Bonding & Grounding Hardware ® Diamond Bonding and Grounding Hardware Bonding Clamps Bonding Connector for Meter Pan (CATV Applications) •• Meter pan connector designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. •• Its unique design allows a fixed and positive mechanical contact without interfering with the opening of the meter pan front cover. •• Tighten screws to 20 in. lbs. torque. Installation: Part Number Description SC51-1 For #10/12/14 AWG Copper Ground Wire. Made of G90 Galvanize Steel + Trivalent Chromate Inner Pack Outer Pack -- 100 1. The tip of the stainless steel mounting screw is shaped to remove the paint at the point of contact, thus ensuring positive metal-to-metal contact with the top of the meter panel. (Always ensure that the bonding surface is cleaned of excess paint or rust before mounting the SC511 connector.) For heavily corrosive or marine environments. use of “RTV” silicone sealer is recommended at the contact point, between the screw tip and the top of the meter pan. 2. Back the bolt and nut from the connector enough to allow it to mount on one of the corner folds of the metal meter pan back corners. 3. Install the connector with the bottom edges gripping on the bottom fold of the fixed top cover of the metal meter pan. Under no circumstances is the bonding connector to be mounted on the front cover or any movable part of the metal meter pan. Tighten the bolt securely by applying sufficient torque (20 inch pound) to ensure a firm and positive connection on the metal meter pan. 4. Remove one inch of insulation from copper ground wire, use caution to avoid scoring or damaging ground wire. Insert grounding wire between washer and grounding nut. Wrap ground wire clockwise between washer and ground nut. Insure that slot in grounding washer is aligned with ground wire. Tighten grounding nut with CNW6 tool to secure ground wire. Do not over tighten. Double check that the grounding bolt is still firmly tight on the metal meter pan enclosure. If not, tighten it one quarter turn. Recommended for usage when no other approved grounding electrode is accessible. Customer Support: 800.800.6652 www.ppc-online.com 29 A BELDEN BRAND A BELDEN BRAND ® Diamond Bonding and Grounding Hardware Bonding Clamps Bonding Connector for Meter Pan (CATV Applications) •• Meter pan connector designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. •• Its unique design allows a fixed and positive mechanical contact without interfering with the opening of the meter pan front cover. •• Tighten screws to 20 in. lbs. torque. SC51-CF SC51CFKF81 Inner Pack Outer Pack Meter Pan Connector. For #10/12/14AWG Copper Ground Wire. Made of Stainless Steel. -- 100 SC51CF-81 Meter Pan Ground Block for Coaxial Cable with F81 connector. For #10/12/14AWG Copper Ground Wire. Made of Stainless Steel -- 100 SC51CFKF81 Meter Pan Ground Block for Coaxial Cable with F81 connector. For #10/12/14AWG Copper Ground Wire. Made of Stainless Steel -- 100 Inner Pack Outer Pack Part Number Description SC51-CF Bonding Connector for Meter Pan (Telephone Applications) SC51-2 Part Number Description SC51CF-85 SC51-1T Meter Pan Corner Bonding Connector for #14 to #10 AWG Copper Ground Wire. Connector made of G90 Galvanize Steel + Trivalent Chromate. -- 100 SC51-2 Meter Pan Corner Bonding Connector for #6AWG Copper Ground Wire. Made of G90 Galvanize Steel + Trivalent Chromate -- 100 SC51CF-85 Meter Pan Bonding Connector for #6AWG Copper Ground Wire. Made of Stainless Steel -- 100 Meter Box Ground Clamp •• Provides a convenient, quick installation of a reliable ground or bond for drops. •• 2 adjustable sizes: 6-1/2” to 10-1/2”, 11-1/2” to 15-1/2”. •• Stainless steel bolts, screw and washer. •• Mechanically galvanized ASTM B695. •• UL Listed. •• Will not restrict cover operation. •• Tighten screws to 20 in. lbs. torque. * Packages of 10 pieces each package. Part Number 40-20000 40-20001 40-20002 40-20003 40-20004 Description Meter Box Ground Clamp (S), #12-16 AWG Meter Box Ground Clamp (L), #12-16 AWG Meter Box Ground Clamp (S), #14-6 AWG Meter Box Ground Clamp (S), #14-6 AWG Meter Box Ground Clamp (S), #14-6 AWG Clamp Range 6.5"-10.5" 11.5"-15.5" 6.5"-10.5" 11.5"-15.5" 15.5"-21.5" Inner Pack --1* 1* 1* Outer Pack 50 50 5 5 5 IBT1 Meter Box Ground Clamp (S), #14-6 AWG 6.5"-10.5" 1* 5 IBT2 Meter Box Ground Clamp (S), #14-6 AWG 15.5"-21.5" 1* 5 www.ppc-online.com 30 A BELDEN BRAND Customer Support: 800.800.6652 Bonding & Grounding Hardware ® Diamond Bonding and Grounding Hardware Ground Blocks Grounding Blocks Part Number Description GBS81K SC12D2-SS Single Ground Block - Outdoor Precision F81 #14 AWG through #6 AWG Copper Ground Wire Single Ground Block with One Precision TBCF81 Connector - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Ch romate Single Ground Block with One Precision F81 Connector - 1GHz #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Chromate Single Ground Block with One Precision KF81-1 Connector - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Chromate Single Stainless Steel Ground Block with One Precision F81 Connector - 2GHz #14 to #10 AWG Copper Grounding Wire. Dual Ground Block with One Precision TBCF81 Connector - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Chromate Dual Ground Block with One Precision TBCF81 Connector - 3GHz. #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Chromate Dual Ground Block with Two Precision TBCF81 Connectors - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel + Trivalent Chromate Dual Stainless Steel Ground Block with Two Precision F81 Connectors - 2GHz #14 to #10 AWG Copper Grounding Wire. SC12D-SS Dual Stainless Steel Ground Block with One Precision F81 Connector. 2GHz. Made for #14 to #10AWG Copper Ground Wire GBS81K SC12N-81 SC12N81-1G SC12KF81-1 SC12KF81-1 SC12N-81 SC12-SS SC12DNS-81 SC12DNS81-25 SC12DN-81 SC12DNS-81 Inner Pack Outer Pack -- 500 -- 150 -- 150 -- 150 -- 150 -- 100 -- 100 -- 100 -- 100 100 Grounding Bracket •• Grounding bracket permits upgrading number of drops by mounting 2, 3 or 4 way splitters simply by using the SC09 splitter ring nut for mounting. •• Made of G90 Galvanize Steel + Trivalent Chromate.. Part Number SC46DN Description Accepts connector for #14 to #10 AWG Copper Grounding Wire Inner Pack Outer Pack -- 100 Splitter Ring Nut •• Splitter ring nut especially designed for converting the SC12DN grounding blocks to accept splitters. Customer Support: 800.800.6652 Part Number Description Inner Pack Outer Pack SC09-1 Brass, Nickel Plated, .172" Height 250 5,000 www.ppc-online.com 31 A BELDEN BRAND A BELDEN BRAND ® Diamond Bonding and Grounding Hardware Grounding Clamps Span Clamp •• Span clamp for steel messengered drop cable bonding applications. •• Unique locking design prevents rotation on steel strand. •• Mechanically galvanized ASTM B695. Part Number Description SC03E-2G For Two Steel Messenger Wires .051" to .072" Diameter Used on 1/4" (6.6m) Steel Strand Inner Pack Outer Pack -- 75 "I" Beam Grounding Clamp •• Grounding clamp used to bond a solid copper ground wire to steel structure. •• Mechanically galvanized ASTM B695. Part Number SC07GG Description I Beam Grounding Clamp for #14 to #10AWG Copper Ground Wire Inner Pack Outer Pack -- 125 Inner Pack Outer Pack 500 5,000 "B" Ground Wire Clamp •• Used to secure #6 AWG to #12 AWG ground wire runs. •• Mechanically galvanized ASTM B695. •• 7/32” hole diameter. •• 3/8” wide x 9/16” long. Part Number Description 23-80002 "B" Ground Wire Clamp Ground Wire Range #12 (.081") to #6 (.162") AWG Ground Connector •• Ground connector used to connect various size copper ground conductors with a firm mechanical contact. •• Made of pure copper with brass fastener. Part Number SC42-1 www.ppc-online.com 32 A BELDEN BRAND Description Connects #4 or #6AWG to #10, #12 or #14AWG Copper Ground Wire Inner Pack Outer Pack 150 1,800 Customer Support: 800.800.6652 Bonding & Grounding Hardware ® Diamond Bonding and Grounding Hardware Grounding Straps Copper Ground Strap •• Ground strap used to provide a fixed and permanent connection between a copper water pipe to a copper ground wire. •• Made of pure copper (ASTM B152-110) and brass fasteners (ASTM B16-360 and B134-260. •• All longitudinal dimensions are based on disassembled pieces. Part Number Description SC13B-1 6.5" Strap, Fits 1/2" to 1" Diameter Pipe to #10/12/14 AWG Copper Ground Wire 9" Strap, Fits 1/2" to 2-1/4" Diameter Pipe to #10/12/14 AWG Copper Ground Wire 12" Strap, Fits 1/2" to 3" Diameter Pipe to #10/12/14 AWG Copper Ground Wire SC13B-2 SC13B-3 Inner Pack Outer Pack -- 150 -- 200 -- 150 Galvanized Ground Strap •• Ground strap used to provide a fixed and permanent connection between a galvanized steel pipe and a copper ground wire. •• Made of G90 galvanized steel that meets Salt Test ASTM B117. Fasteners are made of brass, nickel plated (ASTM B16-360 and B134-260) to create a neutral for galvanized to copper connection. •• All longitudinal dimensions are based on disassembled pieces. Part Number SC13BZ-1 SC13BZ-2 SC13BZ-3 SC13BZ-4 Customer Support: 800.800.6652 Description 6.5" Strap, Fits 1/2" to 1" Diameter Pipe to #10/12/14 AWG Copper Ground Wire 9" Strap, Fits 1/2" to 2-1/4" Diameter Pipe to #10/12/14 AWG Copper Ground Wire 12" Strap, Fits 1/2" to 3" Diameter Pipe to #10/12/14 AWG Copper Ground Wire 23-3/4" strap. Fits 1/2" to 6" Diameter Pipe for #10/12/14 AWG Copper Ground Wire Inner Pack Outer Pack -- 150 -- 200 -- 150 -- 100 www.ppc-online.com 33 A BELDEN BRAND A BELDEN BRAND ® Diamond Bonding and Grounding Hardware Mechanical - Split Bolt Connectors, Jumper Clamps High Strength Split Bolt Connectors •• For copper to copper connections. •• High strength corrosion resistant copper alloy for use in bonding applications. •• Highly resistant to corrosion and seasonal cracking. •• Hex design nut of high strength corrosion-resistant bronze alloy. •• Pressure bar is copper. •• UL and CSA listed. Dimensions (In) Size A B C D Inner Pack Outer Pack DG2 #2 0.309 0.615 0.875 1.240 100 400 DG4 #4 0.209 0.453 0.688 0.984 100 800 DG6 #6 0.165 0.413 0.625 0.906 100 800 DG8 #8 0.146 0.413 0.562 0.854 100 800 Part Number Type K - Jumper Clamp •• For all combinations of aluminum, copper and steel conductors. •• Cast of high strength bronze alloy CDA836. •• Furnished with silicon bronze bolt and lockwasher. Lockwasher minimizes loosening of installed clamp. •• Parallel groove design; no need to remove bolt for installation. •• Only one size for all requirements from No. 8 solid copper to 1/0 ACSR or 2/0 copper. K1DS KULDS Part Number Description A BELDEN BRAND Outer Pack K1DS Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire, Tin Plated Clamp (except for 1 wire groove) with Galvanized Steel Bolt 100 600 K2DS Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire, Tin Plated Clamp with Galvanized Steel Bolt 100 600 K3DS Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire, Non-Plated Clamp with Galvanized Steel Bolt 100 600 KULDS Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire, Tin Plated Clamp with Bronze Bolt 100 600 www.ppc-online.com 34 Inner Pack Customer Support: 800.800.6652 Bonding & Grounding Hardware ® Diamond Bonding and Grounding Hardware Mechanical - Ground Rod Clamps Type JAB Ground Rod Clamps •• Cast of high strength corrosion resistant copper alloy CDA955. •• Hex head. •• Long bearing surface of clamp on ground wire secures ground connection. •• U.L. Listed for direct burial. JAB58HDS JAB34HDS JAB12HDS Nominal Rod Diameter Wire Range Dimensions (IN) Part Number IN MM Max Min Max (MM2) Min (MM2) JAB12H-DS 1/2 12.7 2 Str. 10 Sol. 33.6 5.2 JAB34H-DS 3/4 19.0 1/0 Str. 8 Sol. 53.4 8.3 JAB58H-DS 5/8 15.8 1/0 Str. 8 Sol. 53.4 8.3 A (Max) Socket Screw A (Max) Hex Bolt Screw Thread Size 7/16"1-19/32 2-3/32 14UNC 7/16"2 2-11/32 14UNC 7/16"1-27/32 2-13/64 14UNC B C D Package Quantity 15/16" 63/64" 11/16" 100 11/16" 1" 51/64" 50 51/64" 7/8" 19/32" 50 Type G Ground Rod Clamps •• A dependable ground connection offered at a substantial savings. •• Cast of high strength corrosion-resistant copper alloy CDA955. •• Hex head bolts. G5DS G4DS •• Simplified compact design will make a lasting, trouble-free connection. •• U.L. Listed for direct burial. G3DS Nominal Rod Diameter Wire Range Dimensions (IN) Min (MM2) A (Max) Bolt Part Number IN MM Max Min Max (MM2) G3-DS 3/8 9.5 4 Str. 10 Sol. 21.6 5.2 -- G4-DS 1/2 12.7 2 Str. 10 Sol. 33.6 5.2 -- G5-DS 5/8 15.8 2 Str. 10 Sol. 33.6 5.2 -- Customer Support: 800.800.6652 Screw Thread Size 5/16"18UNC 3/8"16UNC 3/8"16UNC B C D E Package Quantity 11/16" 1/2" 27/64" 3/8" 100 49/64" 21/32" 33/64" 1/2" 100 29/32" 19/32" 21/32" 1/2" 50 www.ppc-online.com 35 A BELDEN BRAND A BELDEN BRAND ® Diamond Bonding and Grounding Hardware Mechanical - Grounding Connectors and Clamps Die Cast Zinc Water Pipe Clamp •• Budget price clamps. •• Made of die cast zinc alloy with zinc plated screws. Conductor Range Part Number Water Pipe Size Maximum Minimum Package Quantity 1/2"-1" #2 Stranded #10 Solid 250 BJ1DS Cast Bronze Water Pipe Clamp •• For connecting grounding conductor to water pipe or copper tube. •• Cast of high strength, highly conductive copper alloy. •• Zinc plated crews plated for corrosion resistance. •• UL listed. Part Number Water Pipe Size Maximum Minimum A B C Package Quantity JDS 1/2"-1" #2 Stranded #10 Solid 2-3/4 2-11/32 23/32 100 Conductor Range www.ppc-online.com 36 A BELDEN BRAND Dimensions (IN) Customer Support: 800.800.6652 Bonding & Grounding Hardware ® Diamond Bonding and Grounding Hardware Mechanical - Grounding Connectors and Clamps Trailer Ground Clamp •• 7/16” tin plated hex head bolt installs with terminal wrench or crescent wrench. Square head bolt allows clamp to be installed with pliers. •• Ground wire hole access from four directions minimizes having to bend ground wire. •• Designed so ground wire may be installed on clamp prior to mounting the clamp on metal frame, reducing installation time. •• Beam and ground wire connection can be separately tightened without disconnect integrity of ground circuit. •• High strength copper alloy CDA956 (91% nominal) providing greater conductivity, durability and excellent corrosion resistant characteristics without reliance on plating. •• High strength anchoring bolt penetrates paint. •• Bolts are electro-galvanized. Blade-type ground wire screw is tin-plated. Customer Support: 800.800.6652 Unit Quantity Standard Package Square Head - 15/16" - 18UNC Bolt 25 100 Slotted Screw Head - 5/16" - 24UNF 25 25 Part Number Bolt Type TGCDS TGCHDS www.ppc-online.com 37 A BELDEN BRAND