PRODUCT DATASHEET Mirella series last update 17/8/2017 DETAILS Product Number F15558_MIRELLA-G2-S Family Mirella Type Reflector Color metal Diameter 49,9 mm Height 24,8 mm Style round Optic Material PC Holder Material Fastening Status production ready ROHS Compliant Yes Date Updated 17/08/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO10 19 deg Spot 91 % 4.500 LEDiL: F15616_HEKLA-SOCKET-F Vesta TW 9mm (12W) 18 deg Spot 85 % 3.800 Bender Wirth: 490 Typ L8 VERO13 sim: 25 Spot sim: 82 % sim: 2.300 LEDiL: C16142_HEKLA-SOCKET-K CLL02x/CLU02x (LES10) 15 deg Spot 88 % 6.600 LEDiL: F15255_HEKLA-SOCKET-C CLU700/701 13 deg Spot 91 % 8.500 LEDiL: F15255_HEKLA-SOCKET-C CLC020 Series (Dim-To-Warm) 21 deg Spot 81 % 2.600 LEDiL: C16142_HEKLA-SOCKET-K CLU710/711 19 deg Spot 86 % 3.400 LEDiL: F15859_HEKLA-SOCKET-I CXA/B 15xx 18 deg Spot 93 % 4.800 LEDiL: F15256_HEKLA-SOCKET-D CXA/B 13xx 12 deg Spot 93 % 9.200 LEDiL: F15956_HEKLA-SOCKET-J LUXEON CoB 1202/1203 19 deg Spot 90 % 4.300 LEDiL: F15858_HEKLA-SOCKET-H COB T-Type sim: 14 Spot sim: 88 % sim: 7.360 LEDiL: F15848_HEKLA-SOCKET-G Soleriq S9 21 deg Spot 91 % 3.800 LEDiL: F15255_HEKLA-SOCKET-C LC020C 18 deg Spot 90 % 4.400 LEDiL: F15848_HEKLA-SOCKET-G SLE G6 LES10 sim: 18 Spot sim: 90 % sim: 4.600 LEDiL: F15255_HEKLA-SOCKET-C February 5th 2018 3:12 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.