MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Features Rev. V3 Functional Schematic** 75 Ω Terminations RF1 / RF2 Positive Voltage Control High Isolation: 90 dB @ 216 MHz Low Insertion Loss: 1.4 dB @ 2200 MHz Lead-Free 3 mm 16-Lead PQFN Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Description The MASW-009101 is a single pole double throw (SPDT) switch in a lead-free 3 mm 16-lead PQFN package. It meets FCC 15.115 specification of 80 dB isolation between RF1 and RF2 at 216 MHz during powered and un-powered states. The default on un-powered state provides a low insertion loss path from RFC to RF1 while maintaining high isolation between RF2 and RFC/RF1. This device is ideally suited for applications where low control voltage, high isolation, small size and low cost are required. ** Default On path shown Pin Configuration 3 Pin No. Pin Name Description 1 N/C No Connection 2 N/C No Connection 3 RFC RF Common Port 4 N/C No Connection 5 N/C No Connection 6 N/C No Connection 7 RF2 RF Port 2 8 GT2 RF Termination 9 N/C No Connection 10 V2 Control Voltage 2 11 V1 Control Voltage 1 12 N/C No Connection 13 GT1 RF Termination 14 RF1 RF Port 1 15 N/C No Connection 16 N/C No Connection Typical applications are to replace mechanical relays in CATV and satellite systems. This part can be used in all 75 Ω systems operating up to 3 GHz. The MASW-009101 is fabricated using a GaAs pHEMT process. The process features full passivation for performance and reliability. Ordering Information 1,2 Part Number Package MASW-009101-TR3000 3000 piece reel MASW-009101-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 17 3 PAD RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 75 Ω4 Parameter Test Conditions Insertion Loss RF1 to RFC 50 MHz 220 MHz 1000 MHz 2200 MHz Insertion Loss RF2 to RFC Units Min. Typ. Max. — 0.5 0.6 0.8 1.0 1.4 0.8 0.9 1.2 1.4 1.9 dB 50 MHz 220 MHz 1000 MHz 2200 MHz dB — 52 47 80 70 55 50 — 80 60 47 95 95 70 50 — — 25 20 15 13 — dBm — 28/18 — 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm — 40/37 — IIP2 (RF1/RF2) 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm — 58/53 — CSO (RF1/RF2) 132 channels, 18 dBmV / channel in dBc — -80/-70 — CTB (RF1/RF2) 132 channels, 18 dBmV / channel in dBc — -85/-85 — Trise, Tfall 10% to 90% RF, 90% to 10% RF ns — 16 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 120 — Transients In Band mV — 80 — Control Current |VC| = 3.0 V µA — 500 600 Isolation RFC-RF1/RF2 50 MHz 220 MHz 1000 MHz 2200 MHz Isolation RF1-RF2 50 MHz 220 MHz 1000 MHz 2200 MHz Return Loss 50 MHz 220 MHz 1000 MHz 2200 MHz dB Input P1dB (RF1/RF2) 1000 MHz IIP3 (RF1/RF2) dB dB Electrical Specifications: TA = 25°C, Z0 = 75 Ω4, Unpowered Operation Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RF1 to RFC 2200 MHz dB — — 1.4 Isolation RF1-RF2 50 MHz 220 MHz 1000 MHz 2200 MHz dB 60 47 90 90 70 50 — CSO / CTB 132 channels, 18 dBmV / channel in dBc — -80/-80 — 4. External 0.1 µF DC blocking capacitors are required on all RF In/Out and RF ground ports. See Application Schematic. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Truth Table 5 Rev. V3 Absolute Maximum Ratings 6,7 V1 V2 RFC - RF1 RFC - RF2 Parameter Absolute Maximum 0 0 On Off +29 dBm 1 0 On Off Input Power (5 - 3000 MHz, 3 V Control) 0 1 Off On Operating Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 5. Powered Operation: 1 = +3 to +5 V, 0 = 0 + 0.2 V. Unpowered Operation: V1 = V2 = 0 V, ΙV1-V2Ι ≤ 0.1 V. Application Schematic C1-C5 = 0.1 µF C6-C7 = 1000 pF 6. Exceeding any one or combination of these limits may cause permanent damage. 7. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. Off-Chip Component Values Component Value Package C1-C5 0.1 μF 0402 C6-C7 1000 pF 0402 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Recommended PCB Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Powered State Insertion Loss, RFC to RF2 Insertion Loss, RFC to RF1 0.0 0.0 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 +25°C -40°C +85°C -2.0 +25°C -40°C +85°C -2.0 -2.5 -2.5 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Isolation, RFC to RF1 Isolation, RFC to RF2 0 0 +25°C -40°C +85°C -20 +25°C -40°C +85°C -20 -40 -40 -60 -60 -80 -80 -100 -100 0.0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Powered State Isolation, RF1 to RF2 (RFC to RF2 State) Isolation, RF1 to RF2 (RFC to RF1 State) 0 0 +25°C -40°C +85°C -20 -20 -40 -40 -60 -60 -80 -80 -100 +25°C -40°C +85°C -100 0.0 0.5 1.0 1.5 2.0 2.5 0.0 0.5 Frequency (GHz) Input Return Loss, RFC 0 -10 -10 -20 -20 -30 -30 +25°C -40°C +85°C -40 0.5 1.5 2.0 2.5 Output Return Loss, RF1/RF2 0 0.0 1.0 Frequency (GHz) 1.0 1.5 Frequency (GHz) 2.0 2.5 +25°C -40°C +85°C -40 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Typical Performance Curves: Unpowered State Insertion Loss, RFC to RF1 (unpowered state) 0.0 -0.5 -1.0 -1.5 +25°C -40°C +85°C -2.0 -2.5 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Isolation, RF1 to RF2 (RFC to RF1 unpowered state) Isolation, RFC to RF2 (unpowered state) 0 0 -20 +25°C -40°C +85°C -20 +25°C -40°C +85°C -40 -40 -60 -60 -80 -80 -100 -100 0.0 0.5 1.0 1.5 2.0 2.5 0.0 0.5 Output Return Loss, RF1/RF2 (unpowered state) 1.5 2.0 2.5 Input Return Loss, RFC (unpowered state) 0 0 -10 -10 -20 -20 -30 1.0 Frequency (GHz) Frequency (GHz) -30 +25°C -40°C +85°C +25°C -40°C +85°C -40 -40 0.0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2.5 MASW-009101 SPDT Default On High Isolation CATV Switch 5 – 3000 MHz Rev. V3 Lead-Free 3 mm 16-Lead PQFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% tin over copper. 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice.