Omron G2RL24DC5 A power relay with various model Datasheet

PCB Relay
G2RL
A Power Relay with Various Models
• High-sensitivity (250 mW) and High-capacity (16 A) versions.
• Designed for cooking and HVAC controls: blower motor,
damper, active air purification, duct flow boost fans, etc.
• Conforms to VDE (EN61810-1). UL recognized/ CSA certiified
• Meets EN60335-1 requirements for household products.
• Clearance and creepage distance: 10 mm/10 mm.
• Tracking resistance: CTI>250
• Coil Insulation system: Class F.
• RoHS Compliant
Ordering Information
Classification
General-purpose
High-capacity
High-sensitivity
Contact form
Enclosure
ratings
SPST-NO
Flux protection
G2RL-1A
Fully sealed
Flux protection
SPDT
DPST-NO
DPDT
G2RL-1
G2RL-2A
G2RL-2
G2RL-1A4
G2RL-14
G2RL-2A4
G2RL-24
G2RL-1A-E
G2RL-1-E
---
---
Fully sealed
G2RL-1A4-E
G2RL-14-E
---
---
Flux protection
G2RL-1A-H
G2RL-1-H
---
---
Note: When ordering, add the rated coil voltage to the model number.
Example: G2RL-1A DC12
Rated coil voltage
Model Number Legend
G2RL-@@@-@
1
2
3
4
1. Number of Poles
1:
1 pole
2:
2 poles
2. Contact Form
None: @PDT
A:
@PST-NO
3. Enclosure Ratings
None: Flux protection
4:
Fully sealed
4. Classification
None: General purpose
E:
High capacity (1 pole)
H:
High sensitivity (1 pole)
Specifications
■ Coils Ratings for General-purpose and High-capacity Models
Rated voltage
5 VDC
12 VDC
24 VDC
48 VDC
Rated current
80.0 mA
33.3 mA
16.7 mA
8.96 mA
Coil resistance
62.5 Ω
360 Ω
1,440 Ω
5,358 Ω
Must operate voltage
70% max. of the rated voltage
Must release voltage
10% min. of the rated voltage
Max. voltage
180% of rated voltage (at 23°C)
Power consumption
Approx. 400 mW
Approx. 430 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
PCB Relay
G2RL
221
■ Coils Ratings for High-sensitivity Models
Rated voltage
5 VDC
12 VDC
24 VDC
Rated current
50.0 mA
20.8 mA
10.42 mA
Coil resistance
100 Ω
576 Ω
2,304 Ω
Must operate voltage
75% max. of the rated voltage
Must release voltage
10% min. of the rated voltage
Max. voltage
180% of rated voltage (at 23°C)
Power consumption
Approx. 250 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
■ Contact Ratings
Item
General-purpose Models
Number of poles
1 pole
Contact material
Ag Alloy (Cd free)
Load
Resistive load (cosφ=1)
Rated load
High-capacity Models
High-sensitivity Models
2 poles
1 pole
1 pole
12 A at 250 VAC
12 A at 24 VDC
(See note.)
8 A at 250 VAC
8 A at 30 VDC
(See note.)
16 A at 250 VAC
16 A at 24 VDC
(See note.)
10 A at 250 VAC
10 A at 24 VDC
(See note.)
Rated carry current
12 A (See note.)
8 A (70°C)/5 A (85°C)
(See note.)
16 A (See note.)
10 A (See note.)
Max. switching voltage
440 VAC, 300 VDC
Max. switching current
12 A
8A
16 A
10 A
Max. switching power
3,000 VA (4,000 VA)
2,000 VA
4,000 VA
2,500 VA
Note: Contact your OMRON representative for the ratings on fully sealed models.
■ Characteristics
Item
General-purpose
(High-capacity) Models
Number of poles
1 pole
Contact resistance
100 mΩ max.
Operate (set) time
15 ms max.
Release (reset) time
5 ms max.
General-purpose Models
2 pole
High-sensitivity Models
1 pole
Max. operating frequency Mechanical:18,000 operation/hr
Electrical:1,800 operation/hr at rated load
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
5,000 VAC, 1 min between coil and
contacts
1,000 VAC, 1 min between contacts
of same polarity
5,000 VAC, 1 min between coil and
contacts
2,500 VAC, 1 min between contacts of
different polarity
1,000 VAC, 1 min between contacts of
same polarity
5,000 VAC, 1 min between coil and
contacts
1,000 VAC, 1 min between contacts
of same polarity
Impulse withstand voltage 10 kV (1.2×50 μs) between coil and contact
Vibration resistance
Destruction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction:10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance
Destruction:1,000 m/s2 (approx. 100 G)
Malfunction:100 m/s2 (approx. 10 G)
Endurance (Mechanical)
20,000,000 operations (at 18,000 operations/hr)
Ambient temperature
Operating:–40°C to 85°C (with no icing)
Storage:–40°C to 85°C (with no icing)
Ambient humidity
5% to 85%
Weight
Approx. 12 g
Note: Values in the above table are the initial values.
222
PCB Relay
G2RL
■ Approved Standards
UL Recognized (File No. E41643) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Model
G2RL-1A
Contact form
Coil ratings
SPST-NO
G2RL-1
SPDT
G2RL-1A-E
SPST-NO
3 to 48 VDC
Contact ratings
12 A at 250 VAC (General use)
12 A at 24 VDC (Resistive)
G2RL-1-E
SPDT
G2RL-1A-H
SPST-NO
3 to 48 VDC
16 A at 250 VAC (General use)
5 to 24 VDC
10 A at 250 VAC (General use)
10 A at 24 VDC (Resistive)
3 to 48 VDC
8 A at 277 VAC (General use)
8 A at 30 VDC (Resistive)
16 A at 24 VDC (Resistive)
G2RL-1-H
SPDT
G2RL-2A
DPST-NO
G2RL-2
DPDT
Note: Consult Omron for additional UL / CSA ratings
VDE (EN61810-1) (License No. 119650)
Model
Contact form
Coil ratings
Contact ratings
G2RL-1(A)
1 pole
5, 12, 18, 22, 24, 48 VDC
12 A at 250 VAC (cosφ=1)
12 A at 24 VDC (L/R=0 ms)
AC15: 3 A at 240 VAC
DC13: 2.5 A at 24 VDC, 50 ms
G2RL-1(A)-E
1 pole
5, 12, 18, 22, 24, 48 VDC
16 A at 250 VAC (cosφ=1)
16 A at 24 VDC (L/R=0 ms)
AC15:
3 A at 240 VAC (NO)
1.5 A at 240 VAC (NC)
DC13:
2.5 A at 24 VDC (NO), 50 ms
G2RL-1(A)-H
1 pole
5, 9, 12, 24 VDC
10 A at 250 VAC (cosφ=1)
10 A at 24 VDC (L/R=0 ms)
G2RL-2(A)
2 poles
5, 12, 18, 22, 24, 48 VDC
8 A at 250 VAC (cosφ=1)
8 A at 24 VDC (L/R=0 ms)
AC15:
1.5 A at 240 VAC
DC13:
2 A at 30 VDC, 50 ms
Note: To achieve approved life cycles on sealed models, the relay should be vented by removing the “knock off vent nib” on top of relay case after
the soldering/washing process.
Electrical Life Data
G2RL-1-E
G2RL-1
G2RL-1-H
G2RL-2
16 A at 250 VAC (cosφ=1)
30,000 operations min.
16 A at 24 VDC
30,000 operations min.
8 A at 250 VAC (cosφ=0.4)
200,000 operation min. (normally open side operation)
8 A at 30 VDC (L/R=7 ms)
10,000 operation min. (normally open side operation)
12 A at 250 VAC (cosφ=1)
50,000 operations min.
12 A at 24 VDC
30,000 operations min.
5 A at 250 VAC (cosφ=0.4)
150,000 operation min. (normally open side operation)
5 A at 30 VDC (L/R=7 ms)
20,000 operation min. (normally open side operation)
10 A at 250 VAC (cosφ=1)
100,000 operations min.
10 A at 24 VDC
50,000 operations min.
8 A at 250 VAC (cosφ=1)
30,000 operations min.
8 A at 30 VDC
30,000 operations min.
Note: 1. The results shown reflect values measured using very severe test conditions i.e., Duty: 1 s ON/1 s OFF.
2. In order to obtain the full rated life cycles on the fully sealed models, the relay should be properly vented by removing the “knock off vent
nib” on top of the relay case after the soldering/washing process.
3. Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed
information for the electrical endurance under your test conditions.
PCB Relay
G2RL
223
Engineering Data
■ Maximum Switching Capacity
G2RL-1A-E, G2RL-1-E
AC resistive load
10
5
DC resistive
load
AC resistive load
10
DC resistive
load
5
1
1
0.5
0.5
0.1
G2RL-2A, G2RL-2
50
Switching current (A)
Switching current (A)
Switching current (A)
G2RL-1A, G2RL-1
50
5
10
20 30 50 100
5
10
20 30 50 100
0.1
500 1,000
0
5
10
Switching voltage (V)
Switching voltage (V)
DC resistive
load
500 1,000
■ Ambient Temperature
vs Rated Carry Current
250
Rated carry current (A)
Maximum coil voltage (%)
AC resistive load
20 30 50 100
Switching voltage (V)
■ Ambient Temperature
vs Maximum Coil Voltage
G2RL-1A-H, G2RL-1-H
Switching current (A)
DC resistive
load
5
1
0
500 1,000
AC resistive load
10
0.5
0.1
0
50
200
180
150
130
100
G2RL-1A-E, G2RL-1-E
G2RL-1A, G2RL-1
G2RL-1A-H, G2RL-1-H
G2RL-2A, G2RL-2
50
0
10
20
Switching voltage (V)
Must operate/must release voltage
(percentage of rated voltage) (%)
Sample: G2RL-14-E 24 VDC
40
50
60
70
80 85 90 100
Ambient temperature (°C)
Ambient temperature (°C)
Note: The maximum coil voltage refers to the maximum
value in a varying range of operating power
voltage, not a continuous voltage.
■ Ambient Temperature vs
Must Operate and
Must Release Voltages
100
30
Must operate voltage
Must release voltage
90 Quantity: 5
80
max.
70
min.
60
50
40
max.
30
min.
20
10
0
20
40
60
80
100
120
Ambient temperature (°C)
Note: Contact your OMRON representative for the data on fully sealed models.
■ Shock Malfunction
G2RL-1 (A)-E
G2RL-2 (A)
Y
Y
1,000
Sample:
G2RL-14 DC12V
Number of Relays: 5pcs
Z
Shock is applied in ±X,±Y,±Z
1,000 Conditions:
directions three times each
with and without energizing the
Relays to check the number of
malfunctions.
Requirement:
None malfunction 100m/s2
X'
1,000
130
1,000
Z'
1,000
NO contact
NO contact
1,000
X
NC contact
Y
150
1,000
Z'
Shock direction
X
X'
Sample:
G2RL-24 DC12V
Number of Relays: 5pcs
Z
Shock is applied in ±X,±Y,±Z
1,000 Conditions:
directions three times each
with and without energizing the
Relays to check the number of
malfunctions.
Requirement:
None malfunction 100m/s2
X'
1,000
1,000
X
NC contact
Shock direction
Y
Y'
224
PCB Relay
Z'
Unit: m/s
1,000
2
G2RL
Y'
X'
Z
Z
1,000
X
Y'
Z'
Unit: m/s
2
Y'
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G2RL-1A(-H), G2RL-1A4
12.7 max.
(12.5)*
29 max.
(28.8)*
Terminal Arrangement/
Internal Connection
(Bottom View)
1
Four, 1.3±0.1 dia.
holes
(2.5)
3
4
5
0.5
0.5
3.5
0.5
0.8
G2RL-1(-H), G2RL-14
12.7 max.
(12.5)*
29 max.
(28.8)*
* Indicates average dimensions.
(2.3)
20
Terminal Arrangement/
Internal Connection
(Bottom View)
1
2
Mounting Holes
(Bottom View)
3.5 3.5
3
Five, 1.3±0.1 dia.
holes
(2.5)
7.5
15.7 max.
(15.5)*
5
0.5
3.5
0.5
0.5
0.5
0.8
G2RL-1A-E, G2RL-1A4-E
12.7 max.
(12.5)*
29 max.
(28.8)*
4
(2.3)
* Indicates average dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
3
1
20
Mounting Holes
(Bottom View)
5
Six, 1.3±0.1 dia.
holes
(2.5)
4
7.5
15.7 max.
(15.5)*
6
8
0.5
0.5
0.5
0.8
G2RL-1-E, G2RL-14-E
12.7 max.
(12.5)*
29 max.
(28.8)*
(2.3)
Terminal Arrangement/
Internal Connection
(Bottom View)
2
20
Mounting Holes
(Bottom View)
5
5
(2.5)
4
3
Eight, 1.3±0.1 dia.
holes
7.5
15.7 max.
(15.5)*
8
0.5
3.5
0.5
0.5
0.5
0.8
G2RL-2A, G2RL-2A4
12.7 max.
(12.5)*
29 max.
(28.8)*
7
6
5
(2.3)
20
* Indicates average dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
3
1
Mounting Holes
(Bottom View)
5
Six, 1.3±0.1 dia.
holes
(2.5)
4
7.5
15.7 max.
(15.5)*
3.5
5
* Indicates average dimensions.
1
8
0.5
0.5
0.5
0.8
G2RL-2, G2RL-24
12.7 max.
(12.5)*
29 max.
(28.8)*
6 5
* Indicates average dimensions.
(2.3)
Terminal Arrangement/
Internal Connection
(Bottom View)
1
2
3
20
Mounting Holes
(Bottom View)
5
5
Eight, 1.3±0.1 dia.
holes
(2.5)
4
7.5
15.7 max.
(15.5)*
3.5
3.5
7.5
15.7 max.
(15.5)*
3.5
Mounting Holes
(Bottom View)
8
0.5
0.5
0.5
0.5
7
6
5
0.8 * Indicates average dimensions.
(2.3)
20
PCB Relay
G2RL
225
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1b
PCB Relay
09/11
G2RL
Specifications subject to change without notice
Printed in USA
Similar pages