GOOD-ARK FF1 Surface mount glass passivated fast recovery rectifier reverse voltage 50~1000v forward current 1a Datasheet

FF1 thru FF7
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
•
•
•
•
•
•
•
•
Glass passivated Fast Recovery rectifiers
Very low profile - typical height of 1.0 mm
Low forward voltage drop
L
Low
lleakage
k
currentt
Moisture sensitivity: level 1, per J-STD-020
AEC-Q101 qualified
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single half sinewave superimposed on rated load
Operating junction and storage temperature range
Electrical Characteristics
Test Conditions
Maximum instantaneous forward
lt
Maximum DC reverse current at
rated DC blocking voltage
1A
TA=25℃
TA=125℃
IF=0.5A,I
=0 5A IR=1.0A,
=1 0A
Maximum reverse recovery time
Irr=0.25A
1)
Typical thermal resistance
FF1
FF2
FF3
FF4
FF5
FF6
FF7
Unit
VRRM
VRMS
VDC
IF(AV)
50
35
50
100
70
100
200
140
200
400
280
400
1.0
600
420
600
800
560
800
1000
700
1000
V
V
V
A
IFSM
30
A
TJ, TSTG
- 55 to + 150
°C
(TA = 25 °C unless otherwise noted)
Parameter
Typical junction capacitance
Symbol
4.0 V, 1 MHz
juntion to ambient
juntion to case
juntion to mount
Symbol
FF1
FF2
FF3
VF
FF4
FF5
FF6
FF7
1.3
Volts
5
IR
µA
50
trr
150
250
CJ
8.2
RθJA
RθJC
RθJM
76
Unit
500
nS
pF
42
℃/W
7
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.02-Rev.A
FF1 thru FF7
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non‐Repetitive Peak
Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.02-Rev.A
FF1 thru FF7
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
in inches (millimeters)
Unit: mm
DIM
Unit: inch
MIN
MAX
MIN
MAX
A
0.9
1.08
0.035
0.043
A1
0
0.1
0.000
0.004
B
0.85
1.05
0.033
0.041
C
0.1
0.25
0.004
0.010
D
1.7
2
0.067
0.079
E
2.9
3.1
0.114
0.122
L
0.43
0.83
0.017
0.033
HE
3.5
3.9
0.138
0.154
Soldering footprint
Packing Information
Packing
gq
quantities:
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.02-Rev.A
FF1 thru FF7
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark
product best suited to the customer’s application; they do not convey any license under any intellectual property
rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any thirdparty ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit
application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms
represents information on products at the time of publication of these materials, and are subject to change by
Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized
Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed
herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from
these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark
Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
( p
g
)
When using any or all of the information contained in these materials, including product data, diagrams, charts,
programs, and algorithms, Please be sure to evaluate all information as a total system before making a final
decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in
whole
h l or iin partt th
these materials.
t i l
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these
materials or the products contained herein.
www.goodark.com
4/4
2014.02-Rev.A
Similar pages