Surface Mount Monolithic Amplifier 50Ω LEE-9+ DC to 8 GHz The Big Deal • Low Gain • Excellent Gain flatness, ±0.5 dB up to 8 GHz • Broadband matched 3mm x 3mm MCLP package Product Overview LEE-9+ (RoHS compliant) is wideband current driven amplifier fabricated using HBT technology. In addition, the LEE-9+, has good input and output return loss over a broad frequency range without the need for external matching components. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a 3mm x 3mm x 0.89mm MCLP package for very good thermal performance. Key Features Feature Advantages Broadband, DC* to 8 GHz (* Low frequency cut off determined by external coupling capacitors) A single amplifier covering DC* to C band. • Reduced component inventory • Ideal for wideband applications such as instrumentation and military Low gain: 8.5 dB typ. at 0.1 GHz and 7.7 dB at 8 GHz Ideal for increasing the gain of amplifier chain by low value. Typically small gain change may need two components; an amplifier and an attenutaor. Use of LEE-9+ reduces component count. Outstanding Gain Flatness: ±0.4 dB No need for gain flatness compensation over 8 GHz band to realize published gain flatness. Wideband matched Input return loss: 17-29 dB typ. Output return loss: 12-34 dB typ. MCLP Package No external matching required to realize published return loss. Low inductance, repeatable transitions, excellent thermal pad. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 4 Surface Mount Monolithic Amplifier DC-8 GHz Product Features • DC-8 GHz • Gain, 8.4 dB typ. at 2 GHz • Outstanding gain flatness, ±0.5 dB typ. • Output power, 13.9 dBm typ. at 2 GHz • Internally Matched to 50 Ohms • Aqueous washable • Protected by US Patent 6,943,629 LEE-9+ CASE STYLE: FG873 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Typical Applications • Cellular • PCS • Communication receivers & transmitters • Satellite communication, military General Description LEE-9+ (RoHS compliant) is a wideband amplifier offering medium dynamic range. It has repeatable performance from lot to lot. It is enclosed in a 3X3mm MCLP molded plastic package. INDEX ON TOP simplified schematic and pin description RF-OUT and DC-IN RF IN (1) RF IN GND(4) GND (2) BOTTOM VIEW GROUND Function Pin Number RF OUT and DC IN (3) Description 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”. GND 2,4 RF IN Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M151107 LEE-9+ RS/CP/AM 150813 Page 2 of 4 LEE-9+ Monolithic MMIC Amplifier Electrical Specifications1 at 25°C and 50mA, unless noted Parameter Condition (GHz) Frequency Range2 Min. Typ. DC 0.1 1 2 4 5 8 0.1 1 2 4 5 8 0.1 1 2 4 5 8 0.1 1 2 4 5 8 0.1 1 2 4 5 8 0.1 1 2 4 5 8 Gain Input Return Loss Output Return Loss Output IP3 Output Power @ 1 dB compression Noise Figure Recommended Device Operating Current (Id) Device Operating Voltage (Vd) Device Voltage Variation vs. Temperature at 50 mA Device Voltage Variation vs. Current at 25°C Thermal Resistance, junction-to-case — — 7.6 — — — — — 12.0 — — — 3.6 8.5 8.5 8.4 8.2 8.0 7.7 24.0 23.8 22.6 20.2 23.1 23.5 33.0 29.7 26.1 22.0 20.9 13.3 31.3 30.5 29.7 25.4 23.4 19.7 14.1 14.0 13.9 12.4 11.9 7.9 5.1 5.1 5.3 5.3 5.2 5.3 50 4.0 Max. Units 8 GHz — — 9.3 — — — dB dB dB dBm — — — — — — dBm dB 4.4 mA V -2.7 mV/°C 17.3 138 mV/mA °C/W 1. Measured on Mini-Circuits test board TB-154 2. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings3 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current Input Power 4 74 mA 26 dBm (5 min max.) 15 dBm (continuous) 3. Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 4. For continuous operation 15 dBm max. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 4 LEE-9+ Monolithic MMIC Amplifier Characterization Test Circuit Supply Curre nt (Id) 3 1 RF-IN 2,4 DUT BLK-18+ TB-154 Vd RF-OUT Bias- Tee ZX85-12G-S+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-154) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, -5 dBm/tone at output. Recommended Application Circuit R bias (R equired) V cc Index C bypas s C block IN 4 Ibias R F C (Optional) 3 Vd 1 2 OUT C block R BIAS Test Board includes case, connectors, and components (in bold) soldered to PCB Product Marking MCL 9 XXXX Body (Black) Vcc “1%” Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 16 17 18 19 20 61.9 80.6 100 121 140 165 182 200 221 237 261 274 301 316 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 4 LEE-9+ Monolithic MMIC Amplifier Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Data Table Performance Data Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style FG873, MCLP Plastic package, exposed paddle, lead finish: tin-silver Tape & Reel F68 over nickel 7” Reels with 20, 50, 100, 200, 500, 1K devices Suggested Layout for PCB Design 98-PL-252 Evaluation Board TB-413-9+ Environmental Ratings ENV08T1 ESD Rating Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (25V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 4