ON NGTD28T65F2WP Igbt die Datasheet

NGTD28T65F2
IGBT Die
Trench Field Stop II IGBT Die for motor drive and inverter
applications.
Features
• Extremely Efficient Trench with Field Stop Technology
• Low VCE(sat) Loss Reduces System Power Dissipation
www.onsemi.com
Typical Applications
•
•
•
•
Industrial Motor Drives
Solar Inverters
UPS Systems
Welding
VRCE = 650 V
IC = Limited by TJ(max)
MAXIMUM RATINGS
IGBT DIE
Parameter
Symbol
Value
Unit
Collector−Emitter Voltage, TJ = 25°C
VCE
650
V
IC
(Note 1)
A
IC, pulse
200
A
VGE
±20
V
TJ
−55 to +175
°C
TSC
5.0
ms
DC Collector Current, limited by
TJ(max)
Pulsed Collector Current (Note 2)
Gate−Emitter Voltage
Maximum Junction Temperature
Short Circuit Withstand Time,
VGE = 15 V, VCE = 500V, TJ ≤ 150°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Depending on thermal properties of assembly.
2. Tpulse limited by Tjmax, 10 ms pulse, VGE = 15 V.
C
G
E
DIE OUTLINE
MECHANICAL DATA
Parameter
Value
Unit
6000 x 4500
mm2
See die layout
mm2
Gate Pad Size
400 x 680
mm2
Die Thickness
3
mils
Die Size
Emitter Pad Size
Wafer Size
150
mm
4 mm AISI
Top Metal
2 mm TiNiAg
Back Metal
Max possible chips per wafer
459
Passivation frontside
Oxide−Nitride
Reject ink dot size
25 mils
Recommended storage environment:
In original container, in dry nitrogen,
or temperature of 18−28°C,
30−65%RH
Type: Bare
Wafer in Jar
Storage time:
< 36 months
Type: Die on
tape in
ring−pack
Storage time:
< 3 months
ORDERING INFORMATION
Device
Inking?
Shipping
NGTD28T65F2WP
Yes
Bare Wafer in Jar
NGTD28T65F2SWK
Yes
Sawn Wafer on Tape
© Semiconductor Components Industries, LLC, 2016
March, 2016 − Rev. 0
1
Publication Order Number:
NGTD28T65F2WP/D
NGTD28T65F2
ELECTRICAL CHARACTERISTICS (TJ = 25°C, unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Collector−Emitter Breakdown Voltage
VGE = 0 V, IC = 500 mA
V(BR)CES
650
Collector−Emitter Saturation Voltage
VGE = 15 V, IC = 75 A
VCE(sat)
Gate−Emitter Threshold Voltage
VGE = VCE, IC = 350 mA
VGE(TH)
Collector−Emitter Cutoff Current
VGE = 0 V, VCE = 650 V
Gate Leakage Current
VGE = 20 V, VCE = 0 V
Typ
Max
Units
STATIC CHARACTERISTICS
V
1.75
2.0
V
5.5
6.5
V
ICES
0.1
mA
IGES
200
nA
4.5
DYNAMIC CHARACTERISTICS
Input Capacitance
VCE = 20 V, VGE = 0 V, f = 1
MHz
Output Capacitance
Reverse Transfer Capacitance
Cies
7500
pF
Coes
300
pF
Cres
190
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
DIE LAYOUT
E
G
E
E = Emitter pad
G = Gate pad
All dimensions in mm
www.onsemi.com
2
NGTD28T65F2
Further Electrical Characteristic
Switching characteristics and thermal properties are depending strongly on module design and mounting technology and can
therefore not be specified for a bare die.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
3
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NGTD28T65F2WP/D
Similar pages