TDK CS11ZU2GA472MAGKA High voltage ceramic capacitors automotive grade, safety standard approved Datasheet

C A P A C I T O R S
February 2016
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
Automotive Grade, Safety Standard Approved
CS series
Type:
CS [SL, B, Z5U characteristics, Eac: X1:440V, Y2:300V]
(2/9)
C A P A C I T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use
condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160219 / leaddisc_automotive_cs_en.fm
(3/9)
C A P A C I T O R S
Disc Type Capacitors with Lead
Product compatible with RoHS directive
Halogen-free
High Voltage Ceramic Capacitors, Automotive Grade, Safety Standard Approved
Overview of CS Series
FEATURES
AEC-Q200 compliant.
1,000 cycles guaranteed under heat shock testing at –55°C to +125°C.
It can be used as a Y capacitor for battery chargers used in automobiles (EV, PHEV).
Compliant with IEC and the safety standards of various countries.
Rated at a withstand voltage of AC.2600V.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in Y capacitor for battery chargers or air-conditioners used in automobiles.
PART NUMBER CONSTRUCTION
CS 80
Series
name
Type
45
ZU
2GA
222
M
A
□
K
A
Temperature
characteristics
Rated voltage
Nominal
capacitance
Capacitance
tolerance
Grade
classification
Lead type
Application
classification
Internal code
SL
+350 to
–1000ppm/°C
70
B
±10%
75
ZU
(Z5U)
+22, -56%
65
80
2GA
X1:440V
Y2:300V
100
10pF
J
±5%
221
220pF
K
±10%
M
±20%
472 4,700pF
A
For use in
automobiles
G Long lead
N Short lead
V
K
Safety
standard
A Halogen-free
Taping
85
95
11
Please refer to P-6~8 about the product dimensions.
OPERATING TEMPERATURE RANGE
Capacitance temperature
characteristics
SL
B
Z5U
Temperature range
Operating temperature
(°C)
–25 to +125
–25 to +125
–25 to +125
Storage temperature
(°C)
–25 to +125
–25 to +125
–25 to +125
The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(4/9)
C A P A C I T O R S
Overview of CS Series
PACKAGE QUANTITY
Package quantity
Type
Taping (pieces / box)
Bulk (pieces / bag)
1000
1000
CS
CERTIFIED STATUS OF VARIOUS COUNTRIES
Safety
standard
BSI
VDE
SEV
SEMKO
NEMKO
DEMKO
FIMKO
IMQ
SAA
CSA
UL
CQC
BS EN60384-14
IEC 60384-14
IEC 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
AS 3250
CSA-E60384-14
UL60384-14
GB/T14472-1998
KTL
K60384-14
Standard No.
Temperature
characteristics
SL, B, Z5U
Insulation sub-class and
rated voltage
X1: AC.440V
Y2: AC.300V
Approval report No.*
Taiwan
Xiamen
KM37103
40017930
15.0120
1406932
P12215336
D-01153
FI 27399
V3692
CS6268
1785515
E37861
CQC12001082619
CQC10001052862
Sub-Class:X1
SZ03001-12006
SU03047-12006
Sub-Class:Y2
SZ03001-12008
SU03047-12008
* Certificate numbers shall be changed owing to the revisions of the related standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(5/9)
C A P A C I T O R S
Overview of CS Series
RECOMMENDED FLOW PROFILE
Soldering
Preheating
Natural
cooling
T: Temperature
T2
T1
t1
t2
t3
t: Time
Preheating
Temp.
T1
110°C min.
Time
t1
30 to 60s.
Peak
Temp.
T2
260°C
Time
t2
Within 10s.
Natural cooling
Time
t3
Over 60s.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(6/9)
C A P A C I T O R S
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: SL (+350 to –1000ppm/°C)
Rated Voltage Edc: X1:440V, Y2:300V
Capacitance
(pF)
Capacitance
tolerance
10
15
22
33
47
68
±5%
±5%
±5%
±5%
±5%
±5%
Dimensions (mm)
D max.
T max.
7.0
7.0
7.0
7.0
8.0
9.0
7.0
7.0
7.0
7.0
7.0
7.0
F
(Applied to bulk)
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
F
(Applied to taping)
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
Part No.
d
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
CS45SL2GA100JA□KA
CS45SL2GA150JA□KA
CS45SL2GA220JA□KA
CS45SL2GA330JA□KA
CS45SL2GA470JA□KA
CS45SL2GA680JA□KA
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
D
Symbol V
Taping
T
D
T
16+1.5
–0.5
4max.
T
4max.
D
Symbol N
Bulk/Short lead
4max.
Symbol G
Bulk/Long lead
F
F
d
5±1
25min.
Vertical kink
F
d
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
7. Applications
Markings
CS
10
J
440〜X1
300〜Y2
54
—
(Underscore below date of production)
Specifications
CS series
10pF
±5%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
For use in automobiles
Marking examples
CS10J
54
(Marking position is reference.)
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(7/9)
C A P A C I T O R S
CS65,70,75,85 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: B (±10%)
Rated Voltage Edc: X1:440V, Y2:300V
Capacitance
(pF)
Capacitance
tolerance
100
150
220
330
470
680
±10%
±10%
±10%
±10%
±10%
±10%
Dimensions (mm)
D max.
T max.
7.0
7.0
7.0
7.5
9.0
9.5
7.0
7.0
7.0
7.0
7.0
7.0
F
(Applied to bulk)
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
F
(Applied to taping)
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
Part No.
d
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
CS65-B2GA101KA□KA
CS65-B2GA151KA□KA
CS65-B2GA221KA□KA
CS70-B2GA331KA□KA
CS75-B2GA471KA□KA
CS85-B2GA681KA□KA
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
D
Symbol V
Taping
T
D
T
16+1.5
–0.5
4max.
T
4max.
D
Symbol N
Bulk/Short lead
4max.
Symbol G
Bulk/Long lead
F
F
d
5±1
25min.
Vertical kink
F
d
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
7. Applications
Markings
CS
101
K
440〜X1
300〜Y2
54
—
(Underscore below date of production)
Specifications
CS series
100pF
±10%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
For use in automobiles
Marking examples
CS101K
54
(Marking position is reference.)
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(8/9)
C A P A C I T O R S
CS65,75,80,95,11 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: Z5U (+22, -56%)
Rated Voltage Edc: X1:440V, Y2:300V
Capacitance
(pF)
Capacitance
tolerance
1,000
1,500
2,200
3,300
4,700
±20%
±20%
±20%
±20%
±20%
Dimensions (mm)
D max.
T max.
7.0
8.0
9.5
12.0
13.5
7.0
7.0
7.0
7.0
7.0
F
(Applied to bulk)
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
7.5±1.5
F
(Applied to taping)
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
7.5±0.8
Part No.
d
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
0.6±0.05
CS65ZU2GA102MA□KA
CS75ZU2GA152MA□KA
CS80ZU2GA222MA□KA
CS95ZU2GA332MA□KA
CS11ZU2GA472MA□KA
* The part numbers are TDK’s standard specification products.
The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol V
Taping
T
T
4max.
D
4max.
D
T
4max.
D
Symbol N
Bulk/Short lead
16+1.5
–0.5
Symbol G
Bulk/Long lead
F
F
d
5±1
25min.
Vertical kink
F
d
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
5. TDK’s logogram
6. Date code
7. Applications
Markings
CS
102
M
440〜X1
300〜Y2
54
—
(Underscore below date of production)
Specifications
CS series
1000pF
±20%
X1: AC.440V
Y2: AC.300V
Production base code
2015.4
For use in automobiles
Marking examples
CS102M
54
(Marking position is reference.)
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
(9/9)
C A P A C I T O R S
CS Series
TAPING DIMEMSIONS
P
D
T
P2
Δh
C
S
W0
W
W1
L
H0
H1
W2
H0
A
Δh
P1 F
D0
ød
t
P0
Item
Symbol Dimensions(mm)
Body diameter
D
Depends on the specification of each product.
Body thickness
T
Depends on the specification of each product.
Lead-wire diameter
ød
0.6±0.05
Pitch of component
P
15.0±1.0
Including the slant of body
Feed hole pitch
P0
15.0±0.3
Excepting the tape splicing part
Feed hole center to lead
P1
3.75±0.7
Feed hole center to component center
P2
7.5±1.3
Lead-to lead distance
F
7.5±0.8
Measuring point is bottom kink
Component alignment
'h
0±2.0
Including the slanting body due to bending lead-wire
Tape width
W
18.0+1.0, –0.5
Adhesive tape width
W0
10.0min.
Hole position
W1
9.0±0.5
Adhesive tape position
W2
4.0max.
Bottom of kink from tape center
H0
16.0+1.5, –0.5
Height of body from tape center
H1
46.0max.
Feed hole diameter
D0
4.0±0.2
Total tape thickness
t
0.6±0.3
Length of snipped lead
L
11.0max.
Lead-wire protrusion
Remarks
Adhesive tape do not stick out the tape
1.0max.
Coating on lead
C
4.0max.
Height of kink
A
4.0max.
Spring action
S
2.0max.
Including adhesive tape
Measuring point is bottom kink
320max.
AMMO PACK INNER BOX SIZE
x.
ma
340max.
60
Dimensions in mm
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm
Similar pages