HP HLMA-QJ00 Subminiature high performance alingap led lamp Datasheet

Subminiature High Performance
AlInGaP LED Lamps
Technical Data
Features
• Subminiature Flat Top
Package
Ideal for Backlighting and Light
Piping Applications
• Subminiature Dome Package
Nondiffused Dome for High
Brightness
• Wide Range of Drive
Currents
• Colors: 590 nm Amber,
605 nm Orange, 615 nm
Reddish-Orange, 626 nm
Red, and 635 nm Red
• Ideal for Space Limited
Applications
• Axial Leads
• Available with Lead
Configurations for Surface
Mount and Through Hole PC
Board Mounting
Description
Flat Top Package
The HLMX-PXXX flat top lamps
use an untinted, nondiffused,
truncated lens to provide a wide
radiation pattern that is necessary for use in backlighting
applications. The flat top lamps
are also ideal for use as emitters
in light pipe applications.
SunPower Series
HLMA-PF00 HLMT-PG00
HLMA-PG00 HLMT-PH00
HLMA-PH00 HLMT-PL00
HLMA-PL00 HLMT-QG00
HLMA-QF00 HLMT-QH00
HLMA-QG00 HLMT-QL00
HLMA-QH00
HLMA-QL00
Dome Packages
The HLMX-QXXX dome lamps
use an untinted, nondiffused lens
to provide a high luminous
intensity within a narrow
radiation pattern.
Lead Configurations
All of these devices are made by
encapsulating LED chips on axial
lead frames to form molded
epoxy subminiature lamp
packages. A variety of package
configuration options is available.
These include special surface
mount lead configurations, gull
wing, yoke lead, or Z-bend. Right
angle lead bends at 2.54 mm
(0.100 inch) and 5.08 mm (0.200
inch) center spacing are available
for through hole mounting. For
more information refer to
Standard SMT and Through Hole
Lead Bend Options for
Subminiature LED Lamps data
sheet.
Technology
These subminiature solid state
lamps utilize one of the two newly
developed aluminum indium
gallium phosphide (AlInGaP)
LED technologies, either the
absorbing substrate carrier
technology (AS = HLMADevices) or the transparent
substrate carrier technology
(TS = HLMT-Devices). The TS
HLMT-Devices are especially
effective in very bright ambient
lighting conditions. The colors
590 nm amber, 605 nm orange,
615 nm reddish-orange, 626 nm
red, and 635 nm red are available
with viewing angles of 15° for the
domed devices and 125° for the
flat top devices.
2
Device Selection Guide
λd (nm)
Typ. Iv (mcd)
Package
Description
Viewing
Angle 2θ1/2
Package
Outline
HLMA-QL00
590
500
Domed,
15°
B
HLMT-QL00
590
1000
Nondiffused,
HLMA-QJ00
605
500
Untinted
HLMA-QH00
615
500
HLMT-QH00
615
800
HLMA-QG00
626
500
HLMT-QG00
626
1000
HLMA-QF00
635
500
HLMA-PL00
590
75
Flat Top,
125°
A
HLMT-PL00
590
150
Nondiffused,
HLMA-PJ00
605
75
Untinted
HLMA-PH00
615
75
HLMT-PH00
615
120
HLMA-PG00
626
75
HLMT-PG00
626
150
HLMA-PF00
635
75
Part Number
3
Part Numbering System
HLMx - x x 00 - x x x xx
Packaging Option
00: Straight Leads, Bulk Packaging, Quantity of 500 parts
11: Gull Wing Bend, Tape & Reel – 7" Reel
12: Gull Wing Bend, Bulk
14: Gull Wing Bend, Tape & Reel – 13" Reel
21: Yoke Bend, Tape and Reel – 7" Reel
22: Yoke Bend, Bulk
24: Yoke Bend, Tape and Reel – 13" Reel
31: Z-Bend, Tape and Reel – 7" Reel
32: Z-Bend, Bulk
34: Z-Bend, Tape and Reel – 13" Reel
Color Bin Selection
0: Full Color Bin Distribution
B: Color Bins 3 & 4
K: Color Bins 2, 3 & 4
R: Color Bins 2 & 4
W: Color Bins 2, 4, 6 & 7
X: Color Bins 4, 6 & 7
Maximum Iv Bin Options
Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Options
L: Amber 590 nm
J: Orange 605 nm
H: Reddish Orange 615 nm
G: Red 626 nm
F: Red 635 nm
Package Options
Q: Dome
P: Flat Top
Dice Options
A: AS AlInGaP
T: TS AlInGaP
4
Package Dimensions
(A) Flat Top Lamps
(B) Domed Lamps, Diffused and Nondiffused
0.50 (0.020) REF.
1.40 (0.055)
1.65 (0.065)
11.68 (0.460)
10.67 (0.420)
BOTH SIDES
11.68 (0.460)
10.67 (0.420)
BOTH SIDES
CATHODE
0.46 (0.018)
0.56 (0.022)
1.65 (0.065)
DIA.
1.91 (0.075)
0.25 (0.010) MAX.
NOTE 2
0.20 (0.008) MAX.
2.21 (0.087)
1.96 (0.077)
1.14 (0.045)
1.40 (0.055)
CATHODE
ANODE
0.46 (0.018)
0.56 (0.022)
ANODE
1.65 (0.065)
DIA.
1.91 (0.075)
0.20 (0.008) MAX.
0.50 (0.020) REF.
0.18 (0.007)
0.23 (0.009)
0.25 (0.010) MAX.
NOTE 2
2.21 (0.087)
1.96 (0.077)
0.76 (0.030) R.
0.89 (0.035)
0.94 (0.037)
1.24 (0.049)
2.03 (0.080)
1.78 (0.070)
0.63 (0.025)
0.38 (0.015)
2.92
(0.115)
MAX.
2.44 (0.096)
1.88 (0.074)
0.79 (0.031) MAX.
2.08 (0.082)
2.34 (0.092)
0.18 (0.007)
0.23 (0.009)
CATHODE
STRIPE
0.79 (0.031)
0.53 (0.021)
0.63 (0.025)
0.38 (0.015)
2.08 (0.082)
2.34 (0.092)
CATHODE
STRIPE
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETRES (INCHES).
2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD.
5
Absolute Maximum Ratings at TA = 25°C
Parameter
Peak Forward Current[2]
Average Forward Current (IPEAK = 100 mA) [1,2]
DC Forward Current[3,5,6]
Power Dissipation
Reverse Voltage (I R = 100 µA)
Transient Forward Current (10 µs Pulse)[5]
Operating Temperature Range
Storage Temperature Range
LED Junction Temperature
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
SMT Reflow Soldering Temperatures
Convective Reflow
Vapor Phase Reflow
HLMA-xxxx
100
30
50
105
HLMT-xxxx
100
37
50
120
5
500
–40 to +100
–55 to +100
110
Unit
mA
mA
mA
mW
V
mA
°C
°C
°C
260°C for 5 seconds
235°C Peak, above 183°C for 90 seconds
215°C for 3 minutes
Notes:
1. Maximum IAVG at f = 1 kHz.
2. Refer to Figure 5 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 4.
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die
and wire bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
6. Operation at currents below 5 mA is not recommended, please contact your Agilent sales representative.
CATHODE
TAB
NO. ANODE DOWN.
YES. CATHODE DOWN.
Proper Right Angle Mounting to a PC Board to Prevent Protruding Cathode Tab
from Shorting to Anode Connection.
6
Optical Characteristics at TA = 25°C
Part Number
HLMA-QL00-S00xx
HLMA-QL00-TU0xx
HLMA-QL00-TUKxx
HLMA-QL00-TVBxx
HLMA-QL00-TVKxx
HLMA-QL00-UV0xx
HLMA-QL00-UVRxx
HLMA-QL00-UWBxx
HLMT-QL00-T00xx
HLMA-QJ00-S00xx
HLMA-QH00-S00xx
HLMA-QH00-T00xx
HLMA-QH00-UW0xx
HLMT-QH00-T00xx
HLMT-QH00-WX0xx
HLMA-QG00-S00xx
HLMA-QG00-TV0xx
HLMT-QG00-T00xx
HLMA-QF00-S00xx
HLMA-PL00-N00xx
HLMA-PL00-PRRxx
HLMA-PL00-PRXxx
HLMA-PL00-QRXxx
HLMT-PL00-P0Wxx
HLMA-PJ00-N00xx
HLMA-PH00-N00xx
HLMT-PH00-P00xx
HLMA-PG00-N00xx
HLMT-PG00-P00xx
HLMA-PF00-N00xx
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min. Typ. Max.
160 500
250
–
800
250
–
800
250
–
1250
250
–
1250
400
–
1250
400
–
1250
400
–
2000
250 1000
–
160 500
–
160 500
–
250 500
–
400
–
2000
250 500
–
1000
–
3200
160 500
–
125
–
1250
250 1000
–
160 500
–
25
75
–
40
–
200
40
–
200
63
–
200
40
150
–
25
75
–
25
75
–
40
120
–
25
75
–
40
150
–
25
75
–
Total Flux
φV (mlm)
@ 20 mA[2]
Typ.
250
250
250
250
250
250
250
250
800
250
250
250
250
800
800
250
250
800
250
250
250
250
250
800
250
250
800
250
800
250
Color,
Viewing Luminous
Peak
Dominant
Angle
Efficacy
Wavelength Wavelength
2 θ1/2
ηv[5]
[3]
[4]
λpeak (nm)
λd (nm) Degrees
(lm/w)
Typ.
Typ.
Typ.
Typ.
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
592
590
15
480
609
605
15
370
621
615
15
263
621
615
15
263
621
615
15
263
621
615
15
263
621
615
15
263
635
626
15
150
635
626
15
150
635
626
15
150
650
635
15
110
592
590
125
480
592
590
125
480
592
590
125
480
592
590
125
480
592
590
125
480
609
605
125
370
621
615
125
263
621
615
125
263
635
626
125
150
635
626
125
150
640
635
125
110
Notes:
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may
not be aligned with this axis.
2. φv is the total luminous flux output as measured with an integrating sphere.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
4. θ1/2 is the off-axis angle where the liminous intensity is 1/2 the peak intensity.
5. Radiant intensity, Ie, in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt.
7
Electrical Characteristics at TA = 25°C
Part
Number
HLMA-Qx00
HLMT-Qx00
HLMA-Px00
HLMT-Px00
Forward
Reverse
Capacitance
Speed of Response
Voltage
Breakdown
C (pF)
Thermal
τs (ns)
VF (Volts)
Voltage VR (Volts)
VF = 0,
Resistance
Time Constant
@ IF = 20 mA
@ IR = 100 µA
f = 1 MHz RθJ-PIN (°C/W)
e-t/τs
Typ.
Max.
Min.
Typ.
Typ.
Typ.
Typ.
1.9
2.4
5
25
40
170
13
2.0
2.4
5
20
70
170
13
1.9
2.4
5
25
40
170
13
2.0
2.4
5
20
70
170
13
1.0
REDDISH
ORANGE
AMBER
RELATIVE INTENSITY
ORANGE
RED 626 nm
RED 635 nm
0.5
0
550
600
650
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Wavelength.
700
8
100
IF – FORWARD CURRENT – mA
IF – FORWARD CURRENT – mA
100
80
60
40
20
0
1.0
1.5
2.0
80
70
60
50
40
30
20
10
0
1.5
3.0
2.5
90
VF – FORWARD VOLTAGE – V
Figure 2a. Forward Current vs.
Forward Voltage. HLMA-xxxx.
2.0
1.5
1.0
0.5
0
10
30
20
3.0
2.0
1.0
0
50
40
IF – FORWARD CURRENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
3.5
3.0
4.0
Figure 3a. Relative Luminous
Intensity vs. DC Forward Current.
HLMA-xxxx.
20
30
40
60
50
Figure 3b. Relative Luminous
Intensity vs. DC Forward Current.
HLMT-xxxx.
IAVG = AVERAGE CURRENT – mA
f > 1 KHz
30
20
10
75
100
IPEAK – PEAK FORWARD CURRENT – mA
Figure 5a. Maximum Average Current
vs. Peak Forward Current for
HLMA-xxxx.
40
RθJ-A = 380° C/W
30
RθJ-A = 476° C/W
20
10
f > 1 KHz
40
30
20
f > 300 Hz
f > 100 Hz
10
0
50
58
67
75
83
92
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
Figure 4. Maximum Forward Current
vs. Ambient Temperature.
50
40
0
50
10
IF – DC FORWARD CURRENT – mA
50
50
0
0
IF – DC FORWARD CURRENT – mA
IAVG – AVERAGE CURRENT – mA
2.5
Figure 2b. Forward Current vs.
Forward Voltage. HLMT-xxxx.
2.5
0
2.0
VF – FORWARD VOLTAGE – V
100
IPEAK – PEAK FORWARD CURRENT – mA
Figure 5b. Maximum Average Current
vs. Peak Forward Current for
HLMT-xxxx.
9
1.0
NORMALIZED INTENSITY
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-50
-40
-30
-20
-10
0
10
20
30
40
50
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Relative Luminous Intensity vs. Angular Displacement for 15° Device.
1.1
NORMALIZED INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100 90 80 70 60 50 40 30 20 10
0 10 20 30 40 50 60 70 80 90 100
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Relative Luminous Intensity vs. Angular Displacement for 125° Device.
10
Intensity Bin Limits
Bin
N
P
Q
R
S
T
U
V
W
X
Y
Color Bin Limits
Min.
25
40
63
100
160
250
400
630
1000
1600
2500
Max.
50
80
125
200
320
500
800
1250
2000
3200
5000
Package
Yellow
Orange
Bin
0
3
2
4
6
7
0
2
3
4
5
Min.
Max.
Full Distribution
584.0
587.5
586.5
590.0
589.0
592.5
591.5
595.0
594.0
597.5
Full Distribution
599.0
602.5
601.5
604.0
603.8
608.2
606.8
611.2
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Straight Leads, Bulk Packaging, Quantity of 500 Parts
11
Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
12
Gull Wing Leads, Bulk Packaging, Quantity of 500 Parts
14
Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
21
Yoke Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
22
Yoke Leads, Bulk Packaging, Quantity of 500 Parts
24
Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
31
Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel
32
Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts
34
Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
October 24, 2001
Obsoletes 5988-4038EN
5988-4548EN
Similar pages