TI1 LM7905CT/NOPB Lm79xx series 3-terminal negative regulator Datasheet

LM7905, LM7912, LM7915
www.ti.com
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
LM79XX Series 3-Terminal Negative Regulators
Check for Samples: LM7905, LM7912, LM7915
FEATURES
1
•
2
•
•
•
Thermal, Short Circuit and Safe Area
Protection
High Ripple Rejection
1.5A Output Current
4% Tolerance on Preset Output Voltage
space
DESCRIPTION
The LM79XX series of 3-terminal regulators is
available with fixed output voltages of −5V, −12V, and
−15V. These devices need only one external
component—a compensation capacitor at the output.
The LM79XX series is packaged in the TO-220 power
package and is capable of supplying 1.5A of output
current.
Connection Diagram
Figure 1. TO-220 Package
Front View
See Package Number NDE0003B
Typical Applications
These regulators employ internal current limiting safe
area protection and thermal shutdown for protection
against virtually all overload conditions.
Low ground pin current of the LM79XX series allows
output voltage to be easily boosted above the preset
value with a resistor divider. The low quiescent
current drain of these devices with a specified
maximum change with line and load ensures good
regulation in the voltage boosted mode.
For applications requiring other voltages, see LM137
datasheet.
*Required if regulator is separated from
filter capacitor by more than 3″. For value
given, capacitor must be solid tantalum.
25μF aluminum electrolytic may be
substituted.
†Required for stability. For value given,
capacitor must be solid tantalum. 25μF
aluminum electrolytic may be substituted.
Values given may be increased without
limit.
For output capacitance in excess of 100μF,
a high current diode from input to output
(1N4001, etc.) will protect the regulator
from momentary input shorts.
Figure 2. Fixed Regulator
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated
LM7905, LM7912, LM7915
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS (1)
Input Voltage
(Vo = −5V)
−25V
(Vo = −12V and −15V)
−35V
Input-Output Differential
(Vo = −5V)
25V
(Vo = −12V and −15V)
Power Dissipation
30V
(2)
Internally Limited
Operating Junction Temperature Range
0°C to +125°C
−65°C to +150°C
Storage Temperature Range
Lead Temperature (Soldering, 10 sec.)
(1)
(2)
230°C
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but do not ensure Specific Performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics.
Refer to DESIGN CONSIDERATIONS for details.
ELECTRICAL CHARACTERISTICS
Conditions unless otherwise noted: IOUT = 500mA, CIN = 2.2μF, COUT = 1μF, 0°C ≤ TJ ≤ +125°C, Power Dissipation ≤ 1.5W.
Part Number
LM7905C
Output Voltage
−5V
−10V
Input Voltage (unless otherwise specified)
Symbol
VO
Parameter
Output Voltage
Conditions
Min
Typ
Max
TJ = 25°C
−4.8
−5.0
−5.2
V
5mA ≤ IOUT ≤ 1A,
−4.75
−5.25
V
50
mV
15
mV
P ≤ 15W
ΔVO
Line Regulation
Units
TJ = 25°C,
(−20 ≤ VIN ≤ −7)
(1)
8
V
(−25 ≤ VIN ≤ −7)
2
V
(−12 ≤ VIN ≤ −8)
ΔVO
Load Regulation
TJ = 25°C,
5mA ≤ IOUT ≤ 1.5A
15
100
mV
250mA ≤ IOUT ≤ 750mA
5
50
mV
1
2
mA
0.5
mA
0.5
mA
IQ
Quiescent Current
TJ = 25°C
ΔIQ
Quiescent Current
With Line
(−25 ≤ VIN ≤ −7)
Change
With Load, 5mA ≤ IOUT ≤ 1A
Vn
IOMAX
V
(1)
Output Noise Voltage
TA = 25°C, 10Hz ≤ f ≤ 100Hz
Ripple Rejection
f = 120Hz
54
V
125
μV
66
dB
(−18 ≤ VIN ≤ −8)
V
V
Dropout Voltage
TJ = 25°C, IOUT = 1A
1.1
Peak Output Current
TJ = 25°C
2.2
A
Average Temperature
IOUT = 5mA,
0.4
mV/°C
Coefficient of
0 C ≤ TJ ≤ 100°C
Output Voltage
(1)
2
Regulation is measured at a constant junction temperature by pulse testing with a low duty cycle. Changes in output voltage due to
heating effects must be taken into account.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
LM7905, LM7912, LM7915
www.ti.com
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
ELECTRICAL CHARACTERISTICS
Conditions unless otherwise noted: IOUT = 500mA, CIN = 2.2μF, COUT = 1μF, 0°C ≤ TJ ≤ +125°C, Power Dissipation ≤ 1.5W.
Part Number
LM7912C
LM7915C
Output Voltage
−12V
−15V
Input Voltage (unless otherwise specified)
−19V
Symbol
VO
Parameter
Output Voltage
Conditions
ΔVO
Line Regulation
Load Regulation
Typ
Max
Min
Typ
Max
TJ = 25°C
−11.5
−12.0
−12.5
−14.4
−15.0
−15.6
V
5mA ≤ IOUT ≤ 1A,
−11.4
−12.6
−14.25
−15.75
V
TJ = 25°C,
(−27 ≤ VIN ≤ −14.5)
(−30 ≤ VIN ≤ −17.5)
V
5
5
mV
(1)
100
(−30 ≤ VIN ≤ −14.5)
(−30 ≤ VIN≤ −17.5)
V
3
3
mV
30
50
(−26 ≤ VIN ≤−20)
V
5mA ≤ IOUT ≤ 1.5A
15
200
15
200
mV
250mA ≤ IOUT ≤ 750mA
5
75
5
75
mV
1.5
3
1.5
3
mA
0.5
mA
TJ = 25°C,
Quiescent Current
TJ = 25°C
ΔIQ
Quiescent Current
With Line
(1)
0.5
(−30 ≤ VIN ≤ −14.5)
Change
With Load, 5mA ≤ IOUT ≤ 1A
IOMAX
80
(−22 ≤ VIN ≤ −16)
IQ
Vn
−23V
Min
P ≤ 15W
ΔVO
Units
Output Noise Voltage
TA = 25°C, 10Hz ≤ f ≤ 100Hz
Ripple Rejection
f = 120 Hz
(−30 ≤VIN ≤ −17.5)
0.5
0.5
V
mA
375
μV
70
dB
(−25 ≤ VIN ≤ −15)
(−30 ≤ VIN≤ −17.5)
V
V
300
54
70
54
Dropout Voltage
TJ = 25°C, IOUT = 1A
1.1
1.1
Peak Output Current
TJ = 25°C
2.2
2.2
A
Average Temperature
IOUT = 5mA,
−0.8
−1.0
mV/°C
Coefficient of
0 C ≤ TJ ≤ 100°C
Output Voltage
(1)
Regulation is measured at a constant junction temperature by pulse testing with a low duty cycle. Changes in output voltage due to
heating effects must be taken into account.
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
Submit Documentation Feedback
3
LM7905, LM7912, LM7915
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
www.ti.com
DESIGN CONSIDERATIONS
The LM79XX fixed voltage regulator series has thermal overload protection from excessive power dissipation,
internal short circuit protection which limits the circuit's maximum current, and output transistor safe-area
compensation for reducing the output current as the voltage across the pass transistor is increased.
Although the internal power dissipation is limited, the junction temperature must be kept below the maximum
specified temperature (125°C) in order to meet data sheet specifications. To calculate the maximum junction
temperature or heat sink required, the following thermal resistance values should be used:
Package
TO-220
Typ
Max
Typ
θJC
θJC
θJA
Max
θJA
°C/W
°C/W
°C/W
°C/W
3.0
5.0
60
40
(1)
Solving for TJ:
TJ = TA + PD (θJC + θCA)
or
= TA + PDθJA (without heat sink)
where
•
•
•
•
•
•
•
•
TJ = Junction Temperature
TA = Ambient Temperature
PD = Power Dissipation
θJA = Junction-to-Ambient Thermal Resistance
θJC = Junction-to-Case Thermal Resistance
θCA = Case-to-Ambient Thermal Resistance
θCS = Case-to-Heat Sink Thermal Resistance
θSA = Heat Sink-to-Ambient Thermal Resistance
Typical Applications
Bypass capacitors are necessary for stable operation of the LM79XX series of regulators over the input voltage
and output current ranges. Output bypass capacitors will improve the transient response by the regulator.
The bypass capacitors, (2.2μF on the input, 1.0μF on the output) should be ceramic or solid tantalum which have
good high frequency characteristics. If aluminum electrolytics are used, their values should be 10μF or larger.
The bypass capacitors should be mounted with the shortest leads, and if possible, directly across the regulator
terminals.
4
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
LM7905, LM7912, LM7915
www.ti.com
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
Load and line regulation < 0.01% temperature stability ≤ 0.2%
†Determine Zener current
††Solid tantalum
*Select resistors to set output voltage. 2 ppm/°C tracking suggested
Figure 3. High Stability 1 Amp Regulator
Figure 4. Current Source
*Lamp brightness increase until iI= iQ (≈ 1 mA) + 5V/R1.
†Necessary only if raw supply filter capacitor is more that 2″ from LM7905CT
Figure 5. Light Controller Using Silicon Photo Cell
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
Submit Documentation Feedback
5
LM7905, LM7912, LM7915
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
www.ti.com
*Lamp brightness increases until ii = 5V/R1 (Ii can be set as low as 1 μA)
†Necessary only if raw supply filter capacitor is more that 2″ from LM7905
Figure 6. High-Sensitivity Light Controller
*Improves transient response and ripple rejection. Do not increase beyond 50 μF.
Select R2 as follows:
LM7905CT
300Ω
LM7912CT
750Ω
LM7915CT
1k
Figure 7. Variable Output
6
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
LM7905, LM7912, LM7915
www.ti.com
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
(-15)
(+15)
Load Regulation at ΔIL = 1A
40mV
2mV
Output Ripple, CIN = 3000µF, IL = 1A
100 µVms
100 µVms
Temperature Stability
50mV
50mV
Output Noise 10Hz ≤ f ≤ 10kHz
150 µVms
150 µVms
*Resistor tolerance of R4 and R5 determine matching of (+) and (−) outputs.
**Necessary only if raw supply filter capacitors are more than 3″ from regulators.
Figure 8. ±15V, 1 Amp Tracking Regulators
Figure 9. Dual Trimmed Supply
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
Submit Documentation Feedback
7
LM7905, LM7912, LM7915
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
www.ti.com
Schematic Diagrams
Figure 10. −5V
Figure 11. −12V and −15V
8
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
LM7905, LM7912, LM7915
www.ti.com
SNOSBQ7C – JUNE 1999 – REVISED MAY 2013
REVISION HISTORY
Changes from Revision B (May 2013) to Revision C
•
Page
Changed layout of National Data Sheet to TI format. ........................................................................................................... 8
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM7905 LM7912 LM7915
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM7905CT
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LM7905CT
LM7905CT/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LM7905CT
LM7912CT
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LM7912CT
LM7912CT/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LM7912CT
LM7915CT
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LM7915CT
LM7915CT/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LM7915CT
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2013
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
NDE0003B
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages