Fujitsu LZ-B12WS-KHV-UC Power relay 1 pole-1, 3, 5, 10 a(medium load control) Datasheet

POWER RELAY
1 POLE— 1, 3, 5, 10 A
(MEDIUM LOAD CONTROL)
LZ SERIES
RoHS compliant
n FEATURES
l
l
l
l
l
l
l
l
UL, CSA, SEV recognized
4 kinds of contact ratings
—Low level to 10 amps switching
Standard and high sensitivity types available
High surge strength version available
UL class B (130°C) insulation type available (only plastic
sealed type)
Printed circuit terminals—fits grid with 0.1 inch
Plastic sealed type available
Lead Free since date code: 0437L2
Please see page 9 for more information
n ORDERING INFORMATION
[Example]
LZ – B
(a)
(b)
12
(c)
H
(d)
M
(e)
S
(f )
E – K HV – UC
(g)
(h) ( i )
(j)
(a)
Series Name
LZ : LZ Series
(b)
Coil Heat Proof Class
Nil : Standard type
B : UL class B insulation type (130°C)
(c)
Nominal Voltage
Refer to the COIL DATA CHART
(d)
Contact Rating
Nil : 3 A
H :5A
V : 10 A (standard coil power only)
W : 1 A (bifurcated)
(e)
Contact Arrangement
Nil : 1 form C (SPDT)
M : 1 form A (SPST-NO)
( f)
Coil Power
Nil : Standard type (450 to 600 mW)
S : High sensitive type (330 mW)
(g)
Contact Material (Rating)
Nil : Gold overlay silver-palladium (1A) (only LZ-W)
Nil : Gold overlay silver-nickel (3 A, 5 A)
Nil : Silver alloy (10 A) (only LZ-V) (contains cadmium)
E : Silver-nickel (3 A, 5 A)
(h)
Enclosure
Nil : Flux free type
K : Plastic sealed type (recommended for new designs)
C : Plastic sealed type (with tape)
(i)
Surge Strength
Nil : Standard type (4,000 V)
HV : High surge strength type (6,000 V)
( j)
Standard
UC : UL, CSA approved type
1
LZ SERIES
n COIL DATA CHART
LZ Standard
MODEL
Single
Bifurcated
Nominal
Voltage
1 A Type
Coil
Resistance
(±10%)
Must
Operate
Voltage*
Must
Release
Voltage*
Nominal
Power
10 A Type
5 A Type
3 A Type
LZ-(B) 1.5VM
LZ-(B)1.5H(M)(E)
LZ-(B) 1.5(M)(E)
LZ-(B)1.5W(M)
1.5 VDC
5
0.97 VDC
0.08 VDC
450 mW
LZ-(B) 3VM
LZ-(B) 3H(M)(E)
LZ-(B) 3 (M)(E)
LZ-(B) 3 W(M)
3 VDC
20
1.95 VDC
0.15 VDC
450 mW
LZ-(B) 5VM
LZ-(B) 5H(M)(E)
LZ-(B) 5 (M)(E)
LZ-(B) 5 W(M)
5 VDC
56
3.25 VDC
0.25 VDC
450 mW
LZ-(B) 6VM
LZ-(B) 6H(M)(E)
LZ-(B) 6 (M)(E)
LZ-(B) 6 W(M)
6 VDC
80
3.9 VDC
0.3 VDC
450 mW
LZ-(B) 9VM
LZ-(B) 9H(M)(E)
LZ-(B) 9 (M)(E)
LZ-(B) 9 W(M)
9 VDC
180
5.85 VDC
0.45 VDC
450 mW
LZ-(B) 12VM
LZ-(B) 12H(M)(E)
LZ-(B 12 (M)(E)
LZ-(B) 12 W(M)
1 2 VD C
320
7.8 VDC
0 . 6 V DC
450 mW
LZ-(B) 18VM
LZ-(B) 18H(M)(E)
LZ-(B) 18 (M)(E)
LZ-(B) 18 W(M)
1 8 VD C
720
11.7 VDC
0 . 9 V DC
450 mW
LZ-(B) 24VM
LZ-(B) 24H(M)(E)
LZ-(B) 24 (M)(E)
LZ-(B) 24 W(M)
2 4 VD C
1,280
15.6 VDC
1.2 VDC
450 mW
LZ-(B) 48VM
LZ-(B) 48H(M)(E)
LZ-(B) 48 (M)(E)
LZ-(B) 48W(M)
4 8 VD C
3,800
28.8 VDC
2.4 VDC
600 mW
LZ-(B)100VM
LZ-(B)100H(M)(E)
LZ-(B)100(M)(E)
LZ-(B)100W(M)
100VDC
22,200
65.0 VDC
5 . 0 V DC
450 mW
1.5 VDC
5
1.2 VDC 0.08 VDC
450 mW
LZ-(B) 3V
3 VDC
20
2.4 VDC 0.15 VDC
450 mW
LZ-(B) 5V
5 VDC
56
4.0 VDC 0.25 VDC
450 mW
LZ-(B) 6V
6 VDC
80
4.8 VDC 0.3 VDC
450 mW
LZ-(B) 1.5 V
LZ-(B) 9V
9 VDC
180
7.2 VDC 0.45 VDC
450 mW
LZ-(B) 12V
1 2 V DC
320
9.6 VDC 0.6 VDC
450 mW
LZ-(B) 18V
1 8 V DC
720
14.4 VDC 0.9 VDC
450 mW
LZ-(B) 24V
2 4 V DC
1,280
19.2 VDC 1.2 VDC
450 mW
LZ-(B) 48V
4 8 V DC
3,800
38.4 VDC 2.4 VDC
600 mW
LZ-(B) 100V
100VDC
22,200
80.0 VDC 5.0 VDC
450 mW
Must
Operate
Voltage*
Must
Release
Voltage*
Nominal
Power
LZ-( )S High Sensitive
MODEL
Single
10 A
Type
Bifurcated
Nominal
Voltage
1 A Type
Coil
Resistance
(±10%)
5 A Type
3 A Type
LZ-(B)1.5H(M)S, (E)
LZ-(B)1.5(M)S, (E)
LZ-(B)1.5W(M)S
1.5 VDC
6.8
0.97 VDC
0.08 VDC
330 mW
LZ-(B) 3H(M)S, (E)
LZ-(B) 3 (M)S, (E)
LZ-(B) 3 W(M)S
3 VDC
27
1.95 VDC
0.15 VDC
330 mW
LZ-(B) 5H(M)S, (E)
LZ-(B) 5 (M)S, (E)
LZ-(B) 5 W(M)S
5 VDC
80
3.25 VDC
0.25 VDC
330 mW
LZ-(B) 6H(M)S, (E)
LZ-(B) 6(M)S, (E)
LZ-(B) 6 W(M)S
6 VDC
110
3.9 VDC
0 . 3 VD C
330 mW
LZ-(B) \9H(M)S, (E)
LZ-(B) 9(M)S, (E)
LZ-(B) 9 W(M)S
9 VDC
250
5.85 VDC
0.45 VDC
330 mW
LZ-(B) 12H(M)S, (E)
LZ-(B 12(M)S, (E)
LZ-(B)12 W(M)S
12 VDC
440
7.8 VDC
0 . 6 V DC
330 mW
LZ-(B) 18H(M)S, (E)
LZ-(B)18 (M)S, (E)
LZ-(B)18 W(M)S
18 VDC
990
11.7 VDC
0 . 9 V DC
330 mW
LZ-(B) 24H(M)S, (E)
LZ-(B) 24(M)S, (E)
LZ-(B)24 W(M)S
24 VDC
1,780
15.6 VDC
1.2 VDC
330 mW
Note : All values in the table are measured at 20°C.
*: Specified values are subject to pulse wave voltage.
LZ SERIES
n SPECIFICATIONS
LZ-( )Type (Standard Type)
Item
Contact
10 A Type
5 A Type
3 A Type
1 A Type
LZ-()V LZ-( )VM LZ-( )H, LZ-( )HE LZ( ), LZ-( )E
LZ-( )W
Arrangement 1 form A (SPST-NO) or 1 form C (SPDT)
Gold overlay
alloy
Material
Silver alloy Gold overlay silver Silver alloy (LZ-HE, E) silver-palladium
(contains cadmium) Configuration
Single
Single (crossbar)
Resistance (initial) (at 1 A 6 VDC) Maximum 100 mΩ Maximum 70 mΩ (LZ-H,LZ)
Maximum 100 mΩ (LZ-HE, E)
Bifurcated (crossbar)
Max. 50 mΩ
Rating (resistive) 10 A 120 VAC/24 VDC 5 A 120 VAC/24 VDC 3 A 120 VAC/30 VDC 1 A 120 VAC/30 VDC
1/4 HP 120 VAC 1/8 HP 120 VAC 1/10 HP 120 VAC
Maximum Carrying Current
Maximum Switching Power
Coil
10 A 5 A
1,680 VA, 240 W 960 VA, 120 W Life
Other
600 VA, 90 W 190 VA, 30 W
Maximum Switching Voltage
250 VAC, 150 VDC
Maximum Switching Current
10 A 5 A
Minimum Switching Load*1
100 mA 5 VDC 10 mA 5 VDC (LZ-H)
10 mA 5 VDC (LZ-)
100 mA 5 VDC (LZ-HE) 100mA 5VDC (LZ-E)
Nominal Power (at 20°C)
450 to 600 mW
Operate Power (at 20°C) 290 to 390mW
Time Value
1 A
3 A 1 A
0.1 mA 100 mVDC
170 to 220 mW
Operating Temperature
–30°C to +70°C (no frost) (refer to the CHARATERISTIC DATA)
Operate (at nominal voltage)
Maximum 7 ms
Release (at nominal voltage)
Maximum 4 ms
Mechanical 2 x 10 7 operations minimum
Electrical
1 x 10 5 operations minimum (contact rating)
Vibration
Misoperation
Resistance Endurance
10 to 55 Hz (double amplitude of 3.3 mm)
Shock Misoperation
Resistance Endurance
100 m/s 2 (11 ±1 ms)
1,000 m/s 2 (6 ±1 ms)
Weight
Approximately 7.7g
10 to 55 Hz (double amplitude of 3.3 mm)
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
LZ SERIES
n
SPECIFICATIONS
LZ-( ) S Type (High Sensitive Type)
Item
Contact
Time Value
Insulation
Other
1 A Type
LZ-( )HS, LZ( )HSE
LZ-( )S, LZ-( )SE
LZ-( )WS
1 form A (SPST-NO) or 1 form C (SPDT)
Material
Gold overlay silver nickel Silver nickel (LZ-HSE, SE) Gold overlay silver-palladium
Configuration
Single (crossbar)
Bifurcated (crossbar)
Maximum 70 mΩ (LZ-HS, S)
Maximum 100 mΩ (LZ-HSE, SE)
Maximum 50 mΩ
Rating Resistive
5 A 120 VAC/24 VDC
1 A 120 VAC/30 VDC
Motor Load
1/8 HP 120 VAC 1/10 HP 120 VAC
Maximum Carrying Current
5A
1 A
Maximum Switching Power
960 VA, 120 W 600 VA, 90 W
190 VA, 30 W
Maximum Switching Voltage
250 VAC, 150 VDC
Maximum Switching Current
5 A 3 A 1 A
Minimum Switching Load*1
10 mA 5 VDC (LZ-HS, S)
100 mA 5 VDC (LZ-HSE, SE)
Nominal Power (at 20°C)
330 mW
Operate Power (at 20°C)
140 mW
Operating Temperature
–30°C to +80°C (no frost) (refer to the CHARACTERISTIC DATA)
Operate (at nominal voltage)
Maximum 7 ms
Release (at nominal voltage)
Maximum 4 ms
Resistance
Minimum 250 MΩ
Dielectric between open contacts
Strength between coil and contacts
750 VAC 1 minute
Surge Strength
Life
3 A Type
Arrangement
Resistance (initial) (at 1 A 6 VDC)
Coil
5 A Type
3 A 120 VAC/30 VDC
2,000 VAC 1 minute
Standard type : 4,000 V (at 1.2 × 50 µs)
High surge strength type: 6,000 V (at 1.2× 50 µs)
Mechanical
2 × 10 7 operations minimum
Electrical
1× 10 5 operations minimum (rated load)
Vibration
Misoperation
0.1 mA 100 mVDC
10 to 55 Hz (double amplitude of 3.3 mm)
Resistance Endurance
10 to 55 Hz (double amplitude of 3.3 mm)
Shock Misoperation
100 m/s 2 (11 ±1 ms)
Resistance Endurance
1,000 m/s 2 ( 6 ±1 ms)
Weight
Approximately 7.7 g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load
before production since reference values may vary according to switching frequencies, environmental conditions and
expected reliability levels.
LZ SERIES
n
INSULATION
LZ: Standard type
Item
10A
5A
Resistance (500VDC)
Min. 250 MΩ
Dielectric
strength
open contacts
750 VAC 1min.
coil and contacts
2,000 VAC 1 min.
Surge voltage
3A
1A
Standard: 4,000V, High Surge: 6,000V
1.2 x 50µs standard wave
LZ-( )S: High sensitive type
Item
10A
Resistance (500VDC)
Min. 250 MΩ
Dielectric
strength
open contacts
750 VAC 1min.
coil and contacts
2,000 VAC 1 min.
Surge voltage
5A
3A
Standard: 4,000V, High Surge: 6,000V
1.2 x 50µs standard wave
n SAFETY STANDARD AND FILE NUMBERS
Type
Compliance
Contact rating
UL
UL 508
E 56149, E 45026
CSA
C22.2 No. 14
LR 35579
Flammability: UL 94-V0 (plastics)
[LZ-( )W, LZ-( )WS]
0.8A, 240VDC (resistive)
1A, 120VAC / 30VDC (resistive)
[LZ-( ), LZ-( )S]
2.5A, 240 VDC (resistive)
3A, 120 VAC / 30VDC (resistive)
1/10 HP, 120VAC/2400VAC
Pilot duty: D150
[LZ-( ), LZ-( )S]
2.5A, 240 VAC (resistive)
3A, 120 VAC / 30VDC (resistive)
1/10 HP, 120VAC/2400VAC
Pilot duty: D150
[LZ-( )V]
7A, 240 VDC (resistive)
10A, 120 VAC / 30VDC (resistive)
1/4 HP, 120VAC/2400VAC
Also complies with SEV
LZ SERIES
n CHARACTERISTIC DATA
LZ SERIES
n REFERENCE DATA
LZ SERIES
n DIMENSIONS
l Dimensions
LZ-M type
l Schematics
(BOTTOM VIEW)
l PC board mounting
hole layout
(BOTTOM VIEW)
LZ-M-K, LZ-M-C type (Plastic sealed type)
LZ type
LZ-K, LZ-C type (Plastic sealed type)
Unit: mm
LZ SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condtion
Flow Solder condtion:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
LZ SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. November 30, 2007
10
Similar pages