DB Lectro BTP-53XXCH-XX-XX Brilux 1w light source Datasheet

BriLux 1W Light Source
BTP-53XXCH-XX-XX
Package Dimension
Features
Highest Lumen Per Watt
Long Operational Life
More Energy Efficient
IC Compatible
Low DC Voltage
Superior ESD Protection
Smallest Footprint
Applications
Accent Lighting
Automotive Exterior/Interior Light
High Power Back Light
Reading Light
Marine/Miner’s Lighting
Portable Lighting
0.01
inch
Tolerance:
±
mm
Unit: ±
0.25
Optical Characteristics at Ta=25ºC
PART NUMBER
LED CHIP
MATERIAL
Lens
Color
Wavelength/CCT
Luminous
VIEW
ANGLE
Flux
@350mA(lm) 2θ1/2
Range (nm/K)
Drive
Voltage
Min/Max
Typ.
Typ.
(deg)
BTP-53NRCH-XX-15
AlInGaP
Water Clear
620~635
2.85V
15 lm
60
BTP-53AMCH-XX-15
AlInGaP
Water Clear
600~620
2.85V
15 lm
60
BTP-53YECH-XX-15
AlInGaP
Water Clear
585~595
2.85V
15 lm
60
BTP-53DBCH-XX-05
AlInGaN
Water Clear
450~460
3.40V
5 lm
60
BTP-53BLCH-XX-06
AlInGaN
Water Clear
460~475
3.40V
6 lm
60
BTP-53GBCH-XX-08
AlInGaN
Water Clear
475~485
3.40V
8 lm
60
BTP-53BGCH-XX-15
AlInGaN
Water Clear
495~510
3.40V
15 lm
60
BTP-53GMCH-XX-20
AlInGaN
Water Clear
510~520
3.40V
20 lm
60
BTP-53PGCH-XX-25
AlInGaN
Water Clear
520~530
3.40V
25 lm
60
BTP-53WHCH-XX-20
AlInGaN
Water Clear
5000K~8000K
3.40V
20 lm
60
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCH-XX-XX
Absolute Maximum Ratings at Ta=25ºC
Parameter
White/Green/Cyan/Blue
Red/Amber/Yellow
1000
450
350
150
Peak Pulsed Forward Current (mA)
500
300
Average Forward Current (mA)
350
150
Reverse Voltage (V)
5
5
Reverse Current (uA)
10
10
120
120
100
100
Storage Temperature (°C)
-40 to +100
-40 to +100
Soldering Temperature (°C)[4]
260 for 5 seconds max
260 for 5 seconds max
Power Dissipation (mW)
[1]
DC Forward Current (mA)
LED Junction Temperature (°C)
Al-PCB Temperature (°C)
[3]
Application Notes:
1.
Proper forward current must be observed to maintain the junction temperature below maximum
rating
2.
Although all products listed are class one ESD protection (+/- 1KV by HBM mode), care must be
fully taken when handling products
3.
Measured at back of aluminium PCB without additional heat sink. We recommend mounting
BriLux light source directly to heat sink with fasteners for best performance.
4.
Measured at contact terminals.
5.
Specification is subjected to change without notice.
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCH-XX-XX
Typical Electro-Optical Characteristics Curves at Ta=25ºC
(Red/Yellow/Blue/Green)
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCH-XX-XX
Typical Electro-Optical Characteristics Curves at Ta=25ºC (White)
White BriLux
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
Similar pages