Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series : ZK Type : V High temperature Lead-Free reflow Features ● High capacitance and High ripple current compared with ZC series ● Endurance : 4000 h at 125 °C (High temperature / Long life) ● Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or ● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor 3 μF) (There are little characteristics change by temperature and frequency) available upon request. (08 mm and larger) ● Vibration-proof product is ● AEC-Q200 compliant ● RoHS directive compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan d) Endurance Shelf life Damp heat (Load) Resistance to soldering heat C D 33 μF to 47 μF 56 μF to 68 μF D8 F –55 °C to +125 °C 25 V.DC to 35 V.DC 100 μF to 150 μF 180 μF to 270 μF G 330 μF to 470 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Please see the attached standard products list 125 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω/100 kHz) (–40 °C) 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) 85 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30 % of the initial value tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value tan d Within the initial limit DC leakage current Within the initial limit 0.3 max. Series identification L Pressure relief (010 and larger) (P) + (I) Capacitance (μF) H Negative polarity marking (–) 47 E ZK A±0.2 – K Marking color : BLACK 0D±0.5 Example : 25 V.DC 47 μF (I) Dimensions (not to scale) B±0.2 Marking W ( ) Reference size (Unit : mm) Rated voltage mark Lot number Rated voltage mark E V 25 V.DC 35 V.DC Size code D L A, B C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.5 1.8 1.8 3.1 4.6 0.15 0.35 +- 0.20 + 0.15 0.35 - 0.20 0.15 0.35 +- 0.20 0.70±0.2 0.70±0.2 · The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2016 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Standard products Endurance : 125 °C 4000 h Case size (mm) Rated Capacitance voltage (±20 %) (V.DC) (μF) 25 35 fD L Specification Size code Ripple E.S.R. tan d current Standard (100 kHz) (120 Hz) (100 kHz) (+20 °C) Product (+20 °C) (+125 °C) (mΩ) (mA r.m.s.) 660 80 0.14 EEHZK1E470R 47 5 5.8 C 68 6.3 5.8 D 1080 50 Min. packaging q'ty Part number 0.14 EEHZK1E680P Vibration-proof product Taping (pcs) – 1000 – 1000 – 900 150 6.3 7.7 D8 1680 30 0.14 EEHZK1E151XP 270 8 10.2 F 1920 27 0.14 EEHZK1E271P EEHZK1E271V 470 10 10.2 G 2800 20 0.14 EEHZK1E471P EEHZK1E471V 33 5 5.8 C 660 100 0.12 EEHZK1V330R – 1000 56 6.3 5.8 D 1080 60 0.12 EEHZK1V560P – 1000 100 6.3 7.7 D8 1680 35 0.12 EEHZK1V101XP – 900 180 8 10.2 F 1920 27 0.12 EEHZK1V181P EEHZK1V181V 500 330 10 10.2 G 2800 20 0.12 EEHZK1V331P EEHZK1V331V 500 500 500 · Please refer to the page of “Reflow profile” and “The taping dimensions”. Frequency correction factor for ripple current Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Correction factor Correction factor Correction factor Correction factor 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 0.10 0.10 0.15 0.15 0.20 0.25 0.15 0.25 0.25 1 kHz < f < 2 kHz 0.30 0.40 0.45 10 kHz < f < 15 kHz 0.60 0.70 0.75 2 kHz < f < 3 kHz 0.40 0.45 0.50 3 kHz < f < 5 kHz 0.45 0.55 0.60 500 Hz < f < 1 kHz 0.20 0.30 0.30 5 kHz < f < 10 kHz 0.50 0.60 0.65 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.85 0.85 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz 0.80 0.85 1.00 0.85 0.90 1.00 0.85 0.90 1.00 500 kHz < f 1.05 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2016