IES-0823 6 GE + 2 SFP Unmanaged Switch -20 to 60C, DIN-rail Overview Safety High Reliability Plug & Play Redundancy Reliability LevelOne IES-0823 Industry Ethernet Switch provides 6 ports of Gigabit Ethernet plus 2 1000Base SFP slots to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. Moreover, the SFP slots support pluggable modules that enabling you to choose from a variety of transceivers. All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. This redundant power system is designed to meet the challenge of power failure to ensure reliability and constant availability. Single power design works fine in non-critical network applications, but it falls short drastically for network applications in transportation, automate production or banking. This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and off 6,000 times while loaded, with no single failure. It’s highly reliability and safety measurement to ensure field hardened, especially for the harsh environment. This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. Rugged IP30 rated aluminium housing is designed for industrial applications. With protection against ingress of dirt and solid metal housing to ensure a long-last operating life under harsh environments Features - Provides 6 10/100/1000Base-T ports and 2 SFP ports - Gigabit combo port can choose to use either 1000BASE-SX/LX/SFP interface or 10/100/1000BASE-TX interface - Supports 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Supports jumbo frame up to 9KB - Redundant power inputs (12 - 32VDC) with Terminal Block and DC Jack (12VDC) - Alarms for power failure by relay output - -20°C to 60°C (-4°F to 140°F) and is tested for functional operation @-30°C to 70°C (-22°F to 158°F). - Provides DIN-rail or panel mounting - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Diagrams Unit: mm 110 68 135 DC12V/3A Front Back Side Top/Buttom Specifications Technology Environment Standards IEEE802.3 10BASE-T, 802.3u 100BASE -TX/FX, 802.3ab 1000BASE-T, 802.3z 1000BASE-SX/LX, IEEE802.3x Forward and Filtering Rate 14,880pps for 10Mbps Operating Temperature -20°C to 60°C (-4°F to 140°F) Tested @ -30°C to 70°C (-22°F to 158°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) 148,810pps for 100Mbps 1,488,100pps for 1000Mbps Packet Buffer Memory 1.125M bits Processing Type Store-and-Forward Address Table Size 8192 MAC addresses Half-duplex back-pressure and IEEE802.3x full-duplex flow control Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A, VCCI EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM 3V/m, 1400 to 2000MHz; 80% AM 1V/m, 2000 to 2700MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-Earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.) Power Input Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack) Power Consumption 6.7W Max. 0.52A @ 12VDC, 0.26A @ 24VDC Overload Current Protection Present Reverse Polarity Protection Present Mechanical Casing Aluminum case IP30 Dimensions 68mm (W) x 110mm (D) x 135mm (H) (2.68" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.761lbs.) Installation DIN-Rail (Top hat type 35mm), Panel Mounting Interface Ethernet Port Gigabit: 8 ports (2 Fiber combo ports included) LED Indicators Per Unit: Power Status (Power 1, Power 2, Power 3) Per Port: Link/Activity (Green: 10/100Mbps, Orange: 1000Mbps) Alarm Contact One relay output with current 1A @ 24VDC Order Information IES-0823- 6 GE + 2 SFP Unmanaged Switch -40 to 75C, DIN-rail Package Contents IES-0823 Quick Installation Guide Optional Accessories SFP-4200 SFP-4210 SFP-4240 SFP-4270 SFP-4310 SFP-4320 - 1.25G MMF SFP Transceiver (550m, 850nm, -20 to 85C) 1.25G SMF SFP Transceiver (10km, 1310nm, -40 to 85C) 1.25G SMF SFP Transceiver (40km, 1310nm, -40 to 85C) 1.25G SMF SFP Transceiver (70km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (10km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (10km, 1550nm, -40 to 85C) SFP-4330 SFP-4340 SFP-4350 SFP-4360 SFP-4370 SFP-4380 - 1.25G BIDI SMF SFP Transceiver (20km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (20km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (40km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (40km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (60km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (60km, 1550nm, -40 to 85C) www.level1.com one world_one brand_one level_