HP HLMP-K105-KO0B1 T-1 3/4 (5 mm), t-1 (3 mm), high intensity, double heterojunction algaas red led lamp Datasheet

Agilent
T-13/4 (5 mm), T-1 (3 mm),
High Intensity, Double Heterojunction
AlGaAs Red LED Lamps
Data Sheet
Features
• Exceptional brightness
• Wide viewing angle
• Outstanding material efficiency
HLMP-D101/D105, HLMP-K101/K105
Description
These solid state LED lamps utilize
newly developed double
heterojunction (DH) AlGaAs/GaAs
material technology. This LED
material has outstanding light
output efficiency over a wide range
of drive currents. The color is
deep red at the dominant
wavelength of 637 nanometres.
These lamps may be DC or pulse
driven to achieve desired light
output.
• Low forward voltage
• CMOS/MOS compatible
• TTL compatible
• Deep red color
Applications
• Bright ambient lighting conditions
• Moving message panels
• Portable equipment
• General use
Package Dimensions
3.17 (0.125)
∅ 2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
6.35 (0.250)
5.58 (0.220)
1.14 (0.045)
0.51 (0.020)
SHOULDER
24.1
MIN.
(0.95)
0.65 (0.026) MAX.
0.55 (0.022)
SQ. TYP.
0.40 (0.016)
CATHODE
2.79 (0.110)
2.29 (0.090)
1.52 (0.060)
1.02 (0.040)
CATHODE
A
B
C
Selection Guide
Package Description
T-1 3/4 Red Tinted Diffused
T-1 3/4 Red Untinted Non-diffused
T-1 Red Tinted Diffused
T-1 Red Untinted Non-diffused
Device HLMPD101
D101-J00xx
D101-JK0xx
D105
D105-M00xx
D105-NO0xx
K101
K101-100xx
K101-IJ0xx
K105
K105-J00xx
K105-KL0xx
Luminous Intensity
Iv (mcd) at 20 mA
Min.
Typ.
35.2
70.0
35.2
70.0
35.2
70.0
138.0
240.0
138.0
240.0
200.0
290.0
22.0
45.0
22.0
45.0
22.0
45.0
35.2
65.0
35.2
65.0
56.4
110.0
Max.
–
–
112.8
–
–
580.0
–
–
70.4
–
–
180.4
Note:
1. θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value.
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads, T1
A2: Right Angle Housing, Even Leads, T1
B1: Right Angle Housing, Uneven Leads, T-1 3/4
B2: Right Angle Housing, Even Leads, T-1 3/4
DD, UQ: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Type
01: Tinted, Diffused
05: Untinted, Nondiffused
Color Options
1: AlGaAs Red
Package Options
D: T-1 3/4
K: T-1
2
2θ
θ1/2[1]
Degree
65
65
65
24
24
24
60
60
60
45
45
45
Package
Outline
A
A
A
B
B
B
C
C
C
C
C
C
Absolute Maximum Ratings at TA = 25°C
Parameter
Peak Forward Current[1,2]
Average Forward Current[2]
DC Current[3]
Power Dissipation
Reverse Voltage (IR = 100 µA)
Transient Forward Current (10 µs Pulse)[4]
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Wave Soldering Temperature [1.59 mm (0.063 in.) from body]
Lead Solder Dipping Temperature [1.59 mm (0.063 in.) from body]
Value
300 mA
20 mA
30 mA
87 mW
5V
500 mA
110°C
-20 to +100°C
-55 to +100°C
250°C for 3 seconds
260°C for 5 seconds
Notes:
1. Maximum IPEAK at f = 1 kHz, DF = 6.7%.
2. Refer to Figure 6 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 5.
4. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is
not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Electrical/Optical Characteristics at TA = 25°C
Symbol
Description
VF
Forward Voltage
VR
Reverse Breakdown Voltage
λp
Min.
Typ.
Max.
Unit
Test Condition
1.8
2.2
V
IF = 20 mA
15.0
V
IR = 100 µA
Peak Wavelength
645
nm
Measurement at Peak
λd
Dominant Wavelength
637
nm
Note 1
∆λ1/2
Spectral Line Halfwidth
20
nm
τS
Speed of Response
30
ns
Exponential Time
Constant, e-t/TS
C
Capacitance
30
pF
VF = 0, f = 1 MHz
RθJ-PIN
Thermal Resistance
260[3]
210[4]
290[5]
°C/W
Junction to Cathode Lead
ηV
Luminous Efficacy
80
Im/W
Note 2
5.0
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the color of the device.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = lV/ηV, where IV is the luminous intensity in candelas and ηV is
luminous efficacy in lumens/watt.
3. HLMP-D101.
4. HLMP-D105.
5. HLMP-K101/-K105.
3
Figure 1. Relative intensity vs. wavelength.
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative luminous intensity vs. dc forward current.
Figure 4. Relative efficiency vs. peak forward current.
Figure 5. Maximum forward dc current vs. ambient temperature.
Derating based on TJ MAX. = 110°C.
Figure 6. Maximum tolerable peak current vs. peak duration (IPEAK
MAX. determined from temperature derated IDC MAX.).
4
Figure 7. Relative luminous intensity vs. angular displacement.
HLMP-D101.
Figure 8. Relative luminous intensity vs. angular displacement.
HLMP-K101.
Figure 9. Relative luminous intensity vs. angular displacement.
HLMP-D105.
Figure 10. Relative luminous intensity vs. angular displacement.
HLMP-K105.
5
Intensity Bin Limits
Color
Red
Bin
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Intensity Range (mcd)
Min.
Max.
24.8
39.6
39.6
63.4
63.4
101.5
101.5
162.4
162.4
234.6
234.6
340.0
340.0
540.0
540.0
850.0
850.0
1200.0
1200.0
1700.0
1700.0
2400.0
2400.0
3400.0
3400.0
4900.0
4900.0
7100.0
7100.0
10200.0
10200.0
14800.0
14800.0
21400.0
21400.0
30900.0
Maximum tolerance for each bin limit is ± 18%.
Mechanical Option Matrix
Mechanical Option Code
00
01
02
A1
A2
B1
B2
DD
UQ
Definition
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, crimped leads, minimum increment 1300 pcs (T-1 3/4)/1800 pcs (T-1)
Tape & Reel, straight leads, minimum increment 1300 pcs (T-1 3/4)/1800 pcs (T-1)
Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Ammo Pack, straight leads in 2K increment
Ammo Pack, horizontal leads in 2K increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
6
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5968-1440E
November 12, 2004
5988-2230EN
Similar pages