MMBT4403L, SMMBT4403L Switching Transistor PNP Silicon Features • S Prefix for Automotive and Other Applications Requiring Unique • www.onsemi.com Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant COLLECTOR 3 1 BASE MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCEO −40 Vdc Collector −Base Voltage VCBO −40 Vdc Emitter −Base Voltage VEBO −5.0 Vdc IC −600 mAdc ICM −900 mAdc Symbol Max Unit 225 1.8 mW mW/°C 556 °C/W Collector Current − Continuous Collector Current − Peak 2 EMITTER 3 SOT−23 (TO−236) CASE 318 STYLE 6 1 2 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR− 5 Board (Note 1) @TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate, (Note 2) @TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature MARKING DIAGRAM PD RqJA PD RqJA TJ, Tstg 300 2.4 mW mW/°C 417 °C/W °C −55 to +150 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. *Transient pulses must not cause the junction temperature to be exceeded. 1. FR− 5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. 2T M G G 1 2T M G = Specific Device Code* = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Specific Device Code, Date Code or overbar orientation and/or location may vary depending upon manufacturing location. This is a representation only and actual devices may not match this drawing exactly. ORDERING INFORMATION Device Package Shipping† MMBT4403LT1G SOT−23 3000 / Tape & Reel (Pb−Free) SMMBT4403LT1G SOT−23 3000 / Tape & Reel (Pb−Free) MMBT4403LT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 1994 October, 2016 − Rev. 13 1 Publication Order Number: MMBT4403LT1/D MMBT4403L, SMMBT4403L ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 3) (IC = −1.0 mAdc, IB = 0) V(BR)CEO −40 − Vdc Collector −Base Breakdown Voltage (IC = −0.1 mAdc, IE = 0) V(BR)CBO −40 − Vdc Emitter −Base Breakdown Voltage (IE = −0.1 mAdc, IC = 0) V(BR)EBO −5.0 − Vdc Base Cutoff Current (VCE = −35 Vdc, VEB = −0.4 Vdc) IBEV − −0.1 mAdc Collector Cutoff Current (VCE = −35 Vdc, VEB = −0.4 Vdc) ICEX − −0.1 mAdc 30 60 100 100 20 − − − 300 − − − − −0.4 −0.75 −0.75 − −0.95 −1.3 ON CHARACTERISTICS DC Current Gain hFE (IC = −0.1 mAdc, VCE = −1.0 Vdc) (IC = −1.0 mAdc, VCE = −1.0 Vdc) (IC = −10 mAdc, VCE = −1.0 Vdc) (IC = −150 mAdc, VCE = −2.0 Vdc) (IC = −500 mAdc, VCE = −2.0 Vdc) (Note 3) (Note 3) Collector −Emitter Saturation Voltage (Note 3) VCE(sat) Vdc (IC = −150 mAdc, IB = −15 mAdc) (IC = −500 mAdc, IB = −50 mAdc) Base −Emitter Saturation Voltage (Note 3) VBE(sat) (IC = −150 mAdc, IB = −15 mAdc) (IC = −500 mAdc, IB = −50 mAdc) Vdc SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = −20 mAdc, VCE = −10 Vdc, f = 100 MHz) fT 200 − MHz Collector−Base Capacitance (VCB = −10 Vdc, IE = 0, f = 1.0 MHz) Ccb − 8.5 pF Emitter−Base Capacitance (VBE = −0.5 Vdc, IC = 0, f = 1.0 MHz) Ceb − 30 pF Input Impedance (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hie 1.5 15 kW Voltage Feedback Ratio (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hre 0.1 8.0 X 10− 4 Small −Signal Current Gain (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hfe 60 500 − Output Admittance (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hoe 1.0 100 mMhos (VCC = −30 Vdc, VEB = −2.0 Vdc, IC = −150 mAdc, IB1 = −15 mAdc) td − 15 tr − 20 (VCC = −30 Vdc, IC = −150 mAdc, IB1 = IB2 = −15 mAdc) ts − 225 tf − 30 SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time ns ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. SWITCHING TIME EQUIVALENT TEST CIRCUIT -30 V -30 V 200 W < 2 ns +2 V +14 V 0 0 1.0 kW -16 V 200 W < 20 ns 1.0 kW CS* < 10 pF -16 V 10 to 100 ms, DUTY CYCLE = 2% 1.0 to 100 ms, DUTY CYCLE = 2% +4.0 V Scope rise time < 4.0 ns *Total shunt capacitance of test jig connectors, and oscilloscope Figure 1. Turn−On Time Figure 2. Turn−Off Time www.onsemi.com 2 CS* < 10 p MMBT4403L, SMMBT4403L TRANSIENT CHARACTERISTICS 25°C 100°C 100 10 7.0 5.0 VCC = 30 V IC/IB = 10 50 3.0 2.0 t, TIME (ns) Q, CHARGE (nC) IC/IB = 10 70 1.0 0.7 0.5 tr @ VCC = 30 V tr @ VCC = 10 V td @ VBE(off) = 2 V td @ VBE(off) = 0 30 20 QT 0.3 10 QA 0.2 7.0 5.0 0.1 10 20 200 30 50 70 100 IC, COLLECTOR CURRENT (mA) 300 500 10 20 30 70 200 100 300 500 300 500 IC, COLLECTOR CURRENT (mA) Figure 3. Charge Data Figure 4. Turn−On Time 200 100 70 IC/IB = 10 VCC = 30 V IC/IB = 10 t s′, STORAGE TIME (ns) 50 t r , RISE TIME (ns) 50 30 20 10 100 IC/IB = 20 70 50 IB1 = IB2 ts′ = ts - 1/8 tf 30 7.0 5.0 20 10 20 30 50 70 200 100 300 500 10 20 30 50 70 200 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 5. Rise Time Figure 6. Storage Time SMALL−SIGNAL CHARACTERISTICS NOISE FIGURE VCE = −10 Vdc, TA = 25°C; Bandwidth = 1.0 Hz 10 10 f = 1 kHz 8 6 4 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 8 IC = 1.0 mA, RS = 430 W IC = 500 mA, RS = 560 W IC = 50 mA, RS = 2.7 kW IC = 100 mA, RS = 1.6 kW 2 IC = 50 mA 100 mA 500 mA 1.0 mA 4 2 RS = OPTIMUM SOURCE RESISTANCE 0 0.01 0.02 0.05 0.1 0.2 6 0 0.5 1.0 2.0 5.0 10 20 50 50 100 100 200 500 1k 2k 5k 10k 20k f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects Figure 8. Source Resistance Effects www.onsemi.com 3 50k MMBT4403L, SMMBT4403L h PARAMETERS VCE = 10 Vdc, f = 1.0 kHz, TA = 25°C This group of graphs illustrates the relationship between hfe and other “h” parameters for this series of transistors. To obtain these curves, a high−gain and a low−gain unit were selected from the MMBT4403LT1 lines, and the same units were used to develop the correspondingly numbered curves on each graph. 100k MMBT4403LT1 UNIT 1 MMBT4403LT1 UNIT 2 hie , INPUT IMPEDANCE (OHMS) 50k 20k 10k 5k 2k 1k 500 200 100 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (mAdc) Figure 9. Input Impedance 500 10 MMBT4403LT1 UNIT 1 MMBT4403LT1 UNIT 2 5.0 2.0 1.0 0.5 0.2 0.1 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 hoe, OUTPUT ADMITTANCE (m mhos) h re , VOLTAGE FEEDBACK RATIO (X 10 -4 ) 20 100 50 20 5.0 2.0 1.0 0.1 5.0 7.0 10 MMBT4403LT1 UNIT 1 MMBT4403LT1 UNIT 2 10 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc) Figure 10. Voltage Feedback Ratio Figure 11. Output Admittance www.onsemi.com 4 5.0 7.0 10 MMBT4403L, SMMBT4403L STATIC CHARACTERISTICS 450 VCE = 5.0 V VCE = 2.0 V VCE = 1.0 V h FE , DC CURRENT GAIN 400 350 TJ = 150°C 300 250 25°C 200 150 100 -55°C 50 0.001 0.0001 0.01 IC, COLLECTOR CURRENT (A) 0.1 1 Figure 12. DC Current Gain VCE, COLLECTOR-EMITTER VOLTAGE (V) 1.2 IC = 1.0 mA 10 mA 100 mA 500 mA 1.0 0.8 0.6 0.4 0.2 0 0.001 0.01 0.1 10 1 100 Ib, BASE CURRENT (mA) 0.35 0.5 IC/IB = 10 0.30 0 COEFFICIENT (mV/ °C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) Figure 13. Collector Saturation Region 0.25 150°C 0.20 25°C 0.15 0.10 qVC for VCE(sat) 0.5 1.0 1.5 -55°C qVS for VBE 2.0 0.05 0 0.0001 0.1 0.01 0.001 IC, COLLECTOR CURRENT (A) 2.5 0.1 0.2 1 Figure 14. Collector−Emitter Saturation Voltage vs. Collector Current 0.5 50 100 200 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) Figure 15. Temperature Coefficients www.onsemi.com 5 500 MMBT4403L, SMMBT4403L STATIC CHARACTERISTICS 1.0 IC/IB = 10 VBE(on), BASE−EMITTER TURN ON VOLTAGE (V) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) 1.1 1.0 0.9 −55°C 0.8 0.7 25°C 0.6 0.5 150°C 0.4 VCE = 2.0 V 0.9 −55°C 0.8 0.7 25°C 0.6 0.5 0.4 150°C 0.3 0.2 0.3 0.0001 0.001 0.01 0.1 0.0001 1 IC, COLLECTOR CURRENT (A) 1 0.1 Figure 17. Base−Emitter Turn On Voltage vs. Collector Current 15 Cobo, OUTPUT CAPACITANCE (pF) 40 Cibo, INPUT CAPACITANCE (pF) 0.01 IC, COLLECTOR CURRENT (A) Figure 16. Base−Emitter Saturation Voltage vs. Collector Current 35 30 25 20 15 13 11 9 7 5 3 10 0 1 2 3 4 0 6 5 5 Veb, EMITTER BASE VOLTAGE (V) 1s 10 ms 1 ms 100 ms 100 Thermal Limit 10 1 0.1 1 15 20 25 30 40 35 Figure 19. Output Capacitance vs. Collector Base Voltage fT, CURRENT−GAIN−BANDWIDTH (MHz) 1000 10 Vcb, COLLECTOR BASE VOLTAGE (V) Figure 18. Input Capacitance vs. Emitter Base Voltage IC, COLLECTOR CURRENT (mA) 0.001 10 100 1000 VCE = 1.0 V TA = 25°C 100 10 0.1 1 10 100 1000 VCE, COLLECTOR EMITTER VOLTAGE (V) IC, COLLECTOR CURRENT (mA) Figure 20. Safe Operating Area Figure 21. Current−Gain−Bandwidth Product www.onsemi.com 6 MMBT4403L, SMMBT4403L PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0° INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10° STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT4403LT1/D