
N5472D
N5472E
N5472F
Descriptions
After-purchase 10 Mpts per channel to 20 Mpts per channel memory
upgrade
After-purchase 20 Mpts per channel to 50 Mpts per channel memory
upgrade
After-purchase 50 Mpts per channel to 100 Mpts per channel memory
upgrade
After-purchase 100 Mpts per channel to 200 Mpts per channel memory
upgrade
After-purchase 200 Mpts per channel to 500 Mpts per channel memory
upgrade
After-purchase 500 Mpts per channel to 1 Gpts per channel memory
upgrade
Operating system upgrades
Upgrade
N2753A
N2754A-002
Descriptions
Windows 7 for Infiniium 90000 scope with Windows XP and SN>MY50410100
Window 7 and M890 motherboard for Infiniium 90000 scopes with Windows
XP and SN <MY50410100
Rackmount kit upgrades
Upgrade
N5470A
Descriptions
Rackmount kit for Infiniium 90000A Series oscilloscope. Rackmount is seven
rack units long
For more information please consult the Installation Guide at
literature.cdn.keysight.com/litweb/pdf/N5470-92000.pdf.
Note: Order as many upgrades as
needed to reach the desired final
bandwidth of the instrument. For
example, to upgrade from a
DSA/DSO90804A to
DSA/DSO91304A order N5471B
and N5471A.
39 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Keysight Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
40 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. The business that became Keysight was a founding
member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo
are registered US trademarks of the PCI Industrial Computer Manufacturers
Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. The business that became Keysight was a founding
member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Download your next insight
Keysight software is downloadable
expertise. From first simulation through
first customer shipment, we deliver the
tools your team needs to accelerate from
data to information to actionable insight.
–– Electronic design automation (EDA)
software
–– Application software
–– Programming environments
–– Productivity software
Learn more at
www.keysight.com/find/software
Start with a 30-day free trial.
www.keysight.com/find/free_trials
41 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
Evolving Since 1939
Our unique combination of hardware, software, services, and people can help you
reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight.
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
http://www.keysight.com/find/emt_product_registration
Register your products to get up-to-date product information and
find warranty information.
Keysight Services
www.keysight.com/find/service
Keysight Services can help from acquisition to renewal across your
instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh,
consulting, training and more—helps you improve product quality
and lower costs.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure
your instruments are operating to specification, so you can rely on
accurate measurements.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and
product breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
cdma2000 is a US registered certification mark of the Telecommunications Industry Association.
For other unlisted countries:
www.keysight.com/find/contactus
(BP-9-7-17)
PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or
service marks of PCI-SIG.
DEKRA Certified
ISO9001 Quality Management System
MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any
use of such marks by Keysight Technologies is under license. Other service
marks and trade names are those of their respective owners.
WiMAX, Mobile WiMAX, WiMAX Forum, the WiMAX Forum logo, WiMAX
Forum Certified, and the WiMAX Forum Certified logo are US trademarks of
the WiMAX Forum.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2012 - 2017
Published in USA, September 13, 2017
5989-7819EN
www.keysight.com
Similar pages