ON NGTB30N60L2WG N-channel igbt Datasheet

Ordering number : ENA2308B
NGTB30N60L2WG
N-Channel IGBT
With Low VF Switching Diode
600V, 30A, VCE(sat);1.4V
http://onsemi.com
Features
Electrical Connection
• IGBT VCE(sat)=1.4V typ. (IC=30A, VGE=15V)
• IGBT IC=100A (Tc=25°C)
• IGBT tf=80ns typ.
• Low switching loss in higher frequency applications
• Maximum junction temperature Tj=175°C
• Diode VF=1.7V typ. (IF=30A)
• Diode trr=70ns typ.
• 5μs short circuit capability
• Pb-free, Halogen-free and RoHS Compliance
C
G
N-channel
E
Applications
• Power factor correction of white goods appliance
Specifications
Absolute Maximum Ratings at Ta = 25°C, Unless otherwise specified
Parameter
Symbol
Collector to Emitter Voltage
VCES
Gate to Emitter Voltage
@Tc=25°C *2
Limited by Tjmax
@Tc=100°C *2
IC *1
C
TO−247
CASE 340AK
E
Unit
600
VGES
Collector Current (DC)
Pulsed collector current,
Value
G
V
±20
V
100
A
30
A
Marking
A
@Tc=100°C *2
ICpulse
60
ICpeak
232
A
IO
30
A
PD
225
W
Junction Temperature
Tj
175
°C
Storage Temperature
Tstg
−55 to +175
°C
tp=100ms limited by Tjmax
Pulsed collector current,
tp=1ms limited by Tjmax
Diode Average Output Current
GTB30N
60L2 LOT No.
Power Dissipation
Tc=25°C (Our ideal heat dissipation condition) *2
Note :
*1 Collector Current is calculated from the following formula.
Tjmax - Tc
IC(Tc)=
Rth(j-c)×VCE(sat) (IC(Tc))
*2 Our condition is radiation from backside.
The method is applying silicone grease to the backside of the device and attaching
the device to water-cooled radiator made of aluminum.
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
ORDERING INFORMATION
See detailed ordering and shipping information on page 8 of this data sheet.
Semiconductor Components Industries, LLC, 2014
August, 2014
80414TKIM TC-00003141/60314HK TC-00003126/31814TKIM No.A2308-1/8
NGTB30N60L2WG
Electrical Characteristics at Ta = 25°C, Unless otherwise specified
Value
Parameter
Symbol
Conditions
Unit
min
Collector to Emitter Breakdown Voltage
Collector to Emitter Cut off Current
V(BR)CES
ICES
IC=500μA, VGE=0V
VCE=600V, VGE=0V
Gate to Emitter Leakage Current
IGES
VGE=±20V, VCE =0V
Gate to Emitter Threshold Voltage
VGE(th)
VCE =20V, IC=250μA
VCE(sat)
VGE=15V, IC=30A
VGE=15V, IC=50A
Diode Forward Voltage
VF
Input Capacitance
Cies
Output Capacitance
Coes
Reverse Transfer Capacitance
Cres
Turn-ON Delay Time
td(on)
Rise Time
tr
Turn-ON Time
ton
Turn-OFF Delay Time
td(off)
Fall Time
tf
Turn-OFF Time
toff
Turn-ON Energy
max
600
V
Tc=25°C
10
μA
Tc=150°C
1
mA
±100
nA
4.5
Tc=25°C
Collector to Emitter Saturation Voltage
typ
1.4
6.5
V
1.6
V
Tc=150°C
1.7
V
Tc=25°C
1.65
V
IF=30A
VCE =20V, f=1MHz
VCC=300V, IC=30A
RG=30Ω, L=200μH
VGE=0V/15V
Vclamp=400V
1.7
V
4130
pF
114
pF
96
pF
100
ns
60
ns
540
ns
390
ns
80
ns
500
ns
Eon
0.31
mJ
Turn-OFF Energy
Eoff
1.14
mJ
Turn-ON Delay Time
td(on)
98
ns
Rise Time
tr
85
ns
Turn-ON Time
ton
Turn-OFF Delay Time
td(off)
Fall Time
tf
VGE=0V/15V
Vclamp=400V
Turn-OFF Time
toff
See Fig.1, See Fig.2
530
ns
Turn-ON Energy
Eon
0.638
mJ
Turn-OFF Energy
Eoff
2.755
mJ
Total Gate Charge
Qg
166
nC
Gate to Emitter Charge
Qge
Gate to Collector “Miller” Charge
Qgc
Diode Reverse Recovery Time
trr
See Fig.1, See Fig.2
VCC=300V, IC=50A
RG=30Ω, L=200μH
VCE =300V, VGE=15V, IC=30A
IF=10A, di/dt=100A/μs, VCC=50V, See Fig.3
650
ns
380
ns
90
ns
40
nC
70
nC
70
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Thermal Characteristics at Ta = 25°C, Unless otherwise specified
Parameter
Symbol
Thermal Resistance IGBT (Junction to Case)
Rth(j-c) (IGBT)
Thermal Resistance Diode (Junction to Case)
Rth(j-c) (Diode)
Thermal Resistance (Junction to Ambient)
Rth(j-a)
Conditions
Tc=25°C
(Our ideal heat dissipation condition)*2
Tc=25°C
(Our ideal heat dissipation condition)*2
Value
Unit
0.67
°C /W
1.5
°C /W
41
°C /W
Note : *2 Our condition is radiation from backside.
The method is applying silicone grease to the backside of the device and attaching
the device to water-cooled radiator made of aluminum.
No.A2308-2/8
NGTB30N60L2WG
No.A2308-3/8
NGTB30N60L2WG
No.A2308-4/8
NGTB30N60L2WG
No.A2308-5/8
NGTB30N60L2WG
No.A2308-6/8
NGTB30N60L2WG
Fig.1 Switching Time Test Circuit
Fig.2 Timing Chart
VGE
90%
10%
0
IC
90%
0
VCE
90%
10%
10%
tf
td(off)
toff
10%
10%
tr
td(on)
ton
Fig.3 Reverse Recovery Time Test Circuit
No.A2308-7/8
NGTB30N60L2WG
Package Dimensions
NGTB30N60L2WG
TO-247
CASE 340AK
ISSUE O
unit : mm
Ordering & Package Information
Device
NGTB30N60L2WG
Package
TO-247-3L
Shipping
note
30
pcs. / tube
Pb-Free
and
Halogen Free
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
PS No.A2308-8/8
Similar pages