CREE FC14971 Florentina sery Datasheet

PRODUCT DATASHEET
Florentina series
last update 15/9/2016
DETAILS
Product Number
FC14971_FLORENTINA-2X2-RS
Family
Florentina
Type
Pack
Color
black
Diameter
95,57x95,57 mm
Height
17,72 mm
Style
square
Optic Material
Holder Material
Fastening
screw, pin
Status
production ready
ROHS Comliant
Yes
Date Updated
15/09/2016
OPTICAL PROPERTIES
Viewing
Light
Effi-
LED
Angle
Beam
ciency
cd/lm
Connector
XP-L
16 deg
82 %
8.800
-
XHP35 HD
17 deg
83 %
6.800
-
LUXEON TX
10 deg
85 %
17.100
-
Oslon Square EC
10 deg
84 %
18.700
-
June 9th 2017 5:34 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1
Ledil Oy
Salorankatu 10
24240 SALO, Finland
http://www.ledil.com
email: [email protected]
FAX: +358-2-733 8001
A
B
C
D
E
F
G
H
95.57
2
4
40
4
20
LED middle position
1
67
40
83.52
95.57
3
3
3
3
.
2
2
Optional attachment 1
Optional attachment 2
Isometric view
Scale: 1:1
Assembly:
1. Attach lenses by pressing them down until they snap into place.
2. Screw the holder (with lenses assembled) to PCB. Inspect that the positioning
pins are securely in their holes.
3. Press the shade down on the holder until they are securely attached.
2
Optional side attachment: The holder can also be attached with DIN 7985 M3 nuts
3.
1. One nut per side for rotational attachment
2. Two per side for fixed beam direction
9.9
31.17
2
83.59
3
Recommendations:
Side view
16.88
20
40
Screw type DIN 7985 M3, max. torque 0.6Nm
Compatible with Strada-2X2MX PCB
Tolerances if not otherwise shown
According to DIN ISO 2768-1
Linear measures:
up to 30mm class M, otherwise class C
According to DIN ISO 2768-2
Form and position: class L
1
THIRD ANGLE PROJECTION:
INDEX PART NO DESCRIPTION
1
2
3
H
Isometric view
Scale: 1:1
G
C14734
C14735
CMC / MRK lenses
FLORENTINA-2X2-SHD
FLORENTINA-2X2-HLD
MATERIAL
PC
PC
COLOUR
black
black
This drawing is the property
of LEDiL Oy. It may not be
reproduced, copied or
communicated without a written
agreement with LEDiL Oy.
Ledil Oy
Salorankatu 10
FIN 24240 SALO
Finland
DRAWING TITLE
FLORENTINA-2x2 assembly
SIZE
A3
SCALE
1
PART NUMBER
1:1 WEIGHT
-
B
SHEET
A
1/1
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
Similar pages