DYELEC GBJ1502T Single phase 15.0amp glass passivated bridge rectifier Datasheet

GBJ15005T THRU GBJ1510T
SINGLE PHASE 15.0AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
GBJ
· Glass passivated die construction
· Low forward voltage drop
.189(4.8)
.173(4.4)
1.193(30.3)
1.169(29.7)
· High current capability
.215(5.2)
.196(4.8) .800(20.3)
· High surge current capability
· Plastic material-UL flammability 94V-0
+
~
.106(2.7)
.096(2.3)
Mechanical Data
.090(2.3)
.078(2.0)
· Case: Molded plastic, GBJ
· Terminals: Plated Leads Solderable per
.043(1.1)
.035(0.9)
.433(11)
.354(9.0)
·
·
·
·
.150(3.8)
.134(3.4)
MIL-STD-202, Method 208
Polarity: As Marked on Case
Mounting Position: Any
Marking: Type Number
Lead Free: For RoHS / Lead Free Version
~
.787(19.7) .441(11.2)
.425(10.8)
.165(4.2)
.150(3.8)
~
~
.110(2.8)
.094(2.4)
.023(0.6)
.303(7.7)
.287(7.3)
.303(7.7)
.287(7.3)
+
.706(18.0)
.626(16.0)
.184(3.4)
.122(3.1)
-
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
RMS Reverse Voltage
VRMS
Average Rectified Output Current (Note 1)@TC =90 ℃
IF(AV)
GBJ
GBJ
GBJ
GBJ
GBJ
GBJ
GBJ
15005T 1501T 1502T 1504T 1506T 1508T 1510T
UNITS
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
VDC
15.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
300
A
I2t Rating for Fusing (t < 8.3ms)
I 2t
373.5
A2s
VFM
1.0
1.1
V
IR
5.0
500
uA
CJ
60
pF
Between junction and ambient, Without heatsink
RθJA
12
Between junction and case, With heatsink
RθJC
1.5
@IF=7.5A
@IF=15A
Forward Voltage per element
Peak Reverse Current
At Rated DC Blocking Voltage
@TA =25 ℃
@TA =125 ℃
Typical Junction Capacitance per leg
Operating and Storage Temperature Range
TJ,TSTG
℃/W
℃
-55to+150
2
Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad.
version:02
1 of 3
www.dyelec.com
AVERAGE FORWARD RECTIFIED CURRENT (A)
GBU15005T THRU GBU1510T
16.0
12.0
8.0
4.0
0
150
100
50
200
I
(AV),
0
IF, INSTANTANEOUS FORWARD CURRENT (A)
Fig. 1 Output Current Derating Curve
400
350
300
250
200
150
TA = 25°C
Single Half Sine-Wave
Pulse Width = 8.3ms
(JEDEC Method)
0
10
1
0.3
0.03
0.4
TA= 25°C
Pulse Width = 300 µs
0.6
0.8
1.0
1.4
1.2
1.6
100
NUMBER OF CYCLES AT 60 Hz
Fig. 4 Typical Junction Capacitance
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
IFSM, PEAK FORWARD SURGE CURRENT (A)
Fig. 3 Maximum Peak Forward Surge Current (per leg)
50
3
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
TC , CASE TEMPERATURE( ° C)
100
Fig. 2 Typical Forward Characteristics (per leg)
30
10
1.0
T A=25°C
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE
FIG.5 TYPICAL REVERSE CHRACTERISTICS
INVSTANTANEOUS REVERSE CURRENT (µA)
100
Tj=150℃
10
1.0
Tj=25℃
0.1
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK INVERSE VOLTGE (V)
version:02
2 of 3
www.dyelec.com
GBU15005T THRU GBU1510T
Important Notice and Disclaimer
•Reproducing and modifying information of the document is prohibited without permission
from DIYI.
• DIYI reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm the
latest product information and specifications before final design, purchase or use.
•DIYI disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
•DIYI does not assume any and all implied warranties, including warranties of fitness for
particular purpose, non-infringement and merchantability.
Applications shown on the here in document are examples of standard use and
•
operation. Customers are responsible in comprehending the suitable use in particular
applications.
DIYI makes no representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
•The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify DIYI for any damages resulting from such
improper use or sale.
•Since DIYI uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
version:02
3 of 3
www.dyelec.com
Similar pages