SICK M40E-043010RR0 Multiple light beam safety device Datasheet

Online data sheet
M40S-043010AR0, M40E-043010RR0
M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
A
B
C
D
E
F
Ordering information
System part
Type
Part no.
Sender
M40S-043010AR0
1200015
M40E-043010RR0
1200032
Receiver
Other models and accessories
www.sick.com/M4000_Standard
Detailed technical data
Features
H
I
J
K
L
M
N
O
P
Q
R
S
T
Scanning range
0.5 m ... 70 m, configurable
Low scanning range
0.5 m ... 20 m
Great scanning range
9 m ... 70 m
Number of beams
4
Beam separation
300 mm
Response time
10 ms
Synchronization
Optical synchronisation
Integrated laser alignment aid
✔
Safety-related parameters
Type
Type 4 (IEC 61496)
Safety integrity level
SIL3 (IEC 61508)
SILCL3 (EN 62061)
Category
Category 4 (EN ISO 13849)
Performance level
PL e (EN ISO 13849)
PFHD (mean probability of a dangerous failure per hour)
6.6 x 10-9 (EN ISO 13849)
TM (mission time)
20 years (EN ISO 13849)
Safe state in the event of a fault
At least one OSSD is in the OFF state.
Functions
Functions
Delivery status
Restart interlock
✔
Internal
External device monitoring (EDM)
✔
Activated
Beam coding
✔
Uncoded
Sender test
✔
Deactivated
Configurable scanning range
✔
0.5 m ... 20 m
Configurable application diagnostic output
✔
Contamination (OWS)
2
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
Online data sheet | 2017-08-24 18:11:25
Subject to change without notice
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
Interfaces
System connection
Connection type Male connector M12, 8-pin
Permitted cable length ≤ 15 m 1)
Permitted cross-section ≥ 0.25 mm²
Configuration method
Configuration buttons
Display elements
LEDs
7-segment display
Fieldbus, industrial network
Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 2)
1)
2)
Depending on load, power supply and wire cross-section. The technical specifications must be observed.
For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Protection class
III (EN 50178)
Supply voltage VS
24 V DC (19.2 V DC ... 28.8 V DC) 1)
Residual ripple
≤ 10 % 2)
Power consumption
≤ 0.2 A: ≤ 0.6 A (depending on type)
Safety outputs (OSSD)
Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 3)
Switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS)
Switching voltage LOW ≤ 2 V DC
Switching current ≤ 500 mA
Diagnostic outputs
Type of output PNP semiconductor, short-circuit protected
Switching voltage HIGH 24 V DC (VS – 4.2 V DC ... VS)
Switching voltage LOW High resistance
Switching current ≤ 100 mA
1)
The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as
accessories from SICK.
2)
3)
Within the limits of VS.
Applies to the voltage range between –30 V and +30 V.
Mechanical data
Housing cross-section
52 mm x 55.5 mm
Housing material
Aluminum alloy ALMGSI 0.5
Surface treatment
Powder coated
Front screen material
Polycarbonate, scratch-resistant coating
Ambient data
Enclosure rating
IP65 (EN 60529)
Ambient operating temperature
–30 °C ... +55 °C
Storage temperature
–30 °C ... +70 °C
Air humidity
15 % ... 95 %, Non-condensing
Vibration resistance
5 g, 10 Hz ... 55 Hz (IEC 60068-2-6)
2017-08-24 18:11:25 | Online data sheet

Subject
to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
3
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Shock resistance
10 g, 16 ms (IEC 60068-2-29)
Other information
Wave length
950 nm
Integrated laser alignment aid
✔
Laser class 2 (IEC 60825-1), do not stare into beam!
Light source LED
Type of light Visible red light
Wave length 630 nm ... 680 nm
Power consumption ≤ 1 mW
Classifications
ECl@ss 5.0
27272703
ECl@ss 5.1.4
27272703
ECl@ss 6.0
27272703
ECl@ss 6.2
27272703
ECl@ss 7.0
27272703
ECl@ss 8.0
27272703
ECl@ss 8.1
27272703
ECl@ss 9.0
27272703
ETIM 5.0
EC001832
ETIM 6.0
EC001832
UNSPSC 16.0901
46171620
4
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
Online data sheet | 2017-08-24 18:11:25
Subject to change without notice
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
25
55.5 (2.19)
27.5
52 (2.05)
(0.98)
Dimensional drawing (Dimensions in mm (inch))
>20
(0.79)
(1.08)
1
S1
2
Optional (receiver only):
Design with integrated LED
Laser warning label
(receiver with
integrated alignment
aid only)
2
L2
L1
1
Mounting ranges for the
brackets
Laser output opening
(receiver with
integrated alignment
aid only)
14
(0.55)
3.5
(0.14)
1
2.2
(0.09)
10.5
(0.41)
13
Sliding nut groove for
side mounting
(0.51)
>20
(0.79)
12.5
23.5
(0.93)
(0.49)
71.2 (2.80)
14.4
(0.57)
99.8 (3.93)
S1
2
1
(0.04)
6
(0.24)
Cable socket M12 angled
(only with AS-Interface:
aligned)
2017-08-24 18:11:25 | Online data sheet

Subject
to change without notice
AS-Interface clip M12
(aligned)
47.5
(1.87)
(1.97)
Ca. 83 (3.27)
(connector range)
50
(1.30)
Ca. 43 (1.69)
(connector range)
33
(1.22)
Ca. 47 (1.85)
(connector range)
31
90°
Cable socket M12 with cable
(left) and cable plug M12 with
cable (right, optional, only on
receiver)
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
5
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
A
B
C
D
E
F
Number of beams
Beam separation S1
L1
L2
2
500 (19.69)
643 (25.31)
672 (26.46)
600 (23.62)
743 (29.25)
772 (30.39)
220 (8.66)
583 (22.95)
612 (24.09)
400 (15.75)
943 (37.13)
972 (38.27)
450 (17.72)
1,043 (41.06)
1,072 (42.20)
220 (8.66)
803 (31.61)
832 (32.76)
300 (11.81)
1,043 (41.06)
1,072 (42.20)
220 (8.66)
1,023 (40.28)
1,052 (41.42)
6
1,243 (48.94)
1,272 (50.08)
7
1,462 (57.56)
1,491 (58.70)
8
1,682 (66.22)
1,711 (67.36)
3
4
5
Connection diagram
M4000 Standard connected to UE10-3OS safety relay
H
I
J
K
L
M
N
O
P
Q
R
S
T
+24 V
M4000S
Standard
M4000R
Standard
2
+24 V
+24 V
2
BN
5
Test
RES
1
WH
S1
BN
ADO
3
GN
n.c.
n.c.
EDM
4
YE
n.c.
OSSD1
5
GR
6
n.c.
OSSD2
6
PK
7
GND
GND
7
BU
FE
SH
1
3
BU
4
SH
FE
FE
B1
B3
Y1
13
23
33
41
Y2
14
24
34
42
1)
H3
UE10-3OS
B2
B4
0V
E119914/00/2014-07-29
2) PELV
Task
Connection of an M4000 Standard multiple light beam safety device to a UE10-3OS safety relay.
Operating mode: with restart interlock and external device monitoring.
Operating characteristics
When the light path is clear and the UE10-3OS is de-energized and functioning correctly, the yellow LED on the receiver and the H3
lamp flash. The system is ready for switch-on and waits for an input signal/switch-on signal. The system is enabled by pressing and
releasing the S1 button. The OSSD1 and OSSD2 outputs are live, the UE10-3OS is switched on. On interruption of one or several of
the light beams, the UE10-3OS is de-energized by the OSSD1 and OSSD2 outputs.
Fault analysis
OSSD cross-circuits and short-circuits are detected and lead to the inhibited state (lock-out). The erroneous behavior of the
UE10-3OS will be detected. The shutdown function is retained. On manipulation (e.g., jamming) of the S1 button, the system does
not enable the output current circuits.
Comments
1)
Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous state
is disabled. For categories 4 and 3, this integration must be dual-channel (x/y paths). Single-channel insertion in the control (z
path) is only possible with a single-channel control and by taking the risk analysis into account.
2)
PELV in accordance with the requirements in EN 60204-1 / 6.4
Take note of the operating instructions of the integrated devices.
6
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
Online data sheet | 2017-08-24 18:11:25
Subject to change without notice
M40S-043010AR0, M40E-043010RR0 | M4000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
Recommended accessories
Other models and accessories
www.sick.com/M4000_Standard
Brief description
Type
Part no.
BEF-3WNGBAST4
7021352
4 pieces, Mounting kit 6, side bracket, rotatable, Zinc diecast
BEF-1SHABAZN4
2019506
4 pieces, Mounting kit 12, rotatable, swivel mount
BEF-2SMGEAKU4
2030510
AR60
1015741
AR60 adapter, M4000
4040006
Mounting brackets and plates
4 pieces, Mounting kit 1, mounting bracket, rigid, L-shaped, including fixing screws
and washers
Terminal and alignment brackets
Alignment aids
Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into
the beam!
Adapter AR60 for M4000 and M4000 Curtain
2017-08-24 18:11:25 | Online data sheet

Subject
to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK
7
Online data sheet
SICK at a glance
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
Worldwide presence:
Contacts and other locations – www.sick.com
SICK AG | Waldkirch | Germany | www.sick.com
Similar pages