Frontier GP10-005R 1a general purpose plastic rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
1A GENERAL PURPOSE PLASTIC RECTIFIER
GP10-005R THRU GP10-16R
FEATURES
z LOW FORWARD VOLTAGE
z HIGH CURRENT CAPABILITY
z LOW LEAKAGE CURRENT
z HIGH SURGE CAPABILITY
z LOW COST
z BEVEL ROUND CHIP, AVALANCHE OPERATION
1.0(25.4)
MIN
.034(0.9)
.028(0.7)
.205(5.2)
.166(4.2)
MECHANICAL DATA
z CASE: DO41, MOLDED PLASTIC USE UL 94V-0 RECOGNIZED
FLAME RETARDANT EPOXY, DIMENSIONS IN INCHES
AND (MILLIMETERS)
zTERMINALS: AXIAL LEADS, SOLDERABLE PER MIL-STD202,METHOD 208
z POLARITY: COLOR BAND DENOTES CATHODE
z WEIGHT: 0.34 GRAMS
.107(2.7)
.080(2.0)
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
UNITS
RATINGS
SYMBOL
-005R -01R -02R -04R -06R -08R -10R -13R -15R -16R
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
VRRM
50
100 200 400 600 800 1000 1300 1500 1600
V
MAXIMUM RMS VOLTAGE
VRMS
35
70
140 280 420 560 700 910 1050 1120
V
MAXIMUM DC BLOCKING VOLTAGE
VDC
50
100 200 400 600 800 1000 1300 1500 1600
V
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
IO
1.0
A
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
IFSM
50
A
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL THERMAL RESISTANCE (NOTE 2)
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
Rθja
50
℃/W
CJ
15
PF
STORAGE TEMPERATURE RANGE
TSTG
- 55 TO + 175
℃
OPERATING TEMPERATURE RANGE
TOP
- 55 TO + 175
℃
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10
UNITS
CHARACTERISTICS
SYMBOL
-005R -01R -02R -04R -06R -08R -10R -13R -15R -16R
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
1.1
V
MAXIMUM REVERSE CURRENT AT 25℃
IR
5
μA
MAXIMUM REVERSE CURRENT AT 100℃
IR
50
μA
NOTE:
1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20×20×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
GP10-005R THRU GP10-16R
Page: 1
RATINGS AND CHARACTERISTIC CURVE GP10-005R THRU GP10-16R
1.0
CURRENT (A)
Io-AVERAGE RECTIFIED
1.2
A=20 mm
0.8
A=10 mm
0.6
0.4
0.2
A=5.5 mm
10mm
10mm
A=COPPER
AREA
P.C.
BOARD
0
0
20
40
60
80 100 120 140 160 180
FORWARD SURGE CURRENT
AMPERES PK (HALF SINE-WAVE)
Fig. 1-MAXIMUM CURRENT RATING
EFFECT OF COPPER AREA.
RESISTIVE/INDUCTIVE
Fig. 5-MAXIMUM FORWARD SURGE
VS NUMBER OF CYCLES
50
40
30
20
10
0
1
TA-AMBIENT TEMPERATURE (OC)
1.0
RESISTIVE / INDUCTIVE LOADS
5
10
20
0.8
0.6
CAPACITIVE
LOADS
10mm
10mm
0.4
COPPER PC
AREA BOARD
5.5†mm
0.2
0 20 40 60 80 100 120 140 160 180
TA-AMBIENT TEMPERATURE (OC )
IR-REVERSE CURRENT (uA)
Io-AVERAGE RECTIFIED
CURRENT (A)
IPK
IAV
1000
500
200
100
50
20
10
5
2
1
.5
.2
.1
.05
.02
.01
1.0
L=5mm
L=10mm
L=20mm
0.8
0.6
0.4
0.2
10mm
10mm
COPPER PC
AREA BOARD
5.5†mm
0 20
40
60
80
100
120
140 160 180
TA-AMBIENT TEMPERATURE (OC)
GP10-005R THRU GP10-16R
TJ=100oC
TJ=75oC
TJ=50oC
TJ=25oC
100 200 300 400 500 600
Fig. 7-TYPICAL JUNCTION CAPACITANCE
CJ-JUNCTION CAPACITANCE
IO-AVERAGE RECTIFIED
CURRENT (A)
L=LEAD LENTH
TJ=125oC
PEAK INVERSE VOLTAGE
Fig. 3 MAXIMUM CURRENT RATING
EFFECT OF LEAD LENGTHS
RESISTIVE / INDUCTIVE LOAD
1.2
100
Fig. 6-TYPICAL REVERSE
CHARACTERISTIC
Fig. 2-MAXIMUM CURRENT RATING
CAPACITIVE LOAD,10 mm LEAD LENGTHS
1.2
10
No. OF CYCLES AT 60 Hz
100
10
0
1
10
100
VR-REVERSE VOLTAGE (V)
Page: 2
1000
RATINGS AND CHARACTERISTIC CURVE GP10-005R THRU GP10-16R
Fig. 8-FORWARD PULSE CURRENT
VS PULSE DURATION
10
10,000
+150oC
+25oC
IP-PULSE CURRENT (A)
IF-FORWARD CURRENT (A)
Fig. 4-TYPICAL FORWARD CHARACTERISTICS
1.0
0.1
.01
0.1 0.2
0.4 0.6
0.8
1.0 1.2 1.4
VF-FORWARD VOLTAGE(V)
GP10-005R THRU GP10-16R
1,000
100
10
0.1uS 1uS 10uS 100uS
1mS 10mS
PULSE DURATION (Seconds)
Page: 3
Similar pages