Vishay NTCC200E4123FT Leadless ntc thermistor die suitable Datasheet

NTCC200E4, NTCC300E4
www.vishay.com
Vishay BCcomponents
Leadless NTC Thermistor Die Suitable for Wire Bonding
FEATURES
• Flat chip contacted top and bottom
(gold: NTCC300E4 series or silver: NTCC200E4
series)
• Green thermistor - does not use RoHS
exemptions
• Wide temperature range from -55 °C to +175 °C
• Highly resistant to thermal shocks
• Ideal for wire bonding (aluminum or gold
depending on metalization type)
• Resistance to leaching
• Delivered on blister tape
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
4.7K to 20K

± 1; ± 2; ± 3; ± 5
%
3435 to 3865
K
±1
%
Operating temperature range
-55 to +175
°C
Response time (63.2 %)
25 °C to 85 °C still air (for info)
3
s
Dissipation factor  in still air
(for info, non-mounted die)
3
mW
Maximum power dissipation
50
mW
Weight
3
mg
Resistance value at 25 °C
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
APPLICATIONS
• High temperature sensing, control and compensation.
E.g. IGBT modules (inverters in EV and HEV vehicles)
• IC and semiconductor protecting
• DC/AC power inverters and HIC overheat protecting
DESIGN-IN SUPPORT
For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/
MARKING
The thermistors have no marking and have electrode
termination design without orientation.
MOUNTING
The thermistors are primarily intended for wire bonding. The
parameters of the assembly process should be chosen in
accordance with the lead-wire material.
The mounting process should be in compliance with the
following guidelines and recommendations:
Die bonding:
• Gold electrode: silver epoxy gluing.
• Silver electrode: (vacuum) reflow soldering - silver epoxy
gluing - nano silver sintering.
Cleaning:
• Detergent spraying.
• Ultrasonic or formic acid vapor cleaning is not
recommended.
Wire bonding:
• The gold electrode has been tested for gold wire bonding
with a wire diameter of max. 32 μm.
• The silver electrode has been tested for aluminum wire
bonding with a wire diameter of max. 300 μm.
Encapsulation:
• In order to preserve the characteristics of the bonded die
at long term an encapsulation is mandatory.
• The encapsulation is defined by the user. Silicon and
epoxy encapsulations have been tested. For
recommendations on compatible encapsulants contact
Vishay.
ELECTRICAL DATA AND ORDERING INFORMATION
R25
()
R25-TOL.
(± %)
B25/85
(K)
B25/85-TOL.
(± %)
DESCRIPTION
SAP MATERIAL AND
ORDERING NUMBER (1)
4700
1, 2, 3, 5
3435
1
Bare die with top / bottom silver terminations
NTCC200E4472*T
12 000
1, 2, 3, 5
3740
1
Bare die with top / bottom silver terminations
NTCC200E4123*T
20 000
1, 2, 3, 5
3865
1
Bare die with top / bottom silver terminations
NTCC200E4203*T
4700
1, 2, 3, 5
3435
1
Bare die with top / bottom gold terminations
NTCC300E4472*T
12 000
1, 2, 3, 5
3740
1
Bare die with top / bottom gold terminations
NTCC300E4123*T
20 000
1, 2, 3, 5
3865
1
Bare die with top / bottom gold terminations
NTCC300E4203*T
Note
(1) In order to define R -tolerance, replace * in SAP part number by F (± 1 %), G (± 2 %), H (± 3 %), or J (± 5 %)
25
Revision: 20-Mar-17
Document Number: 29153
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCC200E4, NTCC300E4
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
W
T
Wire bondable surface
PARAMETER
VALUE
W
2 ± 0.1
T
0.7 max.
Note
• Non-dimensioned details do not affect the performance of the thermistors
PACKAGING
The components are delivered on 8mm embossed blister tape (0.3 mm conductive PS) conforming to EIA-481 and IEC 60286-3,
with 2000 parts per reel.
Revision: 20-Mar-17
PARAMETER
VALUE
A0
2.2 ± 0.1
B0
2.2 ± 0.1
K0
1.0 ± 0.1
W
8 ± 0.3
F
3.5 ± 0.05
E1
1.75 ± 0.1
P0
4.0 ± 0.1
P2
2.0 ± 0.05
D0
1.5 ± 0.1
D1
1.0 ± 0.1
T
0.35 max.
T2
0.50 max.
Document Number: 29153
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages